[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] MS4525 Airspeed sensor drivers

From: Felix Ruess
Subject: Re: [Paparazzi-devel] MS4525 Airspeed sensor drivers
Date: Mon, 29 Jun 2015 17:50:53 +0200

See also

On Mon, Jun 29, 2015 at 4:43 PM, Eduardo lavratti <address@hidden> wrote:
MS5611 is a barometer

To use MS4525 you need to put this lines in modules section

        <load name="airspeed_ms45xx_i2c.xml">
            <define name="MS45XX_I2C_DEV" value="i2c1"/>
            <define name="MS45XX_PRESSURE_RANGE" value="1"/>
            <define name="MS45XX_OUTPUT_TYPE" value="0"/>
            <define name="MS45XX_PRESSURE_OFFSET" value="8549.0"/>  <!-- 8542.0-->

Date: Mon, 29 Jun 2015 09:40:46 -0400
From: address@hidden
To: address@hidden
Subject: [Paparazzi-devel] MS4525 Airspeed sensor drivers

I am looking at adding an airspeed sensor to my setup and the Eagle Tree does not seem to be working well (seeing all the comments on the mailing list).

I had a look at the measurement specialty MS4525DO mentioned on the wiki. I cannot find drivers for it in the module section, but I was wondering if I can just use MS5611 drivers instead?


_______________________________________________ Paparazzi-devel mailing list address@hidden

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]