[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Blank GCS with Lisa/S

From: beryl.wicaksono
Subject: Re: [Paparazzi-devel] Blank GCS with Lisa/S
Date: Tue, 3 Mar 2015 21:29:05 -0700 (MST)

Here the screen shot after the GCS starting.
Is there any something wrong?

How's the setup of the hardware? So I just connect BMP to Lisa/S via SWD
port (like flashing)?

Yes, I have setup the DX6i 's modulation to DSM2. 

Thank you,


Garrosh wrote
> Hello Beryl,
> First, I'd like to ask you to post the output of "dmesg | tail" just after 
> you've started your GCS. 
> When talking to the Lisa via BMP, you have at least 2 options: through gdb
> or 
> through paparazzi. To simplify the diagnosing process, I'd recommend using
> gdb 
> to upload and run your code on the Lisa S, see here : 
> Next, you may try to run your code with paparazzi through your BMP, you
> can 
> look here for more information : 
> Your usbrf is running on DSM2, but your controller may not. Did you verify 
> that you set your controller too?
> In the link about the telemetry, it also tells you about baudrate.
> Good luck!
> Sam
> On March 3, 2015 07:01:26 AM beryl.wicaksono wrote:
> _______________________________________________
> Paparazzi-devel mailing list

> Paparazzi-devel@


Beryl Wicaksono
Electrical Engineering
Bandung Institute of Technology
View this message in context:
Sent from the paparazzi-devel mailing list archive at

reply via email to

[Prev in Thread] Current Thread [Next in Thread]