[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL 00/30] ppc-for-5.2 queue 20200904
From: |
David Gibson |
Subject: |
[PULL 00/30] ppc-for-5.2 queue 20200904 |
Date: |
Fri, 4 Sep 2020 13:46:49 +1000 |
The following changes since commit 67a7bfe560a1bba59efab085cb3430f45176d382:
Merge remote-tracking branch
'remotes/huth-gitlab/tags/pull-request-2020-09-03' into staging (2020-09-03
16:58:25 +0100)
are available in the Git repository at:
git://github.com/dgibson/qemu.git tags/ppc-for-5.2-20200904
for you to fetch changes up to b172606ecf29a140073f7787251a9d70ecb53b6e:
spapr_numa: move NVLink2 associativity handling to spapr_numa.c (2020-09-04
13:40:09 +1000)
----------------------------------------------------------------
ppc patch queue 2020-09-04
Next pull request for qemu-5.2. The biggest thing here is the
generalization of ARM's start-powered-off machine property to all
targets. This can fix a number of odd little edge cases where KVM
could run vcpus before they were properly initialized. This does
include changes to a number of files that aren't normally in my
purview. There are suitable Acked-by lines and Peter requested this
come in via my tree, since the most pressing requirement for it is in
pseries machines with the POWER secure virtual machine facility.
In addition we have:
* The start of Daniel Barboza's rework and clean up of pseries
machine NUMA handling
* Correction to behaviour of the nvdimm= generic machine property on
pseries
* An optimization to the allocation of XIVE interrupts on KVM
* Some fixes for confused behaviour with kernel_irqchip when both
XICS and XIVE are in play
* Add HIOMAP comamnd to pnv flash
* Properly advertise the fact that spapr_vscsi doesn't handle
hotplugged disks
* Some assorted minor enhancements
----------------------------------------------------------------
Cédric Le Goater (8):
ppc/pnv: Fix TypeInfo of PnvLpcController abstract class
spapr/xive: Add a 'hv-prio' property to represent the KVM escalation
priority
ppc/pnv: Add a HIOMAP erase command
spapr/xive: Use the xics flag to check for XIVE-only IRQ backends
spapr/xive: Modify kvm_cpu_is_enabled() interface
spapr/xive: Use kvmppc_xive_source_reset() in post_load
spapr/xive: Allocate IPIs independently from the other sources
spapr/xive: Allocate vCPU IPIs from the vCPU contexts
Daniel Henrique Barboza (10):
spapr_vscsi: do not allow device hotplug
ppc/spapr_nvdimm: use g_autofree in spapr_nvdimm_validate_opts()
spapr, spapr_nvdimm: fold NVDIMM validation in the same place
ppc/spapr_nvdimm: do not enable support with 'nvdimm=off'
ppc: introducing spapr_numa.c NUMA code helper
ppc/spapr_nvdimm: turn spapr_dt_nvdimm() static
spapr: introduce SpaprMachineState::numa_assoc_array
spapr, spapr_numa: handle vcpu ibm,associativity
spapr, spapr_numa: move lookup-arrays handling to spapr_numa.c
spapr_numa: move NVLink2 associativity handling to spapr_numa.c
David Gibson (2):
adb: Correct class size on TYPE_ADB_DEVICE
spapr: Remove unnecessary DRC type-checker macros
Philippe Mathieu-Daudé (2):
hw/ppc/ppc4xx_pci: Use ARRAY_SIZE() instead of magic value
hw/ppc/ppc4xx_pci: Replace pointless warning by assert()
Thiago Jung Bauermann (8):
target/arm: Move start-powered-off property to generic CPUState
target/arm: Move setting of CPU halted state to generic code
ppc/spapr: Use start-powered-off CPUState property
ppc/e500: Use start-powered-off CPUState property
mips/cps: Use start-powered-off CPUState property
sparc/sun4m: Don't set cs->halted = 0 in main_cpu_reset()
sparc/sun4m: Use start-powered-off CPUState property
target/s390x: Use start-powered-off CPUState property
exec.c | 1 +
hw/core/cpu.c | 2 +-
hw/input/adb.c | 1 +
hw/intc/spapr_xive.c | 33 ++++-----
hw/intc/spapr_xive_kvm.c | 102 +++++++++++++++++++++-----
hw/mips/cps.c | 15 +++-
hw/ppc/e500.c | 13 +++-
hw/ppc/meson.build | 3 +-
hw/ppc/pnv_bmc.c | 29 +++++++-
hw/ppc/pnv_lpc.c | 3 +-
hw/ppc/ppc4xx_pci.c | 8 +-
hw/ppc/spapr.c | 109 ++++++---------------------
hw/ppc/spapr_cpu_core.c | 10 +--
hw/ppc/spapr_irq.c | 2 +-
hw/ppc/spapr_numa.c | 167 ++++++++++++++++++++++++++++++++++++++++++
hw/ppc/spapr_nvdimm.c | 68 ++++++++++-------
hw/ppc/spapr_pci.c | 9 +--
hw/ppc/spapr_pci_nvlink2.c | 20 +----
hw/scsi/spapr_vscsi.c | 3 +
hw/sparc/sun4m.c | 26 ++-----
include/hw/core/cpu.h | 4 +
include/hw/ipmi/ipmi.h | 1 +
include/hw/ppc/spapr.h | 12 +++
include/hw/ppc/spapr_drc.h | 43 +----------
include/hw/ppc/spapr_numa.h | 35 +++++++++
include/hw/ppc/spapr_nvdimm.h | 7 +-
include/hw/ppc/spapr_xive.h | 2 +
target/arm/cpu.c | 4 +-
target/arm/cpu.h | 3 -
target/arm/kvm32.c | 2 +-
target/arm/kvm64.c | 2 +-
target/s390x/cpu.c | 2 +-
32 files changed, 468 insertions(+), 273 deletions(-)
create mode 100644 hw/ppc/spapr_numa.c
create mode 100644 include/hw/ppc/spapr_numa.h
- [PULL 00/30] ppc-for-5.2 queue 20200904,
David Gibson <=
- [PULL 04/30] spapr/xive: Add a 'hv-prio' property to represent the KVM escalation priority, David Gibson, 2020/09/03
- [PULL 01/30] adb: Correct class size on TYPE_ADB_DEVICE, David Gibson, 2020/09/03
- [PULL 02/30] ppc/pnv: Fix TypeInfo of PnvLpcController abstract class, David Gibson, 2020/09/03
- [PULL 03/30] spapr: Remove unnecessary DRC type-checker macros, David Gibson, 2020/09/03
- [PULL 06/30] spapr_vscsi: do not allow device hotplug, David Gibson, 2020/09/03
- [PULL 05/30] ppc/pnv: Add a HIOMAP erase command, David Gibson, 2020/09/03
- [PULL 08/30] spapr/xive: Modify kvm_cpu_is_enabled() interface, David Gibson, 2020/09/03
- [PULL 11/30] spapr/xive: Allocate vCPU IPIs from the vCPU contexts, David Gibson, 2020/09/03
- [PULL 07/30] spapr/xive: Use the xics flag to check for XIVE-only IRQ backends, David Gibson, 2020/09/03
- [PULL 09/30] spapr/xive: Use kvmppc_xive_source_reset() in post_load, David Gibson, 2020/09/03