Dear Yoshi,
yes, indeed. It's Ctrl + R on an English keyboard.
Sorry.
Sincerely,
Oliver
----- Original Message -----
Sent: Tuesday, August 02, 2016 12:42
AM
Subject: Re: PSPPire on Windows: Increase
the number of decimal places ofregression analysis
Dear Oliver, thanks for further details. I suppose that Strg + R
may be Ctrl + R with an English keyboard.
Sincerely Yoshi (sending from my mobile)
On 29 Jul 2016 17:44, "Dr. Oliver Walter" < address@hidden>
wrote:
As Alan wrote: Type
SET FORMAT F22.6
in the
syntax editor and execute this command by clicking "all" or -
after highlighting the command line - "selection" in the menu "run" of
the syntax editor.
You can also press the two keys Strg + R at the
same time (or hold the Strg key and then press the key R) if the
cursor is still in the same command line as the set command .
I
attached a screenshot (but in German) to this message where you can
see what you have to do.
Oliver
----- Original Message
----- From: "Yoshi" <address@hidden> To: <address@hidden> Sent: Friday, July 29, 2016
12:32 AM Subject: RE: PSPPire on Windows: Increase the number of decimal
places ofregression analysis
Hi Oliver and John, thanks for your reply. I'm still
struggling. What I did was as the following and further advice would
be appreciated.
1 On the syntax editor window, File->Open->,
open repairs.sav in c://Program Files/PSPP/share/pspp/examples
(repairs_sav.JPG)
2 Open syntax editor
(File->New->Syntax)
3 On the syntax editor window, enter
command, SET FORMAT F22.6 EXECUTE. (SyntaxEditor1.JPG)
4 On
PSPPire data editor window of repairs.sav,
Analyze-Descriptive Statistics-Crosstabs, Rows: mtbf and Columns:
mttr; 5 Results on PSPPire output viewer of Chi-square tests are only 2
decimal places, e.g. Pearson Chi-Square 210.00, Likelihood Ratio 81.24
etc. (Chi-square1.JPG)
The numbers of decimal places are the
same for other methods including regression analysis.
What I
want to obtain is 6 decimal places results on the Output Viewer window.
Thank you for your further
help.
Sincerely Yoshi
-----Original Message----- From:
John Darrington [mailto:address@hidden] Sent: Tuesday, July 26,
2016 10:51 PM To: Dr. Oliver Walter Cc: Yoshi; address@hidden Subject: Re: PSPPire on Windows:
Increase the number of decimal places ofregression analysis
Yes
of course. :)
You can't give pspp commands to a DOS command
line!!
On Tue, Jul 26, 2016 at 09:40:00AM +0200, Dr. Oliver Walter
wrote: You have to put the command in the syntax editor
of PSPPire and execute it. It works.
Sincerely,
Oliver
-----
Original Message ----- From: "Yoshi" <address@hidden> To: <address@hidden> Sent: Tuesday,
July 26, 2016 9:05 AM Subject: RE: PSPPire on Windows:
Increase the number of decimal places ofregression
analysis
>Thanks John for your
reply. > >I have tried the command
using the Windows command prompt, however, I have
>received the following errors. I conducted SET FORMAT command
before and >after starting of the SPSSire, but
received errors for both. Further reply >will be
appreciated. > >C:\Program
Files\PSPP\bin>SET FORMAT F22.6 >Environment
variable FORMAT F22.6 not defined >
>C:\Program Files\PSPP\bin>PSPPIRE >
>C:\Program Files\PSPP\bin>SET FORMAT F22.6
>Environment variable FORMAT F22.6 not defined
> >Sincerely >Yoshi
> >-----Original Message-----
>From: John Darrington [mailto:address@hidden] >Sent:
Tuesday, July 26, 2016 4:49 PM >To: Yoshi
>Cc: address@hidden >Subject: Re:
PSPPire on Windows: Increase the number of
decimal places of >regression analysis
> >On Tue, Jul 26, 2016 at 12:47:18PM +1200,
Yoshi wrote: > Hi
> > I am using PSPPire on windows
0.10.1-g1082b8. I want to increase the
>number > of decimal places of
regression analysis result, which seems to be set
>to 2 > in the default
setting. > > I have
found the information to increase the results to 6 decimal
>places on > the manual (https://www.gun.org/software/pspp/faq.html#Precision),
>which may > be used for
Command mode version, but I want to know the method for
>the > PSPPire
version. > >
>It is exactly the same method. It works for both pspp and
psppire. > >J'
> > >--
>Avoid eavesdropping. Send strong encryted email.
>PGP Public key ID: 1024D/2DE827B3
>fingerprint = 8797 A26D 0854 2EAB 0285 A290 8A67 719C 2DE8
27B3 >See http://sks-keyservers.net or any PGP
keyserver for public key. >
> >
>_______________________________________________
>Pspp-users mailing list >address@hidden >https://lists.gnu.org/mailman/listinfo/pspp-users
>
_______________________________________________
Pspp-users mailing list address@hidden https://lists.gnu.org/mailman/listinfo/pspp-users
--
Avoid eavesdropping. Send strong encryted email. PGP Public
key ID: 1024D/2DE827B3 fingerprint = 8797 A26D 0854 2EAB 0285
A290 8A67 719C 2DE8 27B3 See http://sks-keyservers.net or any PGP
keyserver for public
key.
--------------------------------------------------------------------------------
_______________________________________________ Pspp-users
mailing list address@hidden https://lists.gnu.org/mailman/listinfo/pspp-users
|