[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Blank GCS with Lisa/S

From: christopher . d . gough
Subject: Re: [Paparazzi-devel] Blank GCS with Lisa/S
Date: Mon, 2 Mar 2015 16:51:52 +1100

Hi Beryl,

I don't have a Lisa/S so can't help much, but the symptom you describe is 
exactly what's expected with no data link. Sounds like you are on the right 

Chris Gough

> On 2 Mar 2015, at 1:18 pm, beryl.wicaksono <address@hidden> wrote:
> Hi all!
> I need help to fix this problem. My GCS in paparazzi doesn't show anything
> when executing LadyLisa example. It just shows blank GCS and says "Waiting
> for telemetry".
> I use Lisa/S for autopilot, Superbit USBRF as telemetry, and Spektrum DX6i
> for remote control. I have successfully bind the transmitter to Superbit
> USBRF and also bind the transmitter to Lisa/S, so it means that Lisa/S and
> Superbit USBRF will communicate each other, right?. When I execute "Flight
> address@hidden" session, the GCS just shows a black screen with "Waiting
> for telemetry" message. There is no error in running Data Link (I have
> changed /dev/ttyUSB0 to /dev/ttyACM0).
> info : I just change in Airframe file as bellow.
> 1. Add binding parameter
> 2. Change <subsystem name="telemetry" type="superbitrf"/> becomes <subsystem
> name="telemetry" type="transparent"/>  (I have tried with superbitrf , and
> it also shows a blank GCS)
> I attach the screen-shot of my paparazzi. I need your help so much, guys. 
> <>
> -----
> Beryl Wicaksono
> Electrical Engineering
> Bandung Institute of Technology
> --
> View this message in context: 
> Sent from the paparazzi-devel mailing list archive at
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

reply via email to

[Prev in Thread] Current Thread [Next in Thread]