[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-commits] [qemu/qemu] 7c4869: virtio-ccw: Check indicators location
From: |
GitHub |
Subject: |
[Qemu-commits] [qemu/qemu] 7c4869: virtio-ccw: Check indicators location. |
Date: |
Thu, 25 Apr 2013 13:30:11 -0700 |
Branch: refs/heads/master
Home: https://github.com/qemu/qemu
Commit: 7c4869761d7f2e0a3f806a5359eea5d2473ec5d5
https://github.com/qemu/qemu/commit/7c4869761d7f2e0a3f806a5359eea5d2473ec5d5
Author: Cornelia Huck <address@hidden>
Date: 2013-04-25 (Thu, 25 Apr 2013)
Changed paths:
M hw/s390x/virtio-ccw.c
Log Message:
-----------
virtio-ccw: Check indicators location.
If a guest neglected to register (secondary) indicators but still runs
with notifications enabled, we might end up writing to guest zero;
avoid this by checking for valid indicators and only writing to the
guest and generating an interrupt if indicators have been setup.
Cc: address@hidden
Signed-off-by: Cornelia Huck <address@hidden>
Commit: 95be0669a353d7f4093876a8fe94474e39c7af9d
https://github.com/qemu/qemu/commit/95be0669a353d7f4093876a8fe94474e39c7af9d
Author: Gerd Hoffmann <address@hidden>
Date: 2013-04-25 (Thu, 25 Apr 2013)
Changed paths:
M hw/display/xenfb.c
M include/ui/console.h
M ui/console.c
Log Message:
-----------
console: qom-ify QemuConsole
Just the minimal bits to turn QemuConsoles into Objects.
Signed-off-by: Gerd Hoffmann <address@hidden>
Commit: aa2beaa1f57ca329cfceece08cc19d52368e6a8f
https://github.com/qemu/qemu/commit/aa2beaa1f57ca329cfceece08cc19d52368e6a8f
Author: Gerd Hoffmann <address@hidden>
Date: 2013-04-25 (Thu, 25 Apr 2013)
Changed paths:
M hw/arm/musicpal.c
M hw/display/blizzard.c
M hw/display/cirrus_vga.c
M hw/display/exynos4210_fimd.c
M hw/display/g364fb.c
M hw/display/jazz_led.c
M hw/display/milkymist-vgafb.c
M hw/display/omap_lcdc.c
M hw/display/pl110.c
M hw/display/pxa2xx_lcd.c
M hw/display/qxl.c
M hw/display/sm501.c
M hw/display/ssd0303.c
M hw/display/ssd0323.c
M hw/display/tc6393xb.c
M hw/display/tcx.c
M hw/display/vga-isa-mm.c
M hw/display/vga-isa.c
M hw/display/vga-pci.c
M hw/display/vmware_vga.c
M hw/unicore32/puv3.c
M include/ui/console.h
M ui/console.c
Log Message:
-----------
console: add device link to QemuConsoles
So it is possible to figure which qemu console displays which device.
Signed-off-by: Gerd Hoffmann <address@hidden>
Commit: 14a936490bf90df32ab83d13563efe4b4c768c3c
https://github.com/qemu/qemu/commit/14a936490bf90df32ab83d13563efe4b4c768c3c
Author: Gerd Hoffmann <address@hidden>
Date: 2013-04-25 (Thu, 25 Apr 2013)
Changed paths:
M include/ui/console.h
M ui/console.c
Log Message:
-----------
console: add qemu_console_lookup_by_device
Look up the QemuConsole for a given device, using the new link.
Signed-off-by: Gerd Hoffmann <address@hidden>
Commit: cdd5b9375744130e2f49548a3cac7be176a931ca
https://github.com/qemu/qemu/commit/cdd5b9375744130e2f49548a3cac7be176a931ca
Author: Gerd Hoffmann <address@hidden>
Date: 2013-04-25 (Thu, 25 Apr 2013)
Changed paths:
M ui/console.c
Log Message:
-----------
console: switch ppm_save to qemu_open
... so it works with fdset.
Signed-off-by: Gerd Hoffmann <address@hidden>
Commit: 5209089fcd1373c363dc424827593ffaced12203
https://github.com/qemu/qemu/commit/5209089fcd1373c363dc424827593ffaced12203
Author: Gerd Hoffmann <address@hidden>
Date: 2013-04-25 (Thu, 25 Apr 2013)
Changed paths:
M hw/display/qxl.c
M include/ui/console.h
M ui/cocoa.m
M ui/console.c
M ui/curses.c
M ui/gtk.c
M ui/sdl.c
M ui/spice-display.c
M ui/vnc.c
Log Message:
-----------
console: zap ds arg from register_displaychangelistener
We don't have multiple DisplayStates any more,
so passing it in as argument is not needed.
Signed-off-by: Gerd Hoffmann <address@hidden>
Commit: d3002b0463727bf8110833b9d1a6efaa28990c28
https://github.com/qemu/qemu/commit/d3002b0463727bf8110833b9d1a6efaa28990c28
Author: Gerd Hoffmann <address@hidden>
Date: 2013-04-25 (Thu, 25 Apr 2013)
Changed paths:
M ui/console.c
Log Message:
-----------
console: add dummy surface for guests without graphic card
So users get a notification instead of a crash.
Signed-off-by: Gerd Hoffmann <address@hidden>
Commit: e4dcd8ace175a1a6bfb8945d8ae1906be051b36b
https://github.com/qemu/qemu/commit/e4dcd8ace175a1a6bfb8945d8ae1906be051b36b
Author: Ed Maste <address@hidden>
Date: 2013-04-25 (Thu, 25 Apr 2013)
Changed paths:
M include/qemu/timer.h
Log Message:
-----------
Remove unnecessary FreeBSD #include
sys/param.h was included to define __FreeBSD_version, but the conditional
using it was removed by commit d05ef160453e98546a4197496dc8a3cb2defac53
(Brad Smith, "Allow clock_gettime() monotonic clock to be utilized on more
OS's"), so the include is no longer needed here.
Signed-off-by: Ed Maste <address@hidden>
Reviewed-by: Peter Maydell <address@hidden>
Message-id: address@hidden
Signed-off-by: Anthony Liguori <address@hidden>
Commit: 79f2007578a0a205e25a6f299cc52d6732337089
https://github.com/qemu/qemu/commit/79f2007578a0a205e25a6f299cc52d6732337089
Author: Hans de Goede <address@hidden>
Date: 2013-04-25 (Thu, 25 Apr 2013)
Changed paths:
M qemu-char.c
Log Message:
-----------
qemu-char: Set foo_tag = 0 when returning FALSE from callbacks
While reviewing some patches I found this problem where tcp_chr_accept
does not clear listen_tag when returning FALSE, leading to a double
g_source_remove of the underlying source. Not really a problem unless the id
gets re-used in between, but still something we should fix.
While at it I've also reviewed all the other code in qemu-char.c for
similar problems and found that pty_chr_timer has the same problem.
Cc: Anthony Liguori <address@hidden>
Signed-off-by: Hans de Goede <address@hidden>
Message-id: address@hidden
Signed-off-by: Anthony Liguori <address@hidden>
Compare: https://github.com/qemu/qemu/compare/9953f8822cc3...79f2007578a0
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-commits] [qemu/qemu] 7c4869: virtio-ccw: Check indicators location.,
GitHub <=