[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Altitude estimation

From: Balazs GATI
Subject: Re: [Paparazzi-devel] Altitude estimation
Date: Tue, 30 Sep 2014 09:24:01 +0200
User-agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.6.0

No idea except the missing GPS signal. Do you experience it by fixed GPS signal, too?


2014.09.30. 8:26 keltezéssel, afishindouban írta:
Here talking about BARO and altitude estimation. I want to share with my
issue. This issue has been bother me for a long time.

     <target name="ap"   board="lisa_m_2.0">

       <configure name="LISA_M_BARO" value="BARO_MS5611_SPI"/>
       <configure name="PERIODIC_FREQUENCY" value="120"/>
       <configure name="AHRS_PROPAGATE_FREQUENCY" value="100"/>
       <configure name="AHRS_CORRECT_FREQUENCY" value="100"/>
       <define name="DEBUG"/>

try this is in V5.2, Microjet_lisa_m configuration. I only add a DEBUG flag.
This is a LISA/M2 with AspirinV2.2 from transition Robot.

you can see this strange real time plot result.

as you can see, BARO_MS5611 pressure and temp look normal (pressure has one
abnormal peak). but estimator.Z has many strange peak , that bother me a
lot. what could be the reason of it ? the AP board is one the table without
moving, no light to the sensor side. I only connect Xbee to the board and
power up. no any other thing....

View this message in context:
Sent from the paparazzi-devel mailing list archive at

Paparazzi-devel mailing list

Balazs GATI, PhD
associate professor
     Department of Aeronautics, Naval Architecture and Railway Vehicles
     Budapest University of Technology and Economics

Address:   Budapest
          Stoczek u 6. J. ép. 423
Tel:       +(36)-1-463-1960
Fax:       +(36)-1-463-3080

reply via email to

[Prev in Thread] Current Thread [Next in Thread]