qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v3 3/3] e1000: remove broken support for 82573L


From: Peter Crosthwaite
Subject: Re: [Qemu-devel] [PATCH v3 3/3] e1000: remove broken support for 82573L
Date: Sun, 1 Jun 2014 19:25:34 +1000

On Sun, Jun 1, 2014 at 1:33 PM, Gabriel L. Somlo <address@hidden> wrote:
> Currently, e1000 support is based on the manual for the 8254xx
> model series. 82573x models are documented in a separate manual
> (see 
> http://www.intel.com/content/dam/www/public/us/en/documents/manuals/pcie-gbe-controllers-open-source-manual.pdf)
> and the 82573L device ID no longer works correctly on either Linux
> (3.14.*) or Windows 7.
>
> This patch removes stale code claiming to support 82573L, cleaning
> up the code base for the remaining 8254xx model series.
>
> Signed-off-by: Gabriel Somlo <address@hidden>

Reviewed-by: Peter Crosthwaite <address@hidden>

> ---
>  hw/net/e1000.c     | 18 ------------------
>  tests/e1000-test.c |  1 -
>  2 files changed, 19 deletions(-)
>
> diff --git a/hw/net/e1000.c b/hw/net/e1000.c
> index 4e208e3..3ae5b43 100644
> --- a/hw/net/e1000.c
> +++ b/hw/net/e1000.c
> @@ -70,8 +70,6 @@ static int debugflags = DBGBIT(TXERR) | DBGBIT(GENERAL);
>  /*
>   * HW models:
>   *  E1000_DEV_ID_82540EM works with Windows, Linux, and OS X <= 10.8
> - *  E1000_DEV_ID_82573L OK with windoze and Linux 2.6.22,
> - *     appears to perform better than 82540EM, but breaks with Linux 2.6.18
>   *  E1000_DEV_ID_82544GC_COPPER appears to work; not well tested
>   *  E1000_DEV_ID_82545EM_COPPER works with Linux and OS X >= 10.6
>   *  Others never tested
> @@ -144,7 +142,6 @@ typedef struct E1000State_st {
>  typedef struct E1000DeviceClass {
>      PCIDeviceClass parent_class;
>      uint16_t phy_id2;
> -    bool is_8257xx;
>  } E1000DeviceClass;
>
>  #define TYPE_E1000_BASE "e1000-base"
> @@ -271,15 +268,9 @@ static void
>  set_interrupt_cause(E1000State *s, int index, uint32_t val)
>  {
>      PCIDevice *d = PCI_DEVICE(s);
> -    E1000DeviceClass *edc = E1000_DEVICE_GET_CLASS(d);
>      uint32_t pending_ints;
>      uint32_t mit_delay;
>
> -    if (val && edc->is_8257xx) {
> -        /* hack only for 8257xx models */
> -        val |= E1000_ICR_INT_ASSERTED;
> -    }
> -
>      s->mac_reg[ICR] = val;
>
>      /*
> @@ -1581,7 +1572,6 @@ typedef struct E1000Info_st {
>      uint16_t   device_id;
>      uint8_t    revision;
>      uint16_t   phy_id2;
> -    bool       is_8257xx;
>  } E1000Info;
>
>  static void e1000_class_init(ObjectClass *klass, void *data)
> @@ -1598,7 +1588,6 @@ static void e1000_class_init(ObjectClass *klass, void 
> *data)
>      k->device_id = info->device_id;
>      k->revision = info->revision;
>      e->phy_id2 = info->phy_id2;
> -    e->is_8257xx = info->is_8257xx;
>      k->class_id = PCI_CLASS_NETWORK_ETHERNET;
>      set_bit(DEVICE_CATEGORY_NETWORK, dc->categories);
>      dc->desc = "Intel Gigabit Ethernet";
> @@ -1634,13 +1623,6 @@ static const E1000Info e1000_devices[] = {
>          .revision  = 0x03,
>          .phy_id2   = E1000_PHY_ID2_8254xx_DEFAULT,
>      },
> -    {
> -        .name      = "e1000-82573l",
> -        .device_id = E1000_DEV_ID_82573L,
> -        .revision  = 0x03,
> -        .phy_id2   = E1000_PHY_ID2_82573x,
> -        .is_8257xx = true,
> -    },
>  };
>
>  static const TypeInfo e1000_default_info = {
> diff --git a/tests/e1000-test.c b/tests/e1000-test.c
> index 53c41f8..81f164d 100644
> --- a/tests/e1000-test.c
> +++ b/tests/e1000-test.c
> @@ -33,7 +33,6 @@ static const char *models[] = {
>      "e1000-82540em",
>      "e1000-82544gc",
>      "e1000-82545em",
> -    "e1000-82573l",
>  };
>
>  int main(int argc, char **argv)
> --
> 1.9.3
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]