[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 00/14] raspi: add the bcm2835 cprman clock manager
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [PATCH 00/14] raspi: add the bcm2835 cprman clock manager |
Date: |
Fri, 25 Sep 2020 14:55:47 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.11.0 |
Cc'ing Paul/Niek/Havard.
On 9/25/20 12:17 PM, Luc Michel wrote:
> Hi,
>
> This series add the BCM2835 cprman clock manager peripheral to the
> Raspberry Pi machine.
>
> Patches 1-3 are preliminary changes, patches 4-12 are the actual
> implementation.
>
> The two last patches add a clock input to the PL011 and
> connect it to the cprman and are RFC.
>
> This series has been tested with Linux 5.4.61 (the current raspios
> version). It fixes the kernel Oops at boot time due to invalid UART
> clock value, and other warnings/errors here and there because of bad
> clocks or lack of cprman.
>
> Here is the clock tree as seen by Linux when booted in QEMU:
> (/sys/kernel/debug/clk/clk_summary with some columns removed)
>
> enable prepare
> clock count count rate
> -----------------------------------------------------
> otg 0 0 480000000
> osc 5 5 19200000
> gp2 1 1 32768
> tsens 0 0 1920000
> otp 0 0 4800000
> timer 0 0 1000002
> pllh 4 4 864000000
> pllh_pix_prediv 1 1 3375000
> pllh_pix 0 0 337500
> pllh_aux 1 1 216000000
> vec 0 0 108000000
> pllh_rcal_prediv 1 1 3375000
> pllh_rcal 0 0 337500
> plld 3 3 2000000024
> plld_dsi1 0 0 7812501
> plld_dsi0 0 0 7812501
> plld_per 3 3 500000006
> gp1 1 1 25000000
> uart 1 2 47999625
> plld_core 2 2 500000006
> sdram 0 0 166666668
> pllc 3 3 2400000000
> pllc_per 1 1 1200000000
> emmc 0 0 200000000
> pllc_core2 0 0 9375000
> pllc_core1 0 0 9375000
> pllc_core0 2 2 1200000000
> vpu 1 1 700000000
> aux_spi2 0 0 700000000
> aux_spi1 0 0 700000000
> aux_uart 0 0 700000000
> peri_image 0 0 700000000
> plla 2 2 2250000000
> plla_ccp2 0 0 8789063
> plla_dsi0 0 0 8789063
> plla_core 1 1 750000000
> h264 0 0 250000000
> isp 0 0 250000000
> dsi1p 0 0 0
> dsi0p 0 0 0
> dsi1e 0 0 0
> dsi0e 0 0 0
> cam1 0 0 0
> cam0 0 0 0
> dpi 0 0 0
> tec 0 0 0
> smi 0 0 0
> slim 0 0 0
> gp0 0 0 0
> dft 0 0 0
> aveo 0 0 0
> pcm 0 0 0
> pwm 0 0 0
> hsm 0 0 0
>
> It shows small differences with real hardware due other missing
> peripherals for which the driver turn the clock off (like tsens).
>
> Luc Michel (14):
> hw/core/clock: provide the VMSTATE_ARRAY_CLOCK macro
> hw/core/clock: trace clock values in Hz instead of ns
> hw/arm/raspi: fix cprman base address
> hw/arm/raspi: add a skeleton implementation of the cprman
> hw/misc/bcm2835_cprman: add a PLL skeleton implementation
> hw/misc/bcm2835_cprman: implement PLLs behaviour
> hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation
> hw/misc/bcm2835_cprman: implement PLL channels behaviour
> hw/misc/bcm2835_cprman: add a clock mux skeleton implementation
> hw/misc/bcm2835_cprman: implement clock mux behaviour
> hw/misc/bcm2835_cprman: add the DSI0HSCK multiplexer
> hw/misc/bcm2835_cprman: add sane reset values to the registers
> hw/char/pl011: add a clock input
> hw/arm/bcm2835_peripherals: connect the UART clock
>
> 14 files changed, 2118 insertions(+), 12 deletions(-)
ouch... o_O huge device...
Tested on top of my raspi branch with raspi[0123]:
Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
- [PATCH 10/14] hw/misc/bcm2835_cprman: implement clock mux behaviour, (continued)
- [PATCH 10/14] hw/misc/bcm2835_cprman: implement clock mux behaviour, Luc Michel, 2020/09/25
- [PATCH 07/14] hw/misc/bcm2835_cprman: add a PLL channel skeleton implementation, Luc Michel, 2020/09/25
- [PATCH 05/14] hw/misc/bcm2835_cprman: add a PLL skeleton implementation, Luc Michel, 2020/09/25
- [PATCH 03/14] hw/arm/raspi: fix cprman base address, Luc Michel, 2020/09/25
- [PATCH 12/14] hw/misc/bcm2835_cprman: add sane reset values to the registers, Luc Michel, 2020/09/25
- [RFC PATCH 13/14] hw/char/pl011: add a clock input, Luc Michel, 2020/09/25
- [RFC PATCH 14/14] hw/arm/bcm2835_peripherals: connect the UART clock, Luc Michel, 2020/09/25
- [PATCH 09/14] hw/misc/bcm2835_cprman: add a clock mux skeleton implementation, Luc Michel, 2020/09/25
- Re: [PATCH 00/14] raspi: add the bcm2835 cprman clock manager, no-reply, 2020/09/25
- Re: [PATCH 00/14] raspi: add the bcm2835 cprman clock manager,
Philippe Mathieu-Daudé <=