[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Add a delay on power up to avoid bricking xbee

From: Joseph Muhlhausen
Subject: Re: [Paparazzi-devel] Add a delay on power up to avoid bricking xbee
Date: Thu, 19 Feb 2015 14:07:18 -0500

I found a solution.

in v5.0 I modified paparazzi/sw/airborne/firmware/fixedwing/main_ap.c

after line 227 #if defined DATALINK I added:

It works although I'm not sure it's the best fix.

On Wed, Feb 18, 2015 at 12:33 AM, Joseph Muhlhausen <address@hidden> wrote:
Hi Guys,

I have been having some trouble with my xbee. It bricks every time I power up the board, but works fine if I power up the board first and then connect the xbee. It might be some sort of signal before power issue.

I am not very familiar with C. How should I got about adding a delay of 1 second before sending a signal through the xbee? Would sleep(1000) at the beginning of telemetry.c do the trick?


reply via email to

[Prev in Thread] Current Thread [Next in Thread]