[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Apogee RC not Working Properly

From: Gautier Hattenberger
Subject: Re: [Paparazzi-devel] Apogee RC not Working Properly
Date: Wed, 9 Mar 2016 10:41:23 +0100
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.5.1


The wiring seems correct. I don't think you need to remove the PPM_IN. But you can remove the bind plug of AUX4 after binding.


Le 04/03/2016 02:57, Pengzhi Tian a écrit :
Hi Gautier,

Thanks for your reply. The receiver I am using is Spektrum 9645 and the
paparazzi version is v5.6.0_stable.

I just tried the binding. Please take a look at the figure and let me know
if I am doing it correct.


Somehow I feel the binding is not consistent. Sometimes the receiver is in
binding mode when I ground the AUX4 + connect both PPM_IN and RX2 to the
receiver. Sometimes the receiver is in binding mode even when I don't ground
the AUX4.

After binding, should I just remove the ground wire for AUX4 or remove
ground wire for AUX4 + disconnect PPM_IN.

Pengzhi Tian

View this message in context:
Sent from the paparazzi-devel mailing list archive at

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]