[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] matek f405 wing

From: Chris
Subject: [Paparazzi-devel] matek f405 wing
Date: Tue, 6 Oct 2020 16:11:43 +0300
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.10.0

Well i almost finished it, everything works fine with the exception of the BMP280.

It works but it only gives correct temperature, the pressure reading is very high at 166000 Pascal but it follows the altitude change.

No matter what compensation scheme i am using,  double precision compensation or integer compenstation, i always get the same numbers so either the calibration data are not read correctly or i got a damaged part.

Other than that everything is flight ready, i will post here when i find what is wrong with the BMP280.

Btw it looks like the board has a very strange IMU orientation, perpendicular to the servo leads and probably inverted also because when i let the board sit the artificial horizon creeps until it gets almost inverted, is there any way to change the orientation through software?



reply via email to

[Prev in Thread] Current Thread [Next in Thread]