ones that I consider to be trustworthy. You don't have to wait for permission
On Thu, Jun 2, 2022 at 2:01 PM someone <
maffydoit@aol.com> wrote:
>
> Hi
>
> Is the version that appears on the gnu page the "official" release"
>
https://www.gnu.org/software/pspp/get.html>
> and the versions that appear here
>
https://caeis.etech.fh-augsburg.de/downloads/windows/pspp-win-daily/> Are they nightly builds
>
> Any idea when 1/6 will be on the gnu page?
>
> thanks
>
> Gene
>
>
>
> -----Original Message-----
> From: ft gmail <
public.ftr@gmail.com>
> To: someone <
maffydoit@aol.com>;
blp@cs.stanford.edu <
blp@cs.stanford.edu>
> Cc:
pspp-users@gnu.org <
pspp-users@gnu.org>
> Sent: Thu, Jun 2, 2022 4:27 pm
> Subject: Re: pspp-1.6.0 released [stable]
>
> Go to the page Ben mentioned which lists 1.6.
> - ftr
> On 01/06/2022 22:41, someone wrote:
>
> Also, adding my thanks very much to those developing, maintaining this.
>
> On the gnu page
>
https://www.gnu.org/software/pspp/get.html>
> It says
> You can install pspp on Windows 64 Bit via the pspp-1.5.3-g797d4c.exe installer.
>
> So it that was 1.6 version it would say something like PSPP-1.6.something installer?
>
> Thanks
>
> Gene
>
>
>
> -----Original Message-----
> From: Ben Pfaff <
blp@cs.stanford.edu>
> To: ft gmail <
public.ftr@gmail.com>
> Cc: pspp-users <
pspp-users@gnu.org>
> Sent: Wed, Jun 1, 2022 12:11 pm
> Subject: Re: pspp-1.6.0 released [stable]
>
> I expect a build of 1.6.0 to be available at
>
https://caeis.etech.fh-augsburg.de/downloads/windows/pspp-win-daily> within a day.
>
>
> On Wed, Jun 1, 2022 at 8:53 AM ft gmail <
public.ftr@gmail.com> wrote:
> >
> > I can only support what John said. Thank you.
> >
> > The windows version is not ready, if I understand well.
> >
> > Any ideas how to use the 1.6 version in windows ?
> >
> > Regards,
> >
> > ftr
> >
> > On 01/06/2022 15:40,
jhwhite@techwriteinc.com wrote:
> > > Congratulations, Ben and team -- you should be proud of your hard work.
> > >
> > > Take care,
> > > John
> > > ___________________________
> > >
> > >
> > >
> > > Email:
jhwhite@techwriteinc.com> > >
> > > -----Original Message-----
> > > From: Pspp-users <pspp-users-bounces+jhwhite=
techwriteinc.com@gnu.org> On
> > > Behalf Of Ben Pfaff
> > > Sent: Wednesday, June 1, 2022 1:46 AM
> > > To:
info-gnu@gnu.org;
pspp-dev@gnu.org;
pspp-users@gnu.org;
> > >
pspp-announce@gnu.org> > > Subject: pspp-1.6.0 released [stable]
> > >
> > > I'm very pleased to announce the release of a new version of GNU PSPP.
> > > PSPP is a program for statistical analysis of sampled data. It is a free
> > > replacement for the proprietary program SPSS.
> > >
> > > Here are the compressed sources and a GPG detached signature[*]:
> > >
https://ftp.gnu.org/gnu/pspp/pspp-1.6.0.tar.gz> > >
https://ftp.gnu.org/gnu/pspp/pspp-1.6.0.tar.gz.sig> > >
> > > Use a mirror for higher download bandwidth:
> > >
http://www.gnu.org/order/ftp.html> > >
> > > [*] Use a .sig file to verify that the corresponding file (without the .sig
> > > suffix) is intact. First, be sure to download both the .sig file and the
> > > corresponding tarball. Then, run a command like this:
> > >
> > > gpg --verify pspp-1.6.0.tar.gz.sig
> > >
> > > If that command fails because you don't have the required public key, then
> > > run this command to import it:
> > >
> > > gpg --keyserver
keys.gnupg.net --recv-keys 85199DE8C6648E90
> > >
> > > and rerun the 'gpg --verify' command.
> > >
> > > Changes from 1.4.1 to 1.6.0:
> > >
> > > * In the Kruskal-Wallis test, a misleading result could occur
> > > if the lower bound specified by the user was in fact higher
> > > than the upper bound specified. This has been fixed.
> > >
> > > * The DEFINE, MATRIX, MCONVERT, and MATRIX DATA commands are now
> > > implemented.
> > >
> > > * An error in the displayed signficance of oneway anova
> > > contrasts tests has been corrected.
> > >
> > > * Added Drag-N-Drop in output view.
> > >
> > > * The Explore GUI dialog supports the "Plots" subdialog. Boxplots, Q-Q
> > > Plots
> > > and Spreadlevel plots are now also available via the GUI.
> > >
> > > * The graphical user interface for importing spreadsheets has been
> > > improved.
> > > The new interface provides the user with a preview of the data to be
> > > imported
> > > and interactive methods to select the desired ranges.
> > >
> > > * The user manual, in its Info and HTML versions, now includes
> > > graphical output examples and screenshots.
> > >
> > > * New command SHOW SYSTEM to easily print system information useful
> > > in bug reports.
> > >
> > > * Build changes:
> > >
> > > - Perl is no longer required to build.
> > >
> > > - Build now requires Python 3.4 or later. (Building PSPP 1.4.0
> > > also required Python, but it wasn't properly documented at the
> > > time.)
> > >
> > > - The Cairo and Pango libraries are now required.
> > >
> > > - gettext 0.20 or later is now required.
> > >
> > > - gtksourceview 4.x is now supported (3.x also remains supported).
> > >
> > > * Output improvements:
> > >
> > > - New drivers for output to TeX source files and to PNG files.
> > >
> > > - Table output styles may now be set with the new option
> > > --table-look and the new SET TLOOK command.
> > >
> > > - New driver option "trim" to remove empty space from PDF,
> > > PostScript, SVG, and PNG output files.
> > >
> > > - The PDF output driver now adds an outline to allow PDF viewers to
> > > display
> > > as a "table of contents" for the file.
> > >
> > > - The HTML output driver has a new option "bare".
> > >
> > > * New features in pspp-output:
> > >
> > > - New --table-look and --nth-commands options.
> > >
> > > - New get-table-look and convert-table-look commands.
> > >
> > >
> > >
> > >
> >
>