[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v4 00/33] pc: ACPI memory hotplug
From: |
Igor Mammedov |
Subject: |
[Qemu-devel] [PATCH v4 00/33] pc: ACPI memory hotplug |
Date: |
Mon, 2 Jun 2014 15:24:56 +0200 |
NOTE to commiter:
* update precompiled ACPI hex files for iasl-less hosts
and ACPI tables test to match new ACPI tables.
What's new since v10:
* rename DimmDevice to PCDIMMDevice
* allow anonymous DIMMs
* fix error handling in hostmemory_backend_set_size()
* fix ACPI read callback for case when guest tries to read
addr/length from slot without a present DIMM
What's new since v9:
* drop usage of error_is_set()
* exit QEMU if it's started with memory hotplug but
compat machine doesn't support it
* rename cpu_hotplug_defs.h to pc-hotplug.h
* use subsection when migrating acpi memory hotplug state
* add property to PC_MACHINE for getting hotplug memory region size
What's new since v8:
* rebased on top of Marcel's QOMyfing machine work
depends on patch from qom-next:
"machine: Conversion of QEMUMachineInitArgs to MachineState"
* fixed QEMU abort if it's running in daemonized mode
* fixed leak in memdev backend
* introduced custom PCMachine
* DIMM devices are now bus-less and use bus-less hotplug method
* DIMMDevice: renamed property/field 'start' to 'addr'
* ACPI tables:
* avoid punching hotples in PCI CRS by placing
MEMORY_HOPTLUG_DEVICE on PCI0 bus
* incorporated most of comments/fixes from reviewers
What's new since v7:
* Per Andreas' suggestion dropped DIMMBus concept.
* Added hotplug binding for bus-less devices
* DIMM device is split to backend and frontend. Therefore following
command/options were added for supporting it:
For memory-ram backend:
CLI: -object-add memory-ram,
with options: 'id' and 'size'
For dimm frontend:
option "size" became readonly, pulling it's size from attached backend
added option "memdev" for specifying backend by 'id'
* dropped support for 32 bit guests
* failed hotplug action doesn't consume 1 slot anymore
* vaious fixes adressing reviewer's comments most of them in ACPI part
---
This series allows to hotplug 'arbitrary' DIMM devices specifying size,
NUMA node mapping (guest side), slot and address where to map it, at runtime.
Due to ACPI limitation there is need to specify a number of possible
DIMM devices. For this task -m option was extended to support
following format:
-m [mem=]RamSize[,slots=N,maxmem=M]
To allow memory hotplug user must specify a pair of additional parameters:
'slots' - number of possible increments
'maxmem' - max possible total memory size QEMU is allowed to use,
including RamSize.
minimal monitor command syntax to hotplug DIMM device:
object_add memory-ram,id=memX,size=1G
device_add pc-dimm,id=dimmX,memdev=memX
pc-dimm device provides following properties that could be used with
device_add / -device to alter default behavior:
id - unique string identifying device [mandatory]
slot - number in range [0-slots) [optional], if not specified
the first free slot is used
node - NUMA node id [optional] (default: 0)
size - amount of memory to add, readonly derived from backing memdev
addr - guest's physical address where to plug DIMM [optional],
if not specified the first gap in hotplug memory region
that fits DIMM is used
-device option could be used for adding potentially hotunplugable DIMMs
and also for specifying hotplugged DIMMs in migration case.
Tested guests:
- RHEL 6x64
- Windows 2012DCx64
- Windows 2008DCx64
Known limitations/bugs/TODOs:
- hot-remove is not supported, yet
- max number of supported DIMM devices 256 (due to ACPI object name
limit), could be increased creating several containers and putting
DIMMs there. (exercise for future)
- e820 table doesn't include DIMM devices added with -device /
(or after reboot devices added with device_add)
- Windows 2008 remembers DIMM configuration, so if DIMM with other
addr/size is added into the same slot, it refuses to use it insisting
on old mapping.
QEMU git tree for testing is available at:
https://github.com/imammedo/qemu/commits/memory-hotplug-v11
Example QEMU cmd line:
qemu-system-x86_64 -enable-kvm -monitor unix:/tmp/mon,server,nowait \
-m 4096,slots=4,maxmem=8G guest.img
PS:
Windows guest requires SRAT table for hotplug to work so add an extra option:
-numa node
Igor Mammedov (32):
pc: create custom generic PC machine type
pc: ACPI BIOS: use enum for defining memory affinity flags
object_add: allow completion handler to get canonical path
vl.c: daemonize before guest memory allocation
add memdev backend infrastructure
vl.c: extend -m option to support options for memory hotplug
qdev: hotplug for buss-less devices
qdev: expose DeviceState.hotplugged field as a property
memory: add memory_region_is_mapped() API
pc-dimm: do not allow to set already used memdev
pc: initialize memory hotplug address space
pc: exit QEMU if number of slots more than supported 256
pc: add 'etc/reserved-memory-end' fw_cfg interface for SeaBIOS
pc: exit QEMU if compat machine doesn't support memory hotlpug
pc: add memory hotplug handler to PC_MACHINE
pc-dimm: add busy address check and address auto-allocation
pc-dimm: add busy slot check and slot auto-allocation
acpi: rename cpu_hotplug_defs.h to pc-hotplug.h
acpi: memory hotplug ACPI hardware implementation
trace: add acpi memory hotplug IO region events
trace: pc: add PC_DIMM slot & address allocation
acpi:piix4: allow plug/unlug callbacks handle not only PCI devices
acpi:piix4: add memory hotplug handling
pc: ich9 lpc: make it work with global/compat properties
acpi:ich9: add memory hotplug handling
pc: migrate piix4 & ich9 MemHotplugState
pc: add acpi-device link to PCMachineState
pc: propagate memory hotplug event to ACPI device
pc: ACPI BIOS: implement memory hotplug interface
pc: add "hotplug-memory-region-size" property to PC_MACHINE
pc: ACPI BIOS: reserve SRAT entry for hotplug mem hole
pc: ACPI BIOS: make GPE.3 handle memory hotplug event on PIIX and Q35
machines
Vasilis Liaskovitis (1):
pc: implement pc-dimm device abstraction
backends/Makefile.objs | 2 +
backends/hostmem-ram.c | 54 ++++++++
backends/hostmem.c | 97 +++++++++++++++
default-configs/i386-softmmu.mak | 1 +
default-configs/x86_64-softmmu.mak | 1 +
docs/specs/acpi_mem_hotplug.txt | 44 +++++++
hw/Makefile.objs | 1 +
hw/acpi/Makefile.objs | 1 +
hw/acpi/ich9.c | 62 ++++++++++
hw/acpi/memory_hotplug.c | 187 ++++++++++++++++++++++++++++
hw/acpi/piix4.c | 74 ++++++++++--
hw/core/qdev.c | 30 +++++
hw/i386/Makefile.objs | 3 +-
hw/i386/acpi-build.c | 75 ++++++++++-
hw/i386/acpi-dsdt.dsl | 7 +-
hw/i386/pc.c | 227 ++++++++++++++++++++++++++++++++++-
hw/i386/pc_piix.c | 51 +++++---
hw/i386/pc_q35.c | 25 +++-
hw/i386/q35-acpi-dsdt.dsl | 7 +-
hw/i386/ssdt-mem.dsl | 77 ++++++++++++
hw/i386/ssdt-misc.dsl | 164 +++++++++++++++++++++++++
hw/isa/lpc_ich9.c | 33 +++++-
hw/mem/Makefile.objs | 1 +
hw/mem/pc-dimm.c | 236 ++++++++++++++++++++++++++++++++++++
hw/mips/mips_malta.c | 2 +-
include/exec/memory.h | 8 ++
include/hw/acpi/acpi.h | 6 +
include/hw/acpi/cpu_hotplug.h | 2 +-
include/hw/acpi/cpu_hotplug_defs.h | 32 -----
include/hw/acpi/ich9.h | 4 +
include/hw/acpi/memory_hotplug.h | 37 ++++++
include/hw/acpi/pc-hotplug.h | 56 +++++++++
include/hw/boards.h | 10 ++
include/hw/i386/pc.h | 64 ++++++++++-
include/hw/mem/pc-dimm.h | 79 ++++++++++++
include/sysemu/hostmem.h | 60 +++++++++
memory.c | 10 ++-
qemu-options.hx | 9 +-
qmp.c | 11 ++-
trace-events | 17 +++
vl.c | 64 +++++++++-
41 files changed, 1829 insertions(+), 102 deletions(-)
create mode 100644 backends/hostmem-ram.c
create mode 100644 backends/hostmem.c
create mode 100644 docs/specs/acpi_mem_hotplug.txt
create mode 100644 hw/acpi/memory_hotplug.c
create mode 100644 hw/i386/ssdt-mem.dsl
create mode 100644 hw/mem/Makefile.objs
create mode 100644 hw/mem/pc-dimm.c
delete mode 100644 include/hw/acpi/cpu_hotplug_defs.h
create mode 100644 include/hw/acpi/memory_hotplug.h
create mode 100644 include/hw/acpi/pc-hotplug.h
create mode 100644 include/hw/mem/pc-dimm.h
create mode 100644 include/sysemu/hostmem.h
- [Qemu-devel] [PATCH v4 00/33] pc: ACPI memory hotplug,
Igor Mammedov <=
- [Qemu-devel] [PATCH v4 02/33] pc: ACPI BIOS: use enum for defining memory affinity flags, Igor Mammedov, 2014/06/02
- [Qemu-devel] [PATCH v4 03/33] object_add: allow completion handler to get canonical path, Igor Mammedov, 2014/06/02
- [Qemu-devel] [PATCH v4 04/33] vl.c: daemonize before guest memory allocation, Igor Mammedov, 2014/06/02
- [Qemu-devel] [PATCH v4 01/33] pc: create custom generic PC machine type, Igor Mammedov, 2014/06/02
- [Qemu-devel] [PATCH v4 05/33] add memdev backend infrastructure, Igor Mammedov, 2014/06/02
- [Qemu-devel] [PATCH v4 07/33] qdev: hotplug for buss-less devices, Igor Mammedov, 2014/06/02
- [Qemu-devel] [PATCH v4 09/33] pc: implement pc-dimm device abstraction, Igor Mammedov, 2014/06/02