[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Paparazzi Stand Alone GPS also known as GPS13 not

From: Chris Gough
Subject: Re: [Paparazzi-devel] Paparazzi Stand Alone GPS also known as GPS13 not working
Date: Mon, 5 Jan 2015 17:25:09 +1100

does it draw any power? if not, keep going with the continuity testing
for vcc and ground (plug, pcb all the way to the legs on the GPS
module). If yes, keep going with continuity test on tx/rx lines back
to the module. Also check for shorts, inspect with microscope/loupe

Chris Gough

On Mon, Jan 5, 2015 at 2:17 PM, Joseph Muhlhausen <address@hidden> wrote:
> Hi everyone,
> My GPS stopped working today after working perfectly for a year and a
> half.... The GCS shows "NO FIX" and no data comes in from the GPS. I have
> started troubleshooting to see what could be the problem.
> - I don't think it is software related because since the last flight I
> didn't flash a new firmware onto my autopilot.
> - I have done a continuity test on the wires running from the GPS to the
> autopilot (Umarim Lite 2)
> I am not sure what to try next. Do you have any suggestions?
> Thank you,
> Joseph
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden


reply via email to

[Prev in Thread] Current Thread [Next in Thread]