[PATCH v3 1/6] hw/misc: zynq_slcr: Correctly compute output clocks in the reset exit phase

[Bin Meng]

As of today, when booting upstream U-Boot for Xilinx Zynq, the UART
does not receive anything. Debugging shows that the UART input clock
frequency is zero which prevents the UART from receiving anything as
per the logic in uart_receive().

>From zynq_slcr_reset_exit() comment, it intends to compute output
clocks according to ps_clk and registers. zynq_slcr_compute_clocks()
is called to accomplish the task, inside which device_is_in_reset()
is called to actually make the attempt in vain.

Rework reset_hold() and reset_exit() so that in the reset exit phase,
the logic can really compute output clocks in reset_exit().

With this change, upstream U-Boot boots properly again with:

$ qemu-system-arm -M xilinx-zynq-a9 -m 1G -display none -serial null -serial 
stdio \
    -device loader,file=u-boot-dtb.bin,addr=0x4000000,cpu-num=0

Fixes: 38867cb7ec90 ("hw/misc/zynq_slcr: add clock generation for uarts")
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
---

(no changes since v1)

 hw/misc/zynq_slcr.c | 31 ++++++++++++++++++-------------
 1 file changed, 18 insertions(+), 13 deletions(-)

diff --git a/hw/misc/zynq_slcr.c b/hw/misc/zynq_slcr.c
index 5086e6b7ed..8b70285961 100644
--- a/hw/misc/zynq_slcr.c
+++ b/hw/misc/zynq_slcr.c
@@ -269,6 +269,21 @@ static uint64_t zynq_slcr_compute_clock(const uint64_t 
periods[],
     zynq_slcr_compute_clock((plls), (state)->regs[reg], \
                             reg ## _ ## enable_field ## _SHIFT)
 
+static void zynq_slcr_compute_clocks_internal(ZynqSLCRState *s, uint64_t 
ps_clk)
+{
+    uint64_t io_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_IO_PLL_CTRL]);
+    uint64_t arm_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_ARM_PLL_CTRL]);
+    uint64_t ddr_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_DDR_PLL_CTRL]);
+
+    uint64_t uart_mux[4] = {io_pll, io_pll, arm_pll, ddr_pll};
+
+    /* compute uartX reference clocks */
+    clock_set(s->uart0_ref_clk,
+              ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT0));
+    clock_set(s->uart1_ref_clk,
+              ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT1));
+}
+
 /**
  * Compute and set the ouputs clocks periods.
  * But do not propagate them further. Connected clocks
@@ -283,17 +298,7 @@ static void zynq_slcr_compute_clocks(ZynqSLCRState *s)
         ps_clk = 0;
     }
 
-    uint64_t io_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_IO_PLL_CTRL]);
-    uint64_t arm_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_ARM_PLL_CTRL]);
-    uint64_t ddr_pll = zynq_slcr_compute_pll(ps_clk, s->regs[R_DDR_PLL_CTRL]);
-
-    uint64_t uart_mux[4] = {io_pll, io_pll, arm_pll, ddr_pll};
-
-    /* compute uartX reference clocks */
-    clock_set(s->uart0_ref_clk,
-              ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT0));
-    clock_set(s->uart1_ref_clk,
-              ZYNQ_COMPUTE_CLK(s, uart_mux, R_UART_CLK_CTRL, CLKACT1));
+    zynq_slcr_compute_clocks_internal(s, ps_clk);
 }
 
 /**
@@ -416,7 +421,7 @@ static void zynq_slcr_reset_hold(Object *obj)
     ZynqSLCRState *s = ZYNQ_SLCR(obj);
 
     /* will disable all output clocks */
-    zynq_slcr_compute_clocks(s);
+    zynq_slcr_compute_clocks_internal(s, 0);
     zynq_slcr_propagate_clocks(s);
 }
 
@@ -425,7 +430,7 @@ static void zynq_slcr_reset_exit(Object *obj)
     ZynqSLCRState *s = ZYNQ_SLCR(obj);
 
     /* will compute output clocks according to ps_clk and registers */
-    zynq_slcr_compute_clocks(s);
+    zynq_slcr_compute_clocks_internal(s, clock_get(s->ps_clk));
     zynq_slcr_propagate_clocks(s);
 }
 
-- 
2.25.1