qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH] riscv: sifive_test: Allow 16-bit writes to memory region


From: Michael Roth
Subject: Re: [PATCH] riscv: sifive_test: Allow 16-bit writes to memory region
Date: Mon, 14 Sep 2020 16:09:59 -0500
User-agent: alot/0.7

Quoting Alistair Francis (2020-09-14 11:07:26)
> On Fri, Sep 11, 2020 at 5:26 AM Michael Roth <mdroth@linux.vnet.ibm.com> 
> wrote:
> >
> > Quoting Alistair Francis (2020-09-10 13:10:43)
> > > On Thu, Sep 3, 2020 at 2:05 PM Michael Roth <mdroth@linux.vnet.ibm.com> 
> > > wrote:
> > > >
> > > > Quoting Alistair Francis (2020-09-01 18:59:29)
> > > > > On Mon, Aug 31, 2020 at 10:59 PM Nathan Chancellor
> > > > > <natechancellor@gmail.com> wrote:
> > > > > >
> > > > > > When shutting down the machine running a mainline Linux kernel, the
> > > > > > following error happens:
> > > > > >
> > > > > > $ build/riscv64-softmmu/qemu-system-riscv64 -bios default -M virt \
> > > > > >     -display none -initrd rootfs.cpio -kernel Image -m 512m \
> > > > > >     -nodefaults -serial mon:stdio
> > > > > > ...
> > > > > > Requesting system poweroff
> > > > > > [    4.999630] reboot: Power down
> > > > > > sbi_trap_error: hart0: trap handler failed (error -2)
> > > > > > sbi_trap_error: hart0: mcause=0x0000000000000007 
> > > > > > mtval=0x0000000000100000
> > > > > > sbi_trap_error: hart0: mepc=0x000000008000d4cc 
> > > > > > mstatus=0x0000000000001822
> > > > > > sbi_trap_error: hart0: ra=0x000000008000999e sp=0x0000000080015c78
> > > > > > sbi_trap_error: hart0: gp=0xffffffe000e76610 tp=0xffffffe0081b89c0
> > > > > > sbi_trap_error: hart0: s0=0x0000000080015c88 s1=0x0000000000000040
> > > > > > sbi_trap_error: hart0: a0=0x0000000000000000 a1=0x0000000080004024
> > > > > > sbi_trap_error: hart0: a2=0x0000000080004024 a3=0x0000000080004024
> > > > > > sbi_trap_error: hart0: a4=0x0000000000100000 a5=0x0000000000005555
> > > > > > sbi_trap_error: hart0: a6=0x0000000000004024 a7=0x0000000080011158
> > > > > > sbi_trap_error: hart0: s2=0x0000000000000000 s3=0x0000000080016000
> > > > > > sbi_trap_error: hart0: s4=0x0000000000000000 s5=0x0000000000000000
> > > > > > sbi_trap_error: hart0: s6=0x0000000000000001 s7=0x0000000000000000
> > > > > > sbi_trap_error: hart0: s8=0x0000000000000000 s9=0x0000000000000000
> > > > > > sbi_trap_error: hart0: s10=0x0000000000000000 s11=0x0000000000000008
> > > > > > sbi_trap_error: hart0: t0=0x0000000000000000 t1=0x0000000000000000
> > > > > > sbi_trap_error: hart0: t2=0x0000000000000000 t3=0x0000000000000000
> > > > > > sbi_trap_error: hart0: t4=0x0000000000000000 t5=0x0000000000000000
> > > > > > sbi_trap_error: hart0: t6=0x0000000000000000
> > > > > >
> > > > > > The kernel does a 16-bit write when powering off the machine, which
> > > > > > was allowed before commit 5d971f9e67 ("memory: Revert "memory: 
> > > > > > accept
> > > > > > mismatching sizes in memory_region_access_valid""). Make 
> > > > > > min_access_size
> > > > > > match reality so that the machine can shut down properly now.
> > > > > >
> > > > > > Cc: qemu-stable@nongnu.org
> > > > > > Fixes: 88a07990fa ("SiFive RISC-V Test Finisher")
> > > > > > Fixes: 5d971f9e67 ("memory: Revert "memory: accept mismatching 
> > > > > > sizes in memory_region_access_valid"")
> > > > > > Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
> > > > >
> > > > > Thanks!
> > > > >
> > > > > Applied to riscv-to-apply.next
> > > >
> > > > FYI, I'm hoping to pull this patch into the upcoming 5.0.1 stable
> > > > release. The freeze is scheduled for 2020-09-20, I will apply this if it
> > > > hits master before then.
> > >
> > > I just sent a PR with this patch. Is this still on track to make it into 
> > > 5.0.1?
> >
> > Since it's not likely to invalidate any testing on my end outside of the
> > ones built into QEMU I can probably still slip it in if it hits master
> > by Monday, or maybe just grab it from your tree.
> 
> This is in master now, I hope that's enough time to make it in.

Yes I pulled it in yesterday:

  https://github.com/mdroth/qemu/commits/stable-5.0-staging

> 
> Let me know if you want me to do anything else.

Thanks!

> 
> Alistair
> 
> >
> > >
> > > Alistair
> > >
> > > >
> > > > >
> > > > > Alistair
> > > > >
> > > > > > ---
> > > > > >
> > > > > > Please let me know if the tags are wrong or inappropriate, this is 
> > > > > > my
> > > > > > first QEMU patch.
> > > > > >
> > > > > >  hw/riscv/sifive_test.c | 2 +-
> > > > > >  1 file changed, 1 insertion(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/hw/riscv/sifive_test.c b/hw/riscv/sifive_test.c
> > > > > > index 0c78fb2c93..8c70dd69df 100644
> > > > > > --- a/hw/riscv/sifive_test.c
> > > > > > +++ b/hw/riscv/sifive_test.c
> > > > > > @@ -59,7 +59,7 @@ static const MemoryRegionOps sifive_test_ops = {
> > > > > >      .write = sifive_test_write,
> > > > > >      .endianness = DEVICE_NATIVE_ENDIAN,
> > > > > >      .valid = {
> > > > > > -        .min_access_size = 4,
> > > > > > +        .min_access_size = 2,
> > > > > >          .max_access_size = 4
> > > > > >      }
> > > > > >  };
> > > > > >
> > > > > > base-commit: 2f4c51c0f384d7888a04b4815861e6d5fd244d75
> > > > > > --
> > > > > > 2.28.0
> > > > > >
> > > > > >
> > > > >



reply via email to

[Prev in Thread] Current Thread [Next in Thread]