[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] cannot reach 100% throttle on takeoff

From: Tobias
Subject: Re: [Paparazzi-devel] cannot reach 100% throttle on takeoff
Date: Thu, 6 Aug 2015 10:58:22 +0200

Hi Joseph,

could you check if you have defined:
    <define name="POWER_CTL_BAT_NOMINAL" value="11.1" unit="volt"/>
if so, you probably have a slightly higher voltage than 11.1V on takeoff - 
leading to an reduced takeoff power to match the thrust you would get at 11.1V.
You could just delete it, but be aware that 100% throttle than has different 
thrust values depending on your input voltageā€¦ 
This is usually not a big problem but not the nicest way to do it.

cheers Tobi

reply via email to

[Prev in Thread] Current Thread [Next in Thread]