[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v13 3/8] block: add block layer APIs resembling Linux ZonedBl
|
From: |
Stefan Hajnoczi |
|
Subject: |
Re: [PATCH v13 3/8] block: add block layer APIs resembling Linux ZonedBlockDevice ioctls |
|
Date: |
Tue, 29 Nov 2022 21:01:21 -0500 |
On Thu, 27 Oct 2022 at 11:46, Sam Li <faithilikerun@gmail.com> wrote:
>
> Add a new zoned_host_device BlockDriver. The zoned_host_device option
> accepts only zoned host block devices. By adding zone management
> operations in this new BlockDriver, users can use the new block
> layer APIs including Report Zone and four zone management operations
> (open, close, finish, reset, reset_all).
>
> Qemu-io uses the new APIs to perform zoned storage commands of the device:
> zone_report(zrp), zone_open(zo), zone_close(zc), zone_reset(zrs),
> zone_finish(zf).
>
> For example, to test zone_report, use following command:
> $ ./build/qemu-io --image-opts -n driver=zoned_host_device,
> filename=/dev/nullb0
> -c "zrp offset nr_zones"
>
> Signed-off-by: Sam Li <faithilikerun@gmail.com>
> Reviewed-by: Hannes Reinecke <hare@suse.de>
> ---
> block/block-backend.c | 147 +++++++++++++
> block/file-posix.c | 348 ++++++++++++++++++++++++++++++
> block/io.c | 41 ++++
> include/block/block-io.h | 7 +
> include/block/block_int-common.h | 21 ++
> include/block/raw-aio.h | 6 +-
> include/sysemu/block-backend-io.h | 18 ++
> meson.build | 4 +
> qapi/block-core.json | 8 +-
> qemu-io-cmds.c | 149 +++++++++++++
> 10 files changed, 746 insertions(+), 3 deletions(-)
>
> diff --git a/block/block-backend.c b/block/block-backend.c
> index aa4adf06ae..731f23e816 100644
> --- a/block/block-backend.c
> +++ b/block/block-backend.c
> @@ -1431,6 +1431,15 @@ typedef struct BlkRwCo {
> void *iobuf;
> int ret;
> BdrvRequestFlags flags;
> + union {
> + struct {
> + unsigned int *nr_zones;
> + BlockZoneDescriptor *zones;
> + } zone_report;
> + struct {
> + unsigned long op;
> + } zone_mgmt;
> + };
> } BlkRwCo;
>
> int blk_make_zero(BlockBackend *blk, BdrvRequestFlags flags)
> @@ -1775,6 +1784,144 @@ int coroutine_fn blk_co_flush(BlockBackend *blk)
> return ret;
> }
>
> +static void coroutine_fn blk_aio_zone_report_entry(void *opaque)
> +{
> + BlkAioEmAIOCB *acb = opaque;
> + BlkRwCo *rwco = &acb->rwco;
> +
> + rwco->ret = blk_co_zone_report(rwco->blk, rwco->offset,
> + rwco->zone_report.nr_zones,
> + rwco->zone_report.zones);
> + blk_aio_complete(acb);
> +}
> +
> +BlockAIOCB *blk_aio_zone_report(BlockBackend *blk, int64_t offset,
> + unsigned int *nr_zones,
> + BlockZoneDescriptor *zones,
> + BlockCompletionFunc *cb, void *opaque)
> +{
> + BlkAioEmAIOCB *acb;
> + Coroutine *co;
> + IO_CODE();
> +
> + blk_inc_in_flight(blk);
> + acb = blk_aio_get(&blk_aio_em_aiocb_info, blk, cb, opaque);
> + acb->rwco = (BlkRwCo) {
> + .blk = blk,
> + .offset = offset,
> + .ret = NOT_DONE,
> + .zone_report = {
> + .zones = zones,
> + .nr_zones = nr_zones,
> + },
> + };
> + acb->has_returned = false;
> +
> + co = qemu_coroutine_create(blk_aio_zone_report_entry, acb);
> + bdrv_coroutine_enter(blk_bs(blk), co);
> +
> + acb->has_returned = true;
> + if (acb->rwco.ret != NOT_DONE) {
> + replay_bh_schedule_oneshot_event(blk_get_aio_context(blk),
> + blk_aio_complete_bh, acb);
> + }
> +
> + return &acb->common;
> +}
> +
> +static void coroutine_fn blk_aio_zone_mgmt_entry(void *opaque)
> +{
> + BlkAioEmAIOCB *acb = opaque;
> + BlkRwCo *rwco = &acb->rwco;
> +
> + rwco->ret = blk_co_zone_mgmt(rwco->blk, rwco->zone_mgmt.op,
> + rwco->offset, acb->bytes);
> + blk_aio_complete(acb);
> +}
> +
> +BlockAIOCB *blk_aio_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
> + int64_t offset, int64_t len,
> + BlockCompletionFunc *cb, void *opaque) {
> + BlkAioEmAIOCB *acb;
> + Coroutine *co;
> + IO_CODE();
> +
> + blk_inc_in_flight(blk);
> + acb = blk_aio_get(&blk_aio_em_aiocb_info, blk, cb, opaque);
> + acb->rwco = (BlkRwCo) {
> + .blk = blk,
> + .offset = offset,
> + .ret = NOT_DONE,
> + .zone_mgmt = {
> + .op = op,
> + },
> + };
> + acb->bytes = len;
> + acb->has_returned = false;
> +
> + co = qemu_coroutine_create(blk_aio_zone_mgmt_entry, acb);
> + bdrv_coroutine_enter(blk_bs(blk), co);
> +
> + acb->has_returned = true;
> + if (acb->rwco.ret != NOT_DONE) {
> + replay_bh_schedule_oneshot_event(blk_get_aio_context(blk),
> + blk_aio_complete_bh, acb);
> + }
> +
> + return &acb->common;
> +}
> +
> +/*
> + * Send a zone_report command.
> + * offset is a byte offset from the start of the device. No alignment
> + * required for offset.
> + * nr_zones represents IN maximum and OUT actual.
> + */
> +int coroutine_fn blk_co_zone_report(BlockBackend *blk, int64_t offset,
> + unsigned int *nr_zones,
> + BlockZoneDescriptor *zones)
> +{
> + int ret;
> + IO_CODE();
> +
> + blk_inc_in_flight(blk); /* increase before waiting */
> + blk_wait_while_drained(blk);
> + if (!blk_is_available(blk)) {
> + blk_dec_in_flight(blk);
> + return -ENOMEDIUM;
> + }
> + ret = bdrv_co_zone_report(blk_bs(blk), offset, nr_zones, zones);
> + blk_dec_in_flight(blk);
> + return ret;
> +}
> +
> +/*
> + * Send a zone_management command.
> + * op is the zone operation;
> + * offset is the byte offset from the start of the zoned device;
> + * len is the maximum number of bytes the command should operate on. It
> + * should be aligned with the device zone size.
> + */
> +int coroutine_fn blk_co_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
> + int64_t offset, int64_t len)
> +{
> + int ret;
> + IO_CODE();
> +
> + blk_inc_in_flight(blk);
> + blk_wait_while_drained(blk);
> +
> + ret = blk_check_byte_request(blk, offset, len);
> + if (ret < 0) {
> + blk_dec_in_flight(blk);
> + return ret;
> + }
> +
> + ret = bdrv_co_zone_mgmt(blk_bs(blk), op, offset, len);
> + blk_dec_in_flight(blk);
> + return ret;
> +}
> +
> void blk_drain(BlockBackend *blk)
> {
> BlockDriverState *bs = blk_bs(blk);
> diff --git a/block/file-posix.c b/block/file-posix.c
> index 8cb07fdb8a..5f56526348 100644
> --- a/block/file-posix.c
> +++ b/block/file-posix.c
> @@ -67,6 +67,9 @@
> #include <sys/param.h>
> #include <sys/syscall.h>
> #include <sys/vfs.h>
> +#if defined(CONFIG_BLKZONED)
> +#include <linux/blkzoned.h>
> +#endif
> #include <linux/cdrom.h>
> #include <linux/fd.h>
> #include <linux/fs.h>
> @@ -215,6 +218,13 @@ typedef struct RawPosixAIOData {
> PreallocMode prealloc;
> Error **errp;
> } truncate;
> + struct {
> + unsigned int *nr_zones;
> + BlockZoneDescriptor *zones;
> + } zone_report;
> + struct {
> + unsigned long op;
> + } zone_mgmt;
> };
> } RawPosixAIOData;
>
> @@ -1350,6 +1360,50 @@ static void raw_refresh_limits(BlockDriverState *bs,
> Error **errp)
> zoned = BLK_Z_NONE;
> }
> bs->bl.zoned = zoned;
> + if (zoned != BLK_Z_NONE) {
> + /*
> + * The zoned device must at least have zone size and nr_zones fields.
> + */
> + ret = get_sysfs_long_val(&st, "chunk_sectors");
> + if (ret < 0) {
> + error_setg_errno(errp, -ret, "Unable to read chunk_sectors "
> + "sysfs attribute");
> + goto out;
> + } else if (!ret) {
> + error_setg(errp, "Read 0 from chunk_sectors sysfs attribute");
> + goto out;
> + }
> + bs->bl.zone_size = ret << BDRV_SECTOR_BITS;
> +
> + ret = get_sysfs_long_val(&st, "nr_zones");
> + if (ret < 0) {
> + error_setg_errno(errp, -ret, "Unable to read nr_zones "
> + "sysfs attribute");
> + goto out;
> + } else if (!ret) {
> + error_setg(errp, "Read 0 from nr_zones sysfs attribute");
> + goto out;
> + }
> + bs->bl.nr_zones = ret;
> +
> + ret = get_sysfs_long_val(&st, "zone_append_max_bytes");
> + if (ret > 0) {
> + bs->bl.max_append_sectors = ret >> BDRV_SECTOR_BITS;
> + }
> +
> + ret = get_sysfs_long_val(&st, "max_open_zones");
> + if (ret >= 0) {
> + bs->bl.max_open_zones = ret;
> + }
> +
> + ret = get_sysfs_long_val(&st, "max_active_zones");
> + if (ret >= 0) {
> + bs->bl.max_active_zones = ret;
> + }
> + return;
> + }
> +out:
> + bs->bl.zoned = BLK_Z_NONE;
> }
>
> static int check_for_dasd(int fd)
> @@ -1374,9 +1428,11 @@ static int hdev_probe_blocksizes(BlockDriverState *bs,
> BlockSizes *bsz)
> int ret;
>
> /* If DASD, get blocksizes */
> +#ifndef CONFIG_BLKZONED
> if (check_for_dasd(s->fd) < 0) {
> return -ENOTSUP;
> }
> +#endif
What is the purpose of this #ifndef? .bdrv_probe_blocksizes() should
only return block sizes for s390 DASD devices. I don't think zoned
storage needs block size probing here.
> ret = probe_logical_blocksize(s->fd, &bsz->log);
> if (ret < 0) {
> return ret;
> @@ -1844,6 +1900,146 @@ static off_t copy_file_range(int in_fd, off_t
> *in_off, int out_fd,
> }
> #endif
>
> +/*
> + * parse_zone - Fill a zone descriptor
> + */
> +#if defined(CONFIG_BLKZONED)
> +static inline int parse_zone(struct BlockZoneDescriptor *zone,
> + const struct blk_zone *blkz) {
> + zone->start = blkz->start << BDRV_SECTOR_BITS;
> + zone->length = blkz->len << BDRV_SECTOR_BITS;
> + zone->wp = blkz->wp << BDRV_SECTOR_BITS;
> +
> +#ifdef HAVE_BLK_ZONE_REP_CAPACITY
> + zone->cap = blkz->capacity << BDRV_SECTOR_BITS;
> +#else
> + zone->cap = blkz->len << BDRV_SECTOR_BITS;
> +#endif
> +
> + switch (blkz->type) {
> + case BLK_ZONE_TYPE_SEQWRITE_REQ:
> + zone->type = BLK_ZT_SWR;
> + break;
> + case BLK_ZONE_TYPE_SEQWRITE_PREF:
> + zone->type = BLK_ZT_SWP;
> + break;
> + case BLK_ZONE_TYPE_CONVENTIONAL:
> + zone->type = BLK_ZT_CONV;
> + break;
> + default:
> + error_report("Unsupported zone type: 0x%x", blkz->type);
> + return -ENOTSUP;
> + }
> +
> + switch (blkz->cond) {
> + case BLK_ZONE_COND_NOT_WP:
> + zone->state = BLK_ZS_NOT_WP;
> + break;
> + case BLK_ZONE_COND_EMPTY:
> + zone->state = BLK_ZS_EMPTY;
> + break;
> + case BLK_ZONE_COND_IMP_OPEN:
> + zone->state = BLK_ZS_IOPEN;
> + break;
> + case BLK_ZONE_COND_EXP_OPEN:
> + zone->state = BLK_ZS_EOPEN;
> + break;
> + case BLK_ZONE_COND_CLOSED:
> + zone->state = BLK_ZS_CLOSED;
> + break;
> + case BLK_ZONE_COND_READONLY:
> + zone->state = BLK_ZS_RDONLY;
> + break;
> + case BLK_ZONE_COND_FULL:
> + zone->state = BLK_ZS_FULL;
> + break;
> + case BLK_ZONE_COND_OFFLINE:
> + zone->state = BLK_ZS_OFFLINE;
> + break;
> + default:
> + error_report("Unsupported zone state: 0x%x", blkz->cond);
> + return -ENOTSUP;
> + }
> + return 0;
> +}
> +#endif
> +
> +#if defined(CONFIG_BLKZONED)
> +static int handle_aiocb_zone_report(void *opaque)
> +{
> + RawPosixAIOData *aiocb = opaque;
> + int fd = aiocb->aio_fildes;
> + unsigned int *nr_zones = aiocb->zone_report.nr_zones;
> + BlockZoneDescriptor *zones = aiocb->zone_report.zones;
> + /* zoned block devices use 512-byte sectors */
> + uint64_t sector = aiocb->aio_offset / 512;
> +
> + struct blk_zone *blkz;
> + size_t rep_size;
> + unsigned int nrz;
> + int ret, n = 0, i = 0;
> +
> + nrz = *nr_zones;
> + rep_size = sizeof(struct blk_zone_report) + nrz * sizeof(struct
> blk_zone);
> + g_autofree struct blk_zone_report *rep = NULL;
> + rep = g_malloc(rep_size);
> +
> + blkz = (struct blk_zone *)(rep + 1);
> + while (n < nrz) {
> + memset(rep, 0, rep_size);
> + rep->sector = sector;
> + rep->nr_zones = nrz - n;
> +
> + do {
> + ret = ioctl(fd, BLKREPORTZONE, rep);
> + } while (ret != 0 && errno == EINTR);
> + if (ret != 0) {
> + error_report("%d: ioctl BLKREPORTZONE at %" PRId64 " failed %d",
> + fd, sector, errno);
> + return -errno;
> + }
> +
> + if (!rep->nr_zones) {
> + break;
> + }
> +
> + for (i = 0; i < rep->nr_zones; i++, n++) {
> + ret = parse_zone(&zones[n], &blkz[i]);
> + if (ret != 0) {
> + return ret;
> + }
> +
> + /* The next report should start after the last zone reported */
> + sector = blkz[i].start + blkz[i].len;
> + }
> + }
> +
> + *nr_zones = n;
> + return 0;
> +}
> +#endif
> +
> +#if defined(CONFIG_BLKZONED)
> +static int handle_aiocb_zone_mgmt(void *opaque)
> +{
> + RawPosixAIOData *aiocb = opaque;
> + int fd = aiocb->aio_fildes;
> + uint64_t sector = aiocb->aio_offset / 512;
> + int64_t nr_sectors = aiocb->aio_nbytes / 512;
> + struct blk_zone_range range;
> + int ret;
> +
> + /* Execute the operation */
> + range.sector = sector;
> + range.nr_sectors = nr_sectors;
> + do {
> + ret = ioctl(fd, aiocb->zone_mgmt.op, &range);
> + } while (ret != 0 && errno == EINTR);
> +
> + return ret;
This should return a negative errno when an error has occurred:
if (ret < 0) {
return -errno;
}
return ret;
That way the caller (back in the thread that submitted this work item)
can get the errno value.
> +}
> +#endif
> +
> static int handle_aiocb_copy_range(void *opaque)
> {
> RawPosixAIOData *aiocb = opaque;
> @@ -3038,6 +3234,107 @@ static void raw_account_discard(BDRVRawState *s,
> uint64_t nbytes, int ret)
> }
> }
>
> +/*
> + * zone report - Get a zone block device's information in the form
> + * of an array of zone descriptors.
> + * zones is an array of zone descriptors to hold zone information on reply;
> + * offset can be any byte within the entire size of the device;
> + * nr_zones is the maxium number of sectors the command should operate on.
> + */
> +#if defined(CONFIG_BLKZONED)
> +static int coroutine_fn raw_co_zone_report(BlockDriverState *bs, int64_t
> offset,
> + unsigned int *nr_zones,
> + BlockZoneDescriptor *zones) {
> + BDRVRawState *s = bs->opaque;
> + RawPosixAIOData acb;
> +
> + acb = (RawPosixAIOData) {
> + .bs = bs,
> + .aio_fildes = s->fd,
> + .aio_type = QEMU_AIO_ZONE_REPORT,
> + .aio_offset = offset,
> + .zone_report = {
> + .nr_zones = nr_zones,
> + .zones = zones,
> + },
> + };
> +
> + return raw_thread_pool_submit(bs, handle_aiocb_zone_report, &acb);
> +}
> +#endif
> +
> +/*
> + * zone management operations - Execute an operation on a zone
> + */
> +#if defined(CONFIG_BLKZONED)
> +static int coroutine_fn raw_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp
> op,
> + int64_t offset, int64_t len) {
> + BDRVRawState *s = bs->opaque;
> + RawPosixAIOData acb;
> + int64_t zone_size, zone_size_mask;
> + const char *op_name;
> + unsigned long zo;
> + int ret;
> + int64_t capacity = bs->total_sectors << BDRV_SECTOR_BITS;
> +
> + zone_size = bs->bl.zone_size;
> + zone_size_mask = zone_size - 1;
> + if (offset & zone_size_mask) {
> + error_report("sector offset %" PRId64 " is not aligned to zone size "
> + "%" PRId64 "", offset / 512, zone_size / 512);
> + return -EINVAL;
> + }
> +
> + if (((offset + len) < capacity && len & zone_size_mask) ||
> + offset + len > capacity) {
> + error_report("number of sectors %" PRId64 " is not aligned to zone
> size"
> + " %" PRId64 "", len / 512, zone_size / 512);
> + return -EINVAL;
> + }
> +
> + switch (op) {
> + case BLK_ZO_OPEN:
> + op_name = "BLKOPENZONE";
> + zo = BLKOPENZONE;
> + break;
> + case BLK_ZO_CLOSE:
> + op_name = "BLKCLOSEZONE";
> + zo = BLKCLOSEZONE;
> + break;
> + case BLK_ZO_FINISH:
> + op_name = "BLKFINISHZONE";
> + zo = BLKFINISHZONE;
> + break;
> + case BLK_ZO_RESET:
> + op_name = "BLKRESETZONE";
> + zo = BLKRESETZONE;
> + break;
> + default:
> + error_report("Unsupported zone op: 0x%x", op);
> + return -ENOTSUP;
> + }
> +
> + acb = (RawPosixAIOData) {
> + .bs = bs,
> + .aio_fildes = s->fd,
> + .aio_type = QEMU_AIO_ZONE_MGMT,
> + .aio_offset = offset,
> + .aio_nbytes = len,
> + .zone_mgmt = {
> + .op = zo,
> + },
> + };
> +
> + ret = raw_thread_pool_submit(bs, handle_aiocb_zone_mgmt, &acb);
> + if (ret != 0) {
> + ret = -errno;
raw_thread_pool_submit() should return a negative errno, so there's no
need to do ret = -errno.
Also, the errno from handle_aiocb_zone_mgmt() isn't available to us
because we're running in a different thread. errno is thread-local
(each thread has its own errno value).
> + error_report("ioctl %s failed %d", op_name, ret);
> + }
> +
> + return ret;
> +}
> +#endif
> +
> static coroutine_fn int
> raw_do_pdiscard(BlockDriverState *bs, int64_t offset, int64_t bytes,
> bool blkdev)
> @@ -3768,6 +4065,54 @@ static BlockDriver bdrv_host_device = {
> #endif
> };
>
> +#if defined(CONFIG_BLKZONED)
> +static BlockDriver bdrv_zoned_host_device = {
> + .format_name = "zoned_host_device",
> + .protocol_name = "zoned_host_device",
> + .instance_size = sizeof(BDRVRawState),
> + .bdrv_needs_filename = true,
> + .bdrv_probe_device = hdev_probe_device,
> + .bdrv_file_open = hdev_open,
> + .bdrv_close = raw_close,
> + .bdrv_reopen_prepare = raw_reopen_prepare,
> + .bdrv_reopen_commit = raw_reopen_commit,
> + .bdrv_reopen_abort = raw_reopen_abort,
> + .bdrv_co_create_opts = bdrv_co_create_opts_simple,
> + .create_opts = &bdrv_create_opts_simple,
> + .mutable_opts = mutable_opts,
> + .bdrv_co_invalidate_cache = raw_co_invalidate_cache,
> + .bdrv_co_pwrite_zeroes = hdev_co_pwrite_zeroes,
> +
> + .bdrv_co_preadv = raw_co_preadv,
> + .bdrv_co_pwritev = raw_co_pwritev,
> + .bdrv_co_flush_to_disk = raw_co_flush_to_disk,
> + .bdrv_co_pdiscard = hdev_co_pdiscard,
> + .bdrv_co_copy_range_from = raw_co_copy_range_from,
> + .bdrv_co_copy_range_to = raw_co_copy_range_to,
> + .bdrv_refresh_limits = raw_refresh_limits,
> + .bdrv_io_plug = raw_aio_plug,
> + .bdrv_io_unplug = raw_aio_unplug,
> + .bdrv_attach_aio_context = raw_aio_attach_aio_context,
> +
> + .bdrv_co_truncate = raw_co_truncate,
> + .bdrv_getlength = raw_getlength,
> + .bdrv_get_info = raw_get_info,
> + .bdrv_get_allocated_file_size
> + = raw_get_allocated_file_size,
> + .bdrv_get_specific_stats = hdev_get_specific_stats,
> + .bdrv_check_perm = raw_check_perm,
> + .bdrv_set_perm = raw_set_perm,
> + .bdrv_abort_perm_update = raw_abort_perm_update,
> + .bdrv_probe_blocksizes = hdev_probe_blocksizes,
> + .bdrv_probe_geometry = hdev_probe_geometry,
> + .bdrv_co_ioctl = hdev_co_ioctl,
> +
> + /* zone management operations */
> + .bdrv_co_zone_report = raw_co_zone_report,
> + .bdrv_co_zone_mgmt = raw_co_zone_mgmt,
> +};
> +#endif
> +
> #if defined(__linux__) || defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
> static void cdrom_parse_filename(const char *filename, QDict *options,
> Error **errp)
> @@ -4028,6 +4373,9 @@ static void bdrv_file_init(void)
> bdrv_register(&bdrv_file);
> #if defined(HAVE_HOST_BLOCK_DEVICE)
> bdrv_register(&bdrv_host_device);
> +#if defined(CONFIG_BLKZONED)
> + bdrv_register(&bdrv_zoned_host_device);
> +#endif
> #ifdef __linux__
> bdrv_register(&bdrv_host_cdrom);
> #endif
> diff --git a/block/io.c b/block/io.c
> index d30073036e..88f707ea4d 100644
> --- a/block/io.c
> +++ b/block/io.c
> @@ -3189,6 +3189,47 @@ out:
> return co.ret;
> }
>
> +int coroutine_fn bdrv_co_zone_report(BlockDriverState *bs, int64_t offset,
> + unsigned int *nr_zones,
> + BlockZoneDescriptor *zones)
> +{
> + BlockDriver *drv = bs->drv;
> + CoroutineIOCompletion co = {
> + .coroutine = qemu_coroutine_self(),
> + };
> + IO_CODE();
> +
> + bdrv_inc_in_flight(bs);
> + if (!drv || !drv->bdrv_co_zone_report) {
> + co.ret = -ENOTSUP;
> + goto out;
> + }
> + co.ret = drv->bdrv_co_zone_report(bs, offset, nr_zones, zones);
> +out:
> + bdrv_dec_in_flight(bs);
> + return co.ret;
> +}
> +
> +int coroutine_fn bdrv_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op,
> + int64_t offset, int64_t len)
> +{
> + BlockDriver *drv = bs->drv;
> + CoroutineIOCompletion co = {
> + .coroutine = qemu_coroutine_self(),
> + };
> + IO_CODE();
> +
> + bdrv_inc_in_flight(bs);
> + if (!drv || !drv->bdrv_co_zone_mgmt) {
> + co.ret = -ENOTSUP;
> + goto out;
> + }
> + co.ret = drv->bdrv_co_zone_mgmt(bs, op, offset, len);
> +out:
> + bdrv_dec_in_flight(bs);
> + return co.ret;
> +}
> +
> void *qemu_blockalign(BlockDriverState *bs, size_t size)
> {
> IO_CODE();
> diff --git a/include/block/block-io.h b/include/block/block-io.h
> index 492f95fc05..f0cdf67d33 100644
> --- a/include/block/block-io.h
> +++ b/include/block/block-io.h
> @@ -88,6 +88,13 @@ int bdrv_co_ioctl(BlockDriverState *bs, int req, void
> *buf);
> /* Ensure contents are flushed to disk. */
> int coroutine_fn bdrv_co_flush(BlockDriverState *bs);
>
> +/* Report zone information of zone block device. */
> +int coroutine_fn bdrv_co_zone_report(BlockDriverState *bs, int64_t offset,
> + unsigned int *nr_zones,
> + BlockZoneDescriptor *zones);
> +int coroutine_fn bdrv_co_zone_mgmt(BlockDriverState *bs, BlockZoneOp op,
> + int64_t offset, int64_t len);
> +
> int bdrv_co_pdiscard(BdrvChild *child, int64_t offset, int64_t bytes);
> bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs);
> int bdrv_block_status(BlockDriverState *bs, int64_t offset,
> diff --git a/include/block/block_int-common.h
> b/include/block/block_int-common.h
> index 7f7863cc9e..c844ec3cf7 100644
> --- a/include/block/block_int-common.h
> +++ b/include/block/block_int-common.h
> @@ -691,6 +691,12 @@ struct BlockDriver {
> QEMUIOVector *qiov,
> int64_t pos);
>
> + int coroutine_fn (*bdrv_co_zone_report)(BlockDriverState *bs,
> + int64_t offset, unsigned int *nr_zones,
> + BlockZoneDescriptor *zones);
> + int coroutine_fn (*bdrv_co_zone_mgmt)(BlockDriverState *bs, BlockZoneOp
> op,
> + int64_t offset, int64_t len);
> +
> /* removable device specific */
> bool (*bdrv_is_inserted)(BlockDriverState *bs);
> void (*bdrv_eject)(BlockDriverState *bs, bool eject_flag);
> @@ -828,6 +834,21 @@ typedef struct BlockLimits {
>
> /* device zone model */
> BlockZoneModel zoned;
> +
> + /* zone size expressed in bytes */
> + uint32_t zone_size;
> +
> + /* total number of zones */
> + uint32_t nr_zones;
> +
> + /* maximum sectors of a zone append write operation */
> + int64_t max_append_sectors;
> +
> + /* maximum number of open zones */
> + int64_t max_open_zones;
> +
> + /* maximum number of active zones */
> + int64_t max_active_zones;
> } BlockLimits;
>
> typedef struct BdrvOpBlocker BdrvOpBlocker;
> diff --git a/include/block/raw-aio.h b/include/block/raw-aio.h
> index 21fc10c4c9..877b2240b3 100644
> --- a/include/block/raw-aio.h
> +++ b/include/block/raw-aio.h
> @@ -29,6 +29,8 @@
> #define QEMU_AIO_WRITE_ZEROES 0x0020
> #define QEMU_AIO_COPY_RANGE 0x0040
> #define QEMU_AIO_TRUNCATE 0x0080
> +#define QEMU_AIO_ZONE_REPORT 0x0100
> +#define QEMU_AIO_ZONE_MGMT 0x0200
> #define QEMU_AIO_TYPE_MASK \
> (QEMU_AIO_READ | \
> QEMU_AIO_WRITE | \
> @@ -37,7 +39,9 @@
> QEMU_AIO_DISCARD | \
> QEMU_AIO_WRITE_ZEROES | \
> QEMU_AIO_COPY_RANGE | \
> - QEMU_AIO_TRUNCATE)
> + QEMU_AIO_TRUNCATE | \
> + QEMU_AIO_ZONE_REPORT | \
> + QEMU_AIO_ZONE_MGMT)
>
> /* AIO flags */
> #define QEMU_AIO_MISALIGNED 0x1000
> diff --git a/include/sysemu/block-backend-io.h
> b/include/sysemu/block-backend-io.h
> index 50f5aa2e07..1b5fc7db6b 100644
> --- a/include/sysemu/block-backend-io.h
> +++ b/include/sysemu/block-backend-io.h
> @@ -45,6 +45,13 @@ BlockAIOCB *blk_aio_pwritev(BlockBackend *blk, int64_t
> offset,
> BlockCompletionFunc *cb, void *opaque);
> BlockAIOCB *blk_aio_flush(BlockBackend *blk,
> BlockCompletionFunc *cb, void *opaque);
> +BlockAIOCB *blk_aio_zone_report(BlockBackend *blk, int64_t offset,
> + unsigned int *nr_zones,
> + BlockZoneDescriptor *zones,
> + BlockCompletionFunc *cb, void *opaque);
> +BlockAIOCB *blk_aio_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
> + int64_t offset, int64_t len,
> + BlockCompletionFunc *cb, void *opaque);
> BlockAIOCB *blk_aio_pdiscard(BlockBackend *blk, int64_t offset, int64_t
> bytes,
> BlockCompletionFunc *cb, void *opaque);
> void blk_aio_cancel_async(BlockAIOCB *acb);
> @@ -156,6 +163,17 @@ int generated_co_wrapper blk_pwrite_zeroes(BlockBackend
> *blk, int64_t offset,
> int coroutine_fn blk_co_pwrite_zeroes(BlockBackend *blk, int64_t offset,
> int64_t bytes, BdrvRequestFlags flags);
>
> +int coroutine_fn blk_co_zone_report(BlockBackend *blk, int64_t offset,
> + unsigned int *nr_zones,
> + BlockZoneDescriptor *zones);
> +int generated_co_wrapper blk_zone_report(BlockBackend *blk, int64_t offset,
> + unsigned int *nr_zones,
> + BlockZoneDescriptor *zones);
> +int coroutine_fn blk_co_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
> + int64_t offset, int64_t len);
> +int generated_co_wrapper blk_zone_mgmt(BlockBackend *blk, BlockZoneOp op,
> + int64_t offset, int64_t len);
> +
> int generated_co_wrapper blk_pdiscard(BlockBackend *blk, int64_t offset,
> int64_t bytes);
> int coroutine_fn blk_co_pdiscard(BlockBackend *blk, int64_t offset,
> diff --git a/meson.build b/meson.build
> index 44c1f92697..0aa99b64a0 100644
> --- a/meson.build
> +++ b/meson.build
> @@ -1928,6 +1928,7 @@ config_host_data.set('CONFIG_REPLICATION',
> get_option('replication').allowed())
> # has_header
> config_host_data.set('CONFIG_EPOLL', cc.has_header('sys/epoll.h'))
> config_host_data.set('CONFIG_LINUX_MAGIC_H', cc.has_header('linux/magic.h'))
> +config_host_data.set('CONFIG_BLKZONED', cc.has_header('linux/blkzoned.h'))
> config_host_data.set('CONFIG_VALGRIND_H',
> cc.has_header('valgrind/valgrind.h'))
> config_host_data.set('HAVE_BTRFS_H', cc.has_header('linux/btrfs.h'))
> config_host_data.set('HAVE_DRM_H', cc.has_header('libdrm/drm.h'))
> @@ -2021,6 +2022,9 @@ config_host_data.set('HAVE_SIGEV_NOTIFY_THREAD_ID',
> config_host_data.set('HAVE_STRUCT_STAT_ST_ATIM',
> cc.has_member('struct stat', 'st_atim',
> prefix: '#include <sys/stat.h>'))
> +config_host_data.set('HAVE_BLK_ZONE_REP_CAPACITY',
> + cc.has_member('struct blk_zone', 'capacity',
> + prefix: '#include <linux/blkzoned.h>'))
>
> # has_type
> config_host_data.set('CONFIG_IOVEC',
> diff --git a/qapi/block-core.json b/qapi/block-core.json
> index 882b266532..05a3b44731 100644
> --- a/qapi/block-core.json
> +++ b/qapi/block-core.json
> @@ -2942,6 +2942,7 @@
> # @compress: Since 5.0
> # @copy-before-write: Since 6.2
> # @snapshot-access: Since 7.0
> +# @zoned_host_device: Since 7.2
> #
> # Since: 2.9
> ##
> @@ -2955,7 +2956,8 @@
> 'luks', 'nbd', 'nfs', 'null-aio', 'null-co', 'nvme', 'parallels',
> 'preallocate', 'qcow', 'qcow2', 'qed', 'quorum', 'raw', 'rbd',
> { 'name': 'replication', 'if': 'CONFIG_REPLICATION' },
> - 'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat' ] }
> + 'ssh', 'throttle', 'vdi', 'vhdx', 'vmdk', 'vpc', 'vvfat',
> + { 'name': 'zoned_host_device', 'if': 'CONFIG_BLKZONED' } ] }
>
> ##
> # @BlockdevOptionsFile:
> @@ -4329,7 +4331,9 @@
> 'vhdx': 'BlockdevOptionsGenericFormat',
> 'vmdk': 'BlockdevOptionsGenericCOWFormat',
> 'vpc': 'BlockdevOptionsGenericFormat',
> - 'vvfat': 'BlockdevOptionsVVFAT'
> + 'vvfat': 'BlockdevOptionsVVFAT',
> + 'zoned_host_device': { 'type': 'BlockdevOptionsFile',
> + 'if': 'CONFIG_BLKZONED' }
> } }
>
> ##
> diff --git a/qemu-io-cmds.c b/qemu-io-cmds.c
> index 952dc940f1..3a3bad77c3 100644
> --- a/qemu-io-cmds.c
> +++ b/qemu-io-cmds.c
> @@ -1712,6 +1712,150 @@ static const cmdinfo_t flush_cmd = {
> .oneline = "flush all in-core file state to disk",
> };
>
> +static inline int64_t tosector(int64_t bytes)
> +{
> + return bytes >> BDRV_SECTOR_BITS;
> +}
> +
> +static int zone_report_f(BlockBackend *blk, int argc, char **argv)
> +{
> + int ret;
> + int64_t offset;
> + unsigned int nr_zones;
> +
> + ++optind;
> + offset = cvtnum(argv[optind]);
> + ++optind;
> + nr_zones = cvtnum(argv[optind]);
> +
> + g_autofree BlockZoneDescriptor *zones = NULL;
> + zones = g_new(BlockZoneDescriptor, nr_zones);
> + ret = blk_zone_report(blk, offset, &nr_zones, zones);
> + if (ret < 0) {
> + printf("zone report failed: %s\n", strerror(-ret));
> + } else {
> + for (int i = 0; i < nr_zones; ++i) {
> + printf("start: 0x%" PRIx64 ", len 0x%" PRIx64 ", "
> + "cap"" 0x%" PRIx64 ", wptr 0x%" PRIx64 ", "
> + "zcond:%u, [type: %u]\n",
> + tosector(zones[i].start), tosector(zones[i].length),
> + tosector(zones[i].cap), tosector(zones[i].wp),
> + zones[i].state, zones[i].type);
> + }
> + }
> + return ret;
> +}
> +
> +static const cmdinfo_t zone_report_cmd = {
> + .name = "zone_report",
> + .altname = "zrp",
> + .cfunc = zone_report_f,
> + .argmin = 2,
> + .argmax = 2,
> + .args = "offset number",
> + .oneline = "report zone information",
> +};
> +
> +static int zone_open_f(BlockBackend *blk, int argc, char **argv)
> +{
> + int ret;
> + int64_t offset, len;
> + ++optind;
> + offset = cvtnum(argv[optind]);
> + ++optind;
> + len = cvtnum(argv[optind]);
> + ret = blk_zone_mgmt(blk, BLK_ZO_OPEN, offset, len);
> + if (ret < 0) {
> + printf("zone open failed: %s\n", strerror(-ret));
> + }
> + return ret;
> +}
> +
> +static const cmdinfo_t zone_open_cmd = {
> + .name = "zone_open",
> + .altname = "zo",
> + .cfunc = zone_open_f,
> + .argmin = 2,
> + .argmax = 2,
> + .args = "offset len",
> + .oneline = "explicit open a range of zones in zone block device",
> +};
> +
> +static int zone_close_f(BlockBackend *blk, int argc, char **argv)
> +{
> + int ret;
> + int64_t offset, len;
> + ++optind;
> + offset = cvtnum(argv[optind]);
> + ++optind;
> + len = cvtnum(argv[optind]);
> + ret = blk_zone_mgmt(blk, BLK_ZO_CLOSE, offset, len);
> + if (ret < 0) {
> + printf("zone close failed: %s\n", strerror(-ret));
> + }
> + return ret;
> +}
> +
> +static const cmdinfo_t zone_close_cmd = {
> + .name = "zone_close",
> + .altname = "zc",
> + .cfunc = zone_close_f,
> + .argmin = 2,
> + .argmax = 2,
> + .args = "offset len",
> + .oneline = "close a range of zones in zone block device",
> +};
> +
> +static int zone_finish_f(BlockBackend *blk, int argc, char **argv)
> +{
> + int ret;
> + int64_t offset, len;
> + ++optind;
> + offset = cvtnum(argv[optind]);
> + ++optind;
> + len = cvtnum(argv[optind]);
> + ret = blk_zone_mgmt(blk, BLK_ZO_FINISH, offset, len);
> + if (ret < 0) {
> + printf("zone finish failed: %s\n", strerror(-ret));
> + }
> + return ret;
> +}
> +
> +static const cmdinfo_t zone_finish_cmd = {
> + .name = "zone_finish",
> + .altname = "zf",
> + .cfunc = zone_finish_f,
> + .argmin = 2,
> + .argmax = 2,
> + .args = "offset len",
> + .oneline = "finish a range of zones in zone block device",
> +};
> +
> +static int zone_reset_f(BlockBackend *blk, int argc, char **argv)
> +{
> + int ret;
> + int64_t offset, len;
> + ++optind;
> + offset = cvtnum(argv[optind]);
> + ++optind;
> + len = cvtnum(argv[optind]);
> + ret = blk_zone_mgmt(blk, BLK_ZO_RESET, offset, len);
> + if (ret < 0) {
> + printf("zone reset failed: %s\n", strerror(-ret));
> + }
> + return ret;
> +}
> +
> +static const cmdinfo_t zone_reset_cmd = {
> + .name = "zone_reset",
> + .altname = "zrs",
> + .cfunc = zone_reset_f,
> + .argmin = 2,
> + .argmax = 2,
> + .args = "offset len",
> + .oneline = "reset a zone write pointer in zone block device",
> +};
> +
> static int truncate_f(BlockBackend *blk, int argc, char **argv);
> static const cmdinfo_t truncate_cmd = {
> .name = "truncate",
> @@ -2504,6 +2648,11 @@ static void __attribute((constructor))
> init_qemuio_commands(void)
> qemuio_add_command(&aio_write_cmd);
> qemuio_add_command(&aio_flush_cmd);
> qemuio_add_command(&flush_cmd);
> + qemuio_add_command(&zone_report_cmd);
> + qemuio_add_command(&zone_open_cmd);
> + qemuio_add_command(&zone_close_cmd);
> + qemuio_add_command(&zone_finish_cmd);
> + qemuio_add_command(&zone_reset_cmd);
> qemuio_add_command(&truncate_cmd);
> qemuio_add_command(&length_cmd);
> qemuio_add_command(&info_cmd);
> --
> 2.38.1
>
>
- Re: [PATCH v13 3/8] block: add block layer APIs resembling Linux ZonedBlockDevice ioctls,
Stefan Hajnoczi <=