[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [RFC PATCH v2 4/4] hw/acpi/ich9: Enable ACPI PCI hot-plug
From: |
Julia Suvorova |
Subject: |
Re: [RFC PATCH v2 4/4] hw/acpi/ich9: Enable ACPI PCI hot-plug |
Date: |
Wed, 16 Sep 2020 21:28:34 +0200 |
On Fri, Aug 21, 2020 at 2:24 PM Igor Mammedov <imammedo@redhat.com> wrote:
>
> On Tue, 18 Aug 2020 23:52:27 +0200
> Julia Suvorova <jusual@redhat.com> wrote:
>
> > Add acpi_pcihp to ich9_pm and use ACPI PCI hot-plug by default.
>
> I don't see anything related to migrating hotplug state within series,
>
> see VMSTATE_PCI_HOTPLUG for example.
Ok, will do.
>
> > Signed-off-by: Julia Suvorova <jusual@redhat.com>
> > ---
> > Note: New pc_compats are usually added shortly after release.
> > I will switch to pc_compat_5_1 when it becomes available.
> >
> > hw/i386/acpi-build.h | 1 +
> > include/hw/acpi/ich9.h | 3 +++
> > hw/acpi/ich9.c | 45 ++++++++++++++++++++++++++++++++++++++++++
> > hw/acpi/pcihp.c | 5 ++++-
> > hw/i386/acpi-build.c | 2 +-
> > hw/i386/pc.c | 1 +
> > 6 files changed, 55 insertions(+), 2 deletions(-)
> >
> > diff --git a/hw/i386/acpi-build.h b/hw/i386/acpi-build.h
> > index 6f94312c39..f0bb080018 100644
> > --- a/hw/i386/acpi-build.h
> > +++ b/hw/i386/acpi-build.h
> > @@ -17,5 +17,6 @@ typedef enum {
> > } AcpiOSCField;
> >
> > void acpi_setup(void);
> > +Object *acpi_get_i386_pci_host(void);
> >
> > #endif
> > diff --git a/include/hw/acpi/ich9.h b/include/hw/acpi/ich9.h
> > index 28a53181cb..9947085e9c 100644
> > --- a/include/hw/acpi/ich9.h
> > +++ b/include/hw/acpi/ich9.h
> > @@ -24,6 +24,7 @@
> > #include "hw/acpi/acpi.h"
> > #include "hw/acpi/cpu_hotplug.h"
> > #include "hw/acpi/cpu.h"
> > +#include "hw/acpi/pcihp.h"
> > #include "hw/acpi/memory_hotplug.h"
> > #include "hw/acpi/acpi_dev_interface.h"
> > #include "hw/acpi/tco.h"
> > @@ -53,6 +54,8 @@ typedef struct ICH9LPCPMRegs {
> > AcpiCpuHotplug gpe_cpu;
> > CPUHotplugState cpuhp_state;
> >
> > + bool use_acpi_hotplug_bridge;
> > + AcpiPciHpState acpi_pci_hotplug;
> > MemHotplugState acpi_memory_hotplug;
> >
> > uint8_t disable_s3;
> > diff --git a/hw/acpi/ich9.c b/hw/acpi/ich9.c
> > index a2a1742aa6..fde86d12ae 100644
> > --- a/hw/acpi/ich9.c
> > +++ b/hw/acpi/ich9.c
> > @@ -265,6 +265,7 @@ static void pm_reset(void *opaque)
> > }
> > pm->smi_en_wmask = ~0;
> >
> > + acpi_pcihp_reset(&pm->acpi_pci_hotplug);
> > acpi_update_sci(&pm->acpi_regs, pm->irq);
> > }
> >
> > @@ -303,6 +304,17 @@ void ich9_pm_init(PCIDevice *lpc_pci, ICH9LPCPMRegs
> > *pm,
> > pm->enable_tco = true;
> > acpi_pm_tco_init(&pm->tco_regs, &pm->io);
> >
> > + if (pm->use_acpi_hotplug_bridge) {
> > + acpi_pcihp_init(OBJECT(lpc_pci),
> > + &pm->acpi_pci_hotplug,
> > + pci_get_bus(lpc_pci),
> > + pci_address_space_io(lpc_pci),
> > + true, false);
> > +
> > + qbus_set_hotplug_handler(BUS(pci_get_bus(lpc_pci)),
> > + OBJECT(lpc_pci));
> > + }
> > +
> > pm->irq = sci_irq;
> > qemu_register_reset(pm_reset, pm);
> > pm->powerdown_notifier.notify = pm_powerdown_req;
> > @@ -374,6 +386,20 @@ static void ich9_pm_set_enable_tco(Object *obj, bool
> > value, Error **errp)
> > s->pm.enable_tco = value;
> > }
> >
> > +static bool ich9_pm_get_acpi_pci_hotplug(Object *obj, Error **errp)
> > +{
> > + ICH9LPCState *s = ICH9_LPC_DEVICE(obj);
> > +
> > + return s->pm.use_acpi_hotplug_bridge;
> > +}
> > +
> > +static void ich9_pm_set_acpi_pci_hotplug(Object *obj, bool value,
> > + Error **errp)
> > +{
> > + ICH9LPCState *s = ICH9_LPC_DEVICE(obj);
> > +
> > + s->pm.use_acpi_hotplug_bridge = value;
> > +}
> > void ich9_pm_add_properties(Object *obj, ICH9LPCPMRegs *pm)
> > {
> > static const uint32_t gpe0_len = ICH9_PMIO_GPE0_LEN;
> > @@ -382,6 +408,7 @@ void ich9_pm_add_properties(Object *obj, ICH9LPCPMRegs
> > *pm)
> > pm->disable_s3 = 0;
> > pm->disable_s4 = 0;
> > pm->s4_val = 2;
> > + pm->use_acpi_hotplug_bridge = true;
>
> I'd prefer default to be false, and managment turn it on when creating
> config for Windows.
>
> i.e. if users need it, they should enable it explicitly so overhead it
> produces
> won't affect other configs.
>
> > object_property_add_uint32_ptr(obj, ACPI_PM_PROP_PM_IO_BASE,
> > &pm->pm_io_base, OBJ_PROP_FLAG_READ);
> > @@ -405,6 +432,9 @@ void ich9_pm_add_properties(Object *obj, ICH9LPCPMRegs
> > *pm)
> > object_property_add_bool(obj, ACPI_PM_PROP_TCO_ENABLED,
> > ich9_pm_get_enable_tco,
> > ich9_pm_set_enable_tco);
> > + object_property_add_bool(obj, "acpi-pci-hotplug-with-bridge-support",
> > + ich9_pm_get_acpi_pci_hotplug,
> > + ich9_pm_set_acpi_pci_hotplug);
> > }
> >
> > void ich9_pm_device_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState
> > *dev,
> > @@ -412,6 +442,11 @@ void ich9_pm_device_pre_plug_cb(HotplugHandler
> > *hotplug_dev, DeviceState *dev,
> > {
> > ICH9LPCState *lpc = ICH9_LPC_DEVICE(hotplug_dev);
> >
> > + if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
> > + acpi_pcihp_device_pre_plug_cb(hotplug_dev, dev, errp);
> > + return;
> > + }
> > +
> > if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM) &&
> > !lpc->pm.acpi_memory_hotplug.is_enabled)
> > error_setg(errp,
> > @@ -437,6 +472,9 @@ void ich9_pm_device_plug_cb(HotplugHandler
> > *hotplug_dev, DeviceState *dev,
> > } else {
> > acpi_cpu_plug_cb(hotplug_dev, &lpc->pm.cpuhp_state, dev, errp);
> > }
> > + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
> > + acpi_pcihp_device_plug_cb(hotplug_dev, &lpc->pm.acpi_pci_hotplug,
> > + dev, errp);
> > } else {
> > error_setg(errp, "acpi: device plug request for not supported
> > device"
> > " type: %s", object_get_typename(OBJECT(dev)));
> > @@ -457,6 +495,10 @@ void ich9_pm_device_unplug_request_cb(HotplugHandler
> > *hotplug_dev,
> > !lpc->pm.cpu_hotplug_legacy) {
> > acpi_cpu_unplug_request_cb(hotplug_dev, &lpc->pm.cpuhp_state,
> > dev, errp);
> > + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
> > + acpi_pcihp_device_unplug_request_cb(hotplug_dev,
> > + &lpc->pm.acpi_pci_hotplug,
> > + dev, errp);
> > } else {
> > error_setg(errp, "acpi: device unplug request for not supported
> > device"
> > " type: %s", object_get_typename(OBJECT(dev)));
> > @@ -474,6 +516,9 @@ void ich9_pm_device_unplug_cb(HotplugHandler
> > *hotplug_dev, DeviceState *dev,
> > } else if (object_dynamic_cast(OBJECT(dev), TYPE_CPU) &&
> > !lpc->pm.cpu_hotplug_legacy) {
> > acpi_cpu_unplug_cb(&lpc->pm.cpuhp_state, dev, errp);
> > + } else if (object_dynamic_cast(OBJECT(dev), TYPE_PCI_DEVICE)) {
> > + acpi_pcihp_device_unplug_cb(hotplug_dev, &lpc->pm.acpi_pci_hotplug,
> > + dev, errp);
> > } else {
> > error_setg(errp, "acpi: device unplug for not supported device"
> > " type: %s", object_get_typename(OBJECT(dev)));
> > diff --git a/hw/acpi/pcihp.c b/hw/acpi/pcihp.c
> > index 9a35ed6c83..46ebd1bb15 100644
> > --- a/hw/acpi/pcihp.c
> > +++ b/hw/acpi/pcihp.c
> > @@ -30,6 +30,8 @@
> > #include "hw/pci-host/i440fx.h"
> > #include "hw/pci/pci.h"
> > #include "hw/pci/pci_bridge.h"
> > +#include "hw/pci/pci_host.h"
> > +#include "hw/i386/acpi-build.h"
> > #include "hw/acpi/acpi.h"
> > #include "exec/address-spaces.h"
> > #include "hw/pci/pci_bus.h"
> > @@ -90,6 +92,7 @@ static void *acpi_set_bsel(PCIBus *bus, void *opaque)
> > static void acpi_set_pci_info(void)
> > {
> > static bool bsel_is_set;
> > + Object *host = acpi_get_i386_pci_host();
> > PCIBus *bus;
> > unsigned bsel_alloc = ACPI_PCIHP_BSEL_DEFAULT;
> >
> > @@ -98,7 +101,7 @@ static void acpi_set_pci_info(void)
> > }
> > bsel_is_set = true;
> >
> > - bus = find_i440fx(); /* TODO: Q35 support */
> > + bus = PCI_HOST_BRIDGE(host)->bus;
> > if (bus) {
> > /* Scan all PCI buses. Set property to enable acpi based hotplug.
> > */
> > pci_for_each_bus_depth_first(bus, acpi_set_bsel, NULL,
> > &bsel_alloc);
> > diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> > index c5f4802b8c..8cecdf722f 100644
> > --- a/hw/i386/acpi-build.c
> > +++ b/hw/i386/acpi-build.c
> > @@ -270,7 +270,7 @@ static void acpi_get_misc_info(AcpiMiscInfo *info)
> > * Because of the PXB hosts we cannot simply query TYPE_PCI_HOST_BRIDGE.
> > * On i386 arch we only have two pci hosts, so we can look only for them.
> > */
> > -static Object *acpi_get_i386_pci_host(void)
> > +Object *acpi_get_i386_pci_host(void)
> > {
> > PCIHostState *host;
> >
> > diff --git a/hw/i386/pc.c b/hw/i386/pc.c
> > index 47c5ca3e34..175e6911a1 100644
> > --- a/hw/i386/pc.c
> > +++ b/hw/i386/pc.c
> > @@ -98,6 +98,7 @@
> > #include "trace.h"
> >
> > GlobalProperty pc_compat_5_0[] = {
> > + { "ICH9-LPC", "acpi-pci-hotplug-with-bridge-support", "off" },
> > };
> > const size_t pc_compat_5_0_len = G_N_ELEMENTS(pc_compat_5_0);
> >
>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [RFC PATCH v2 4/4] hw/acpi/ich9: Enable ACPI PCI hot-plug,
Julia Suvorova <=