[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Xsens MTi-G-700

From: Lazy
Subject: Re: [Paparazzi-devel] Xsens MTi-G-700
Date: Sat, 27 Sep 2014 09:32:35 -0700 (MST)

Dear Gautier 
Modules compiled and uploaded correctly, but...
After 3D fix i receive messages:
Some time also: File "", line 523, characters 4-10: Assertion failed
PFD frozen in strange position, any reaction for movement.
Hardware is: YAPA 2 board, 3DR modems in transparent mode, Xsens MTi-700
Firmware section of my config:
<modules main_freq="100">
        <firmware name="fixedwing">
                <target name="ap" board="yapa_2.0"/>
                <target name="sim" board="pc"/>
                <define name="STRONG_WIND"/>
                <define name="WIND_INFO"/>
                <define name="WIND_INFO_RET"/>
                <define name="LOITER_TRIM"/>
                <define name="TUNE_AGRESSIVE_CLIMB"/>
                <define name="AGR_CLIMB"/>
                <define name="ALT_KALMAN"/>
                <define name="USE_GPS_XSENS"/>

                <configure name="SYS_TIME_LED" value="1"/>
                <configure name="GPS_LED" value="2"/>

                <subsystem name="radio_control" type="ppm"/>

                <subsystem name="telemetry" type="transparent">
                        <configure name="MODEM_BAUD" value="B19200"/>
                        <configure name="MODEM_PORT" value="UART1"/>

                <subsystem name="control"/>

                 <subsystem name="navigation"/>
                <subsystem name="ins" type="xsens700">
                        <configure name="XSENS_UART_NR" value="0"/>
                        <configure name="XSENS_UART_BAUD" value="B230400"/>


Sincerely you

View this message in context:
Sent from the paparazzi-devel mailing list archive at

reply via email to

[Prev in Thread] Current Thread [Next in Thread]