[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v8 15/19] hvf: arm: Implement -cpu host
From: |
Alexander Graf |
Subject: |
Re: [PATCH v8 15/19] hvf: arm: Implement -cpu host |
Date: |
Sun, 12 Sep 2021 22:23:55 +0200 |
User-agent: |
Mozilla/5.0 (Macintosh; Intel Mac OS X 10.15; rv:78.0) Gecko/20100101 Thunderbird/78.14.0 |
On 15.06.21 12:56, Peter Maydell wrote:
> On Wed, 19 May 2021 at 21:23, Alexander Graf <agraf@csgraf.de> wrote:
>> Now that we have working system register sync, we push more target CPU
>> properties into the virtual machine. That might be useful in some
>> situations, but is not the typical case that users want.
>>
>> So let's add a -cpu host option that allows them to explicitly pass all
>> CPU capabilities of their host CPU into the guest.
>>
>> Signed-off-by: Alexander Graf <agraf@csgraf.de>
>> Acked-by: Roman Bolshakov <r.bolshakov@yadro.com>
>>
>> ---
>>
>> v6 -> v7:
>>
>> - Move function define to own header
>> - Do not propagate SVE features for HVF
>> - Remove stray whitespace change
>> - Verify that EL0 and EL1 do not allow AArch32 mode
>> - Only probe host CPU features once
>> +static void hvf_arm_get_host_cpu_features(ARMHostCPUFeatures *ahcf)
>> +{
>> + ARMISARegisters host_isar;
> Can you zero-initialize this (with "= { }"), please? That way we
> know we have zeroes in the aarch32 ID fields rather than random junk later...
>
>> + const struct isar_regs {
>> + int reg;
>> + uint64_t *val;
>> + } regs[] = {
>> + { HV_SYS_REG_ID_AA64PFR0_EL1, &host_isar.id_aa64pfr0 },
>> + { HV_SYS_REG_ID_AA64PFR1_EL1, &host_isar.id_aa64pfr1 },
>> + { HV_SYS_REG_ID_AA64DFR0_EL1, &host_isar.id_aa64dfr0 },
>> + { HV_SYS_REG_ID_AA64DFR1_EL1, &host_isar.id_aa64dfr1 },
>> + { HV_SYS_REG_ID_AA64ISAR0_EL1, &host_isar.id_aa64isar0 },
>> + { HV_SYS_REG_ID_AA64ISAR1_EL1, &host_isar.id_aa64isar1 },
>> + { HV_SYS_REG_ID_AA64MMFR0_EL1, &host_isar.id_aa64mmfr0 },
>> + { HV_SYS_REG_ID_AA64MMFR1_EL1, &host_isar.id_aa64mmfr1 },
>> + { HV_SYS_REG_ID_AA64MMFR2_EL1, &host_isar.id_aa64mmfr2 },
>> + };
>> + hv_vcpu_t fd;
>> + hv_vcpu_exit_t *exit;
>> + int i;
>> +
>> + ahcf->dtb_compatible = "arm,arm-v8";
>> + ahcf->features = (1ULL << ARM_FEATURE_V8) |
>> + (1ULL << ARM_FEATURE_NEON) |
>> + (1ULL << ARM_FEATURE_AARCH64) |
>> + (1ULL << ARM_FEATURE_PMU) |
>> + (1ULL << ARM_FEATURE_GENERIC_TIMER);
>> +
>> + /* We set up a small vcpu to extract host registers */
>> +
>> + assert_hvf_ok(hv_vcpu_create(&fd, &exit, NULL));
>> + for (i = 0; i < ARRAY_SIZE(regs); i++) {
>> + assert_hvf_ok(hv_vcpu_get_sys_reg(fd, regs[i].reg, regs[i].val));
>> + }
>> + assert_hvf_ok(hv_vcpu_get_sys_reg(fd, HV_SYS_REG_MIDR_EL1,
>> &ahcf->midr));
>> + assert_hvf_ok(hv_vcpu_destroy(fd));
>> +
>> + ahcf->isar = host_isar;
>> + ahcf->reset_sctlr = 0x00c50078;
> Why this value in particular? Could we just ask the scratch HVF CPU
> for the value of SCTLR_EL1 rather than hardcoding something?
The fresh scratch hvf CPU has 0 as SCTLR. But I'm happy to put an actual
M1 copy of it here.
>
>> +
>> + /* Make sure we don't advertise AArch32 support for EL0/EL1 */
>> + g_assert((host_isar.id_aa64pfr0 & 0xff) == 0x11);
> This shouldn't really be an assert, I think. error_report() something
> and return false, and then arm_cpu_realizefn() will fail, which should
> cause us to exit.
I don't follow. We're filling in the -cpu host CPU template here. There
is no error path anywhere we could take. Or are you suggesting we only
error on realize? I don't see any obvious way how we could tell the
realize function that we don't want to expose AArch32 support for -cpu host.
This is a case that on today's systems can't happen - M1 does not
support AArch32 anywhere. So that assert could only ever hit if you run
macOS on non-Apple hardware (in which case I doubt hvf works as
intended) or if a new Apple CPU starts supporting AArch32 (again, very
unlikely).
So overall, I think the assert here is not too bad :)
Alex
- Re: [PATCH v8 15/19] hvf: arm: Implement -cpu host,
Alexander Graf <=