[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 00/14] aspeed queue
From: |
Cédric Le Goater |
Subject: |
[PULL 00/14] aspeed queue |
Date: |
Fri, 3 Sep 2021 21:40:54 +0200 |
The following changes since commit 8880cc4362fde4ecdac0b2092318893118206fcf:
Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20210902'
into staging (2021-09-03 08:27:38 +0100)
are available in the Git repository at:
https://github.com/legoater/qemu/ tags/pull-aspeed-20210903
for you to fetch changes up to 907796622b2a6b945c87641d94e254ac898b96ae:
hw/arm/aspeed: Add Fuji machine type (2021-09-03 18:43:16 +0200)
----------------------------------------------------------------
Aspeed patches :
* MAC enablement fixes (Guenter)
* Watchdog and pca9552 fixes (Andrew)
* GPIO fixes (Joel)
* AST2600A3 SoC and DPS310 models (Joel)
* New Fuji BMC machine (Peter)
----------------------------------------------------------------
Andrew Jeffery (3):
watchdog: aspeed: Sanitize control register values
watchdog: aspeed: Fix sequential control writes
misc/pca9552: Fix LED status register indexing in pca955x_get_led()
Guenter Roeck (2):
hw: arm: aspeed: Enable eth0 interface for aspeed-ast2600-evb
hw: arm: aspeed: Enable mac0/1 instead of mac1/2 for g220a
Joel Stanley (6):
hw: aspeed_gpio: Simplify 1.8V defines
hw: aspeed_gpio: Clarify GPIO controller name
arm/aspeed: rainier: Add i2c eeproms and muxes
aspeed: Emulate the AST2600A3
hw/misc: Add Infineon DPS310 sensor model
arm/aspeed: Add DPS310 to Witherspoon and Rainier
Peter Delevoryas (3):
hw/arm/aspeed: Initialize AST2600 UART clock selection registers
hw/arm/aspeed: Allow machine to set UART default
hw/arm/aspeed: Add Fuji machine type
include/hw/arm/aspeed.h | 1 +
include/hw/arm/aspeed_soc.h | 1 +
include/hw/misc/aspeed_scu.h | 2 +
include/hw/watchdog/wdt_aspeed.h | 1 +
hw/arm/aspeed.c | 178 +++++++++++++++++++++++++++++--
hw/arm/aspeed_ast2600.c | 14 +--
hw/arm/aspeed_soc.c | 8 +-
hw/gpio/aspeed_gpio.c | 97 +++++++++--------
hw/misc/aspeed_scu.c | 40 +++++--
hw/misc/pca9552.c | 2 +-
hw/sensor/dps310.c | 225 +++++++++++++++++++++++++++++++++++++++
hw/watchdog/wdt_aspeed.c | 26 ++++-
hw/arm/Kconfig | 1 +
hw/sensor/Kconfig | 4 +
hw/sensor/meson.build | 1 +
15 files changed, 525 insertions(+), 76 deletions(-)
create mode 100644 hw/sensor/dps310.c
- [PULL 00/14] aspeed queue,
Cédric Le Goater <=
- [PULL 13/14] hw/arm/aspeed: Allow machine to set UART default, Cédric Le Goater, 2021/09/03
- [PULL 14/14] hw/arm/aspeed: Add Fuji machine type, Cédric Le Goater, 2021/09/03
- [PULL 02/14] hw: arm: aspeed: Enable mac0/1 instead of mac1/2 for g220a, Cédric Le Goater, 2021/09/03
- [PULL 12/14] hw/arm/aspeed: Initialize AST2600 UART clock selection registers, Cédric Le Goater, 2021/09/03
- [PULL 05/14] hw: aspeed_gpio: Simplify 1.8V defines, Cédric Le Goater, 2021/09/03
- [PULL 03/14] watchdog: aspeed: Sanitize control register values, Cédric Le Goater, 2021/09/03
- [PULL 09/14] aspeed: Emulate the AST2600A3, Cédric Le Goater, 2021/09/03
- [PULL 06/14] hw: aspeed_gpio: Clarify GPIO controller name, Cédric Le Goater, 2021/09/03
- [PULL 10/14] hw/misc: Add Infineon DPS310 sensor model, Cédric Le Goater, 2021/09/03