|Subject:||Re: [Paparazzi-devel] spektrum channel assignment|
|Date:||Wed, 10 Sep 2014 07:34:37 +0930|
What transmitter do you have?
In the dozen or so transmitters I tested the channels numbers were assigned to the sticks in the correct order for the mode of the transmitter. I checked against modes 1, 2 and 3 transmitters so it would be very useful to know what model of transmitter you have.
I am suspecting that possibly you might have some sort of mixes set in your transmitter and this is what is causing confusion.
If you have the transmitter set in Heli mode then it will mix several channels together. Most notably throttle and pitch and depending on the swash plate you can be mixing pitch in with aileron and elevator.
So here is the thing… even for a paparazzi rotor craft you set the transmitter to be in fixed wing mode. With no mixing on the ailerons.
Please send some feedback on this as otherwise it would seem the zero conf solution that spektrum provides is broken. In fact it is hard to see how your transmitter can function with a Spektrum receiver which only knows the channels from the numbers embedded in the data stream i.e. the same data paparazzi is using.
I am putting money on Heli mode being set or some other mixing.
On 10 Sep 2014, at 5:54 am, Felix Ruess <address@hidden> wrote:
|[Prev in Thread]||Current Thread||[Next in Thread]|