[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Problem with ADC-6 with Lisa M 2 similar configura

From: Felix Ruess
Subject: Re: [Paparazzi-devel] Problem with ADC-6 with Lisa M 2 similar configuration
Date: Mon, 1 Sep 2014 21:32:08 +0200

Hi Julien,

what paparazzi version are you using?
Where did you defineĀ USE_ADC_6?
It should be a <define name="USE_ADC_6"/> in your firmware section and not under a normal section so it will end up as a global/cmdline define instead of only in the generated airframe file.

Cheers, Felix

On Mon, Sep 1, 2014 at 8:54 PM, huotj <address@hidden> wrote:

I try to use IR on a Lisa M 2 similar configuration. What I mean with
similar configuration is we took the lisa m 2 and slightly modified it for
better input protection and a bit of customisation.

I use the PC0(ADC2) / PC1(ADC3) / PC2(ADC6) for IR1, IR2 and IRTOP. There is
no problem with the ADC2 and 3, but it only read 0 at the ADC6. Directly on
the microchip pin (pc2), there is 3.3 volt and it still read 0.

I declared the variable : USE_ADC_6.

Any idea ?

Thank you


View this message in context:
Sent from the paparazzi-devel mailing list archive at

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]