[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PULL 00/14] aspeed queue
From: |
Cédric Le Goater |
Subject: |
Re: [PULL 00/14] aspeed queue |
Date: |
Sat, 4 Sep 2021 07:33:17 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.11.0 |
On 9/3/21 10:41 PM, Philippe Mathieu-Daudé wrote:
> Hi Peter,
>
> On 9/3/21 9:40 PM, Cédric Le Goater wrote:
>> The following changes since commit 8880cc4362fde4ecdac0b2092318893118206fcf:
>>
>> Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20210902'
>> into staging (2021-09-03 08:27:38 +0100)
>>
>> are available in the Git repository at:
>>
>> https://github.com/legoater/qemu/ tags/pull-aspeed-20210903
>>
>> for you to fetch changes up to 907796622b2a6b945c87641d94e254ac898b96ae:
>>
>> hw/arm/aspeed: Add Fuji machine type (2021-09-03 18:43:16 +0200)
>>
>> ----------------------------------------------------------------
>> Aspeed patches :
>>
>> * MAC enablement fixes (Guenter)
>> * Watchdog and pca9552 fixes (Andrew)
>> * GPIO fixes (Joel)
>> * AST2600A3 SoC and DPS310 models (Joel)
>> * New Fuji BMC machine (Peter)
>>
>> ----------------------------------------------------------------
>
>> Peter Delevoryas (3):
>> hw/arm/aspeed: Initialize AST2600 UART clock selection registers
>> hw/arm/aspeed: Allow machine to set UART default
>> hw/arm/aspeed: Add Fuji machine type
>
> I have a pending question with the last patch, do you mind holding
> this PR until it is resolved with Cédric and the patch author please?
>
> Thanks,
>
> Phil.
>
I guess we can drop the following from the commit log :
git clone https://github.com/facebook/openbmc
cd openbmc
./sync_yocto.sh
source openbmc-init-build-env fuji build-fuji
bitbake fuji-image
dd if=/dev/zero of=/tmp/fuji.mtd bs=1M count=128
dd if=./tmp/deploy/images/fuji/flash-fuji of=/tmp/fuji.mtd \
bs=1k conv=notrunc
git clone --branch aspeed-next https://github.com/peterdelevoryas/qemu
cd qemu
./configure --target-list=arm-softmmu --disable-vnc
make -j $(nproc)
./build/arm-softmmu/qemu-system-arm \
-machine fuji-bmc \
-drive file=/tmp/fuji.mtd,format=raw,if=mtd \
-serial stdio \
-nic user,hostfwd=::2222-:22
sshpass -p 0penBmc ssh root@localhost -p 2222
Thanks,
C.
- [PULL 03/14] watchdog: aspeed: Sanitize control register values, (continued)
- [PULL 03/14] watchdog: aspeed: Sanitize control register values, Cédric Le Goater, 2021/09/03
- [PULL 09/14] aspeed: Emulate the AST2600A3, Cédric Le Goater, 2021/09/03
- [PULL 06/14] hw: aspeed_gpio: Clarify GPIO controller name, Cédric Le Goater, 2021/09/03
- [PULL 10/14] hw/misc: Add Infineon DPS310 sensor model, Cédric Le Goater, 2021/09/03
- [PULL 01/14] hw: arm: aspeed: Enable eth0 interface for aspeed-ast2600-evb, Cédric Le Goater, 2021/09/03
- [PULL 07/14] misc/pca9552: Fix LED status register indexing in pca955x_get_led(), Cédric Le Goater, 2021/09/03
- [PULL 08/14] arm/aspeed: rainier: Add i2c eeproms and muxes, Cédric Le Goater, 2021/09/03
- [PULL 04/14] watchdog: aspeed: Fix sequential control writes, Cédric Le Goater, 2021/09/03
- [PULL 11/14] arm/aspeed: Add DPS310 to Witherspoon and Rainier, Cédric Le Goater, 2021/09/03
- Re: [PULL 00/14] aspeed queue, Philippe Mathieu-Daudé, 2021/09/03
- Re: [PULL 00/14] aspeed queue,
Cédric Le Goater <=
[PULL 00/14] aspeed queue, Cédric Le Goater, 2021/09/13
- [PULL 04/14] watchdog: aspeed: Fix sequential control writes, Cédric Le Goater, 2021/09/13
- [PULL 13/14] hw/arm/aspeed: Allow machine to set UART default, Cédric Le Goater, 2021/09/13
- [PULL 07/14] misc/pca9552: Fix LED status register indexing in pca955x_get_led(), Cédric Le Goater, 2021/09/13
- [PULL 08/14] arm/aspeed: rainier: Add i2c eeproms and muxes, Cédric Le Goater, 2021/09/13
- [PULL 09/14] aspeed: Emulate the AST2600A3, Cédric Le Goater, 2021/09/13