Thanks Freek,
But how can I define the MFG ID in the airframe file and USB Dongle ?
For airframe file, I uncomment the following line ? <!--define name="RADIO_TRANSMITTER_ID" value="1335259868"/--> For USB dongle ?
Thanks in advance Best regards Nicolas
Hi,You can define a MFG ID in the USB dongle and in the airframe file. If they are the same they should be able to communicate without a transmitter. I'm not sure how well the uplink works without transmitter. But I'm developing a simple protocol 1-to-1, so without a transmitter with fast up/down-link. Hoping to finish that this week, and then need to clean it up a lot for adding it to master.
Greetings, Freek
On Mon Jan 26 2015 at 1:31:11 PM Nicolas Quendez < address@hidden> wrote:
Hi all,
I would like to use Lisa/S without any transmitter. But it seems that the binding between the Lisa/S modem and the USBRF is set during the binding process with a DSM RC transmitter (that I do not have, I use a Hitec Aurora 9 transmitter, but for this application I do not want to use any RC transmitter).
So I need to set the same MFG ID in both Lisa/S and USBRF dongle. Some ideas to do so ?
Thanks in advance
Best regards
Nicolas
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
|