[PATCH qemu.git 1/1] hw/arm/virt: make second UART available

[~axelheider]

From: Axel Heider <axel.heider@hensoldt.net>

The first UART always always exists. If the security extensions are
enabled, the second UART also always exists. Otherwise, it only exists
if a backend is configured explicitly via '-serial <backend>', where
'null' creates a dummy backend. This allows enabling the second UART
explicitly on demand and does not interfere with any existing setup
that just expect one (or two if security extensions are enabled)
UARTs.

Signed-off-by: Axel Heider <axel.heider@hensoldt.net>
---
 hw/arm/virt-acpi-build.c | 12 ++++-----
 hw/arm/virt.c            | 55 ++++++++++++++++++++++++++++++----------
 include/hw/arm/virt.h    |  4 +--
 3 files changed, 49 insertions(+), 22 deletions(-)

diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index 4156111d49..3e1852a1b9 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -482,14 +482,14 @@ build_spcr(GArray *table_data, BIOSLinker *linker, 
VirtMachineState *vms)
     build_append_int_noprefix(table_data, 0, 3); /* Reserved */
     /* Base Address */
     build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 8, 0, 1,
-                     vms->memmap[VIRT_UART].base);
+                     vms->memmap[VIRT_UART0].base);
     /* Interrupt Type */
     build_append_int_noprefix(table_data,
         (1 << 3) /* Bit[3] ARMH GIC interrupt */, 1);
     build_append_int_noprefix(table_data, 0, 1); /* IRQ */
     /* Global System Interrupt */
     build_append_int_noprefix(table_data,
-                              vms->irqmap[VIRT_UART] + ARM_SPI_BASE, 4);
+                              vms->irqmap[VIRT_UART0] + ARM_SPI_BASE, 4);
     build_append_int_noprefix(table_data, 3 /* 9600 */, 1); /* Baud Rate */
     build_append_int_noprefix(table_data, 0 /* No Parity */, 1); /* Parity */
     /* Stop Bits */
@@ -673,11 +673,11 @@ build_dbg2(GArray *table_data, BIOSLinker *linker, 
VirtMachineState *vms)
 
     /* BaseAddressRegister[] */
     build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 8, 0, 1,
-                     vms->memmap[VIRT_UART].base);
+                     vms->memmap[VIRT_UART0].base);
 
     /* AddressSize[] */
     build_append_int_noprefix(table_data,
-                              vms->memmap[VIRT_UART].size, 4);
+                              vms->memmap[VIRT_UART0].size, 4);
 
     /* NamespaceString[] */
     g_array_append_vals(table_data, name, namespace_length);
@@ -858,8 +858,8 @@ build_dsdt(GArray *table_data, BIOSLinker *linker, 
VirtMachineState *vms)
      */
     scope = aml_scope("\\_SB");
     acpi_dsdt_add_cpus(scope, vms);
-    acpi_dsdt_add_uart(scope, &memmap[VIRT_UART],
-                       (irqmap[VIRT_UART] + ARM_SPI_BASE));
+    acpi_dsdt_add_uart(scope, &memmap[VIRT_UART0],
+                       (irqmap[VIRT_UART0] + ARM_SPI_BASE));
     if (vmc->acpi_expose_flash) {
         acpi_dsdt_add_flash(scope, &memmap[VIRT_FLASH]);
     }
diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index b871350856..59959c75b0 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -143,11 +143,11 @@ static const MemMapEntry base_memmap[] = {
     [VIRT_GIC_ITS] =            { 0x08080000, 0x00020000 },
     /* This redistributor space allows up to 2*64kB*123 CPUs */
     [VIRT_GIC_REDIST] =         { 0x080A0000, 0x00F60000 },
-    [VIRT_UART] =               { 0x09000000, 0x00001000 },
+    [VIRT_UART0] =              { 0x09000000, 0x00001000 },
     [VIRT_RTC] =                { 0x09010000, 0x00001000 },
     [VIRT_FW_CFG] =             { 0x09020000, 0x00000018 },
     [VIRT_GPIO] =               { 0x09030000, 0x00001000 },
-    [VIRT_SECURE_UART] =        { 0x09040000, 0x00001000 },
+    [VIRT_UART1] =              { 0x09040000, 0x00001000 }, /* secure UART */
     [VIRT_SMMU] =               { 0x09050000, 0x00020000 },
     [VIRT_PCDIMM_ACPI] =        { 0x09070000, MEMORY_HOTPLUG_IO_LEN },
     [VIRT_ACPI_GED] =           { 0x09080000, ACPI_GED_EVT_SEL_LEN },
@@ -184,11 +184,11 @@ static MemMapEntry extended_memmap[] = {
 };
 
 static const int a15irqmap[] = {
-    [VIRT_UART] = 1,
+    [VIRT_UART0] = 1,
     [VIRT_RTC] = 2,
     [VIRT_PCIE] = 3, /* ... to 6 */
     [VIRT_GPIO] = 7,
-    [VIRT_SECURE_UART] = 8,
+    [VIRT_UART1] = 8,
     [VIRT_ACPI_GED] = 9,
     [VIRT_MMIO] = 16, /* ...to 16 + NUM_VIRTIO_TRANSPORTS - 1 */
     [VIRT_GIC_V2M] = 48, /* ...to 48 + NUM_GICV2M_SPIS - 1 */
@@ -843,6 +843,27 @@ static void create_uart(const VirtMachineState *vms, int 
uart,
                         MemoryRegion *mem, Chardev *chr)
 {
     char *nodename;
+    /*
+     * The first UART always always exists. If the security extensions are
+     * enabled, the second UART also always exists. Otherwise, it only exists
+     * if a backend is configured explicitly via '-serial <backend>', where
+     * 'null' creates a dummy backend. This allows enabling the second UART
+     * explicitly on demand and does not interfere with any existing setup that
+     * just expect one (or two if security extensions are enabled) UARTs.
+     */
+    switch(uart) {
+    case VIRT_UART0:
+        break;
+    case VIRT_UART1:
+        if (!vms->secure && !chr) {
+            return;
+        }
+        break;
+    default:
+        error_report("unsupported UART ID %d", uart);
+        exit(1);
+    }
+
     hwaddr base = vms->memmap[uart].base;
     hwaddr size = vms->memmap[uart].size;
     int irq = vms->irqmap[uart];
@@ -854,6 +875,7 @@ static void create_uart(const VirtMachineState *vms, int 
uart,
 
     qdev_prop_set_chr(dev, "chardev", chr);
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
+    /* if security extensions are enabled, 'mem' is 'secure_sysmem' for UART1 
*/
     memory_region_add_subregion(mem, base,
                                 sysbus_mmio_get_region(s, 0));
     sysbus_connect_irq(s, 0, qdev_get_gpio_in(vms->gic, irq));
@@ -873,15 +895,19 @@ static void create_uart(const VirtMachineState *vms, int 
uart,
     qemu_fdt_setprop(ms->fdt, nodename, "clock-names",
                          clocknames, sizeof(clocknames));
 
-    if (uart == VIRT_UART) {
+    switch(uart) {
+    case VIRT_UART0:
         qemu_fdt_setprop_string(ms->fdt, "/chosen", "stdout-path", nodename);
-    } else {
-        /* Mark as not usable by the normal world */
-        qemu_fdt_setprop_string(ms->fdt, nodename, "status", "disabled");
-        qemu_fdt_setprop_string(ms->fdt, nodename, "secure-status", "okay");
-
-        qemu_fdt_setprop_string(ms->fdt, "/secure-chosen", "stdout-path",
-                                nodename);
+        break;
+    case VIRT_UART1:
+        if (vms->secure) {
+            qemu_fdt_setprop_string(ms->fdt, nodename, "status", "disabled");
+            qemu_fdt_setprop_string(ms->fdt, nodename, "secure-status", 
"okay");
+            qemu_fdt_setprop_string(ms->fdt, "/secure-chosen", "stdout-path",
+                                    nodename);
+        }
+    default:
+        break;
     }
 
     g_free(nodename);
@@ -2222,11 +2248,12 @@ static void machvirt_init(MachineState *machine)
 
     fdt_add_pmu_nodes(vms);
 
-    create_uart(vms, VIRT_UART, sysmem, serial_hd(0));
+    create_uart(vms, VIRT_UART0, sysmem, serial_hd(0));
+    create_uart(vms, VIRT_UART1, vms->secure ? secure_sysmem : sysmem,
+                serial_hd(1));
 
     if (vms->secure) {
         create_secure_ram(vms, secure_sysmem, secure_tag_sysmem);
-        create_uart(vms, VIRT_SECURE_UART, secure_sysmem, serial_hd(1));
     }
 
     if (tag_sysmem) {
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index 6ec479ca2b..90563c132b 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -69,7 +69,7 @@ enum {
     VIRT_GIC_ITS,
     VIRT_GIC_REDIST,
     VIRT_SMMU,
-    VIRT_UART,
+    VIRT_UART0,
     VIRT_MMIO,
     VIRT_RTC,
     VIRT_FW_CFG,
@@ -79,7 +79,7 @@ enum {
     VIRT_PCIE_ECAM,
     VIRT_PLATFORM_BUS,
     VIRT_GPIO,
-    VIRT_SECURE_UART,
+    VIRT_UART1, /* secure UART if vms->secure */
     VIRT_SECURE_MEM,
     VIRT_SECURE_GPIO,
     VIRT_PCDIMM_ACPI,
-- 
2.34.5