[Bug 1619991] Re: Concurrent VMs crash w/ GPU passthrough and multiple disks

[Launchpad Bug Tracker]

[Expired for QEMU because there has been no activity for 60 days.]

** Changed in: qemu
       Status: Incomplete => Expired

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1619991

Title:
  Concurrent VMs crash w/ GPU passthrough and multiple disks

Status in QEMU:
  Expired

Bug description:
  When running multiple VMs with GPU passthrugh, both VMs will crash
  unless all virtual disks are on the same physical volume as root,
  likely on all X58 chipset motherboards.  I've tested with 3.

  Expected Behavior:  No Crash
  Result:  Both VMs GPU drivers fail and the guest OS are unrecoverable, 
usually within seconds, though the degree of "fickleness" of it depends on the 
multidisk setup.
  Reproducibility:  100%

  Steps to reproduce:

  *  Install OS (In my case Debian Jessie/Proxmox), and update to latest
  *  Setup VMs
  *  Setup up GPU passthrough with 1 GPU per VM, and one for host, as per 
https://pve.proxmox.com/wiki/Pci_passthrough
  *  Setup up USB passthrough
  *  Launch both VM
  *  Observe "everything is working"
  *  Stop VMs
  *  Add a second disk to one of the VMs, which exists on a separate physical 
disk from Host OS /
  *  Observe both VMs crash when the virtual disk which exists on separate 
physical media is used (i.e. copy files to the disk)
  *  Stop VMs
  *  Remove new disk, and move Guest OS virtual root disk to separate physical 
media.
  *  Observe both VMs crash around the time GPU driver is loaded on one

  As I mentioned earlier, there is some degree of difference in how
  difficult it is to trigger a crash, depending on the multidisk setup.
  For instance, when / is ZFS, and the virtual disks exist on a separate
  ZFS raid-z volume, both VMs must be doing some relatively intensive HW
  3d acceleration in order to trigger the crash.

  Passing two GPU to one VM works fine all the time, and running either
  VM on its in general will not trigger a crash.

  There are many variables I have yet to test, such as using sata
  instead of virtio for the virtual disks, however unfortunately I do
  not have anything from std err or logs to indicate what the problem
  could be.

  kernel verion:  Linux test-ve 4.4.15-1-pve  (other versions >= 4.2.1 and <= 
4.7.? tested)
  qemu version:  2.6.0 pve-qemu-kvm_2.6-1
  motherboards tested:  rampage iii, ga-ex58-ud5, asus Psomething
  CPUs tested:  i7 920, X5670

  KVM invocation 1:

  /usr/bin/kvm \
  -id 101 \
  -chardev socket,id=qmp,path=/var/run/qemu-server/101.qmp,server,nowait \
  -mon chardev=qmp,mode=control \
  -pidfile /var/run/qemu-server/101.pid \
  -daemonize \
  -smbios type=1,uuid=450e337e-244c-429b-9aa8-afb7aee037e8 \
  -drive if=pflash,format=raw,readonly,file=/usr/share/kvm/OVMF-pure-efi.fd \
  -drive if=pflash,format=raw,file=/root/101-OVMF_VARS-pure-efi.fd \
  -name Madzia-PC \
  -smp 12,sockets=1,cores=12,maxcpus=12 \
  -nodefaults \
  -boot menu=on,strict=on,reboot-timeout=1000 \
  -vga none \
  -nographic \
  -no-hpet \
  -cpu 
host,hv_vendor_id=Nvidia43FIX,hv_spinlocks=0x1fff,hv_vapic,hv_time,hv_reset,hv_vpindex,hv_runtime,hv_relaxed,+kvm_pv_unhalt,+kvm_pv_eoi,kvm=off
 \
  -m 8192 \
  -object memory-backend-ram,id=ram-node0,size=8192M \
  -numa node,nodeid=0,cpus=0-11,memdev=ram-node0 \
  -k en-us -readconfig /usr/share/qemu-server/pve-q35.cfg \
  -device usb-tablet,id=tablet,bus=ehci.0,port=1 \
  -device vfio-pci,host=04:00.0,id=hostpci0,bus=ich9-pcie-port-1,addr=0x0 \
  -device vfio-pci,host=04:00.1,id=hostpci1,bus=ich9-pcie-port-2,addr=0x0 \
  -device usb-host,hostbus=1,hostport=6.1,id=usb0 \
  -device usb-host,hostbus=1,hostport=6.2.1,id=usb1 \
  -device usb-host,hostbus=1,hostport=6.2.2,id=usb2 \
  -device usb-host,hostbus=1,hostport=6.2.3,id=usb3 \
  -device usb-host,hostbus=1,hostport=6.2,id=usb4 \
  -device usb-host,hostbus=1,hostport=6.3,id=usb5 \
  -device usb-host,hostbus=1,hostport=6.4,id=usb6 \
  -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 \
  -iscsi initiator-name=iqn.1993-08.org.debian:01:3f3df5515b13 \
  -drive 
file=/dev/pve/vm-101-disk-1,if=none,id=drive-virtio0,cache=writeback,format=raw,aio=threads,detect-zeroes=on
 \
  -device 
virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100 \
  -netdev 
type=tap,id=net0,ifname=tap101i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on
 \
  -device 
virtio-net-pci,mac=4E:DD:47:D7:DF:C9,netdev=net0,bus=pci.0,addr=0x12,id=net0 \
  -rtc driftfix=slew,base=localtime \
  -machine type=q35 \
  -global kvm-pit.lost_tick_policy=discard

  KVM invocation 2:

  /usr/bin/kvm \
  -id 102 \
  -chardev socket,id=qmp,path=/var/run/qemu-server/102.qmp,server,nowait \
  -mon chardev=qmp,mode=control \
  -pidfile /var/run/qemu-server/102.pid \
  -daemonize \
  -smbios type=1,uuid=450e337e-244c-429b-9aa8-afb7aee037e8 \
  -drive if=pflash,format=raw,readonly,file=/usr/share/kvm/OVMF-pure-efi.fd \
  -drive if=pflash,format=raw,file=/root/102-OVMF_VARS-pure-efi.fd \
  -name Madzia-PC \
  -smp 12,sockets=1,cores=12,maxcpus=12 \
  -nodefaults \
  -boot menu=on,strict=on,reboot-timeout=1000 \
  -vga none \
  -nographic \
  -no-hpet \
  -cpu 
host,hv_vendor_id=Nvidia43FIX,hv_spinlocks=0x1fff,hv_vapic,hv_time,hv_reset,hv_vpindex,hv_runtime,hv_relaxed,+kvm_pv_unhalt,+kvm_pv_eoi,kvm=off
 \
  -m 512 \
  -object memory-backend-ram,id=ram-node0,size=512M \
  -numa node,nodeid=0,cpus=0-11,memdev=ram-node0 \
  -k en-us \
  -readconfig /usr/share/qemu-server/pve-q35.cfg \
  -device usb-tablet,id=tablet,bus=ehci.0,port=1 \
  -device vfio-pci,host=05:00.0,id=hostpci2,bus=ich9-pcie-port-3,addr=0x0 \
  -device vfio-pci,host=05:00.1,id=hostpci3,bus=ich9-pcie-port-4,addr=0x0 \
  -device usb-host,hostbus=2,hostport=2.1,id=usb0 \
  -device usb-host,hostbus=2,hostport=2.2,id=usb1 \
  -device usb-host,hostbus=2,hostport=2.3,id=usb2 \
  -device usb-host,hostbus=2,hostport=2.4,id=usb3 \
  -device usb-host,hostbus=2,hostport=2.5,id=usb4 \
  -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 \
  -iscsi initiator-name=iqn.1993-08.org.debian:01:3f3df5515b13 \
  -drive 
file=/dev/pve/vm-102-disk-1,if=none,id=drive-virtio0,cache=writeback,format=raw,aio=threads,detect-zeroes=on
 \
  -device 
virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100 \
  -netdev 
type=tap,id=net0,ifname=tap102i0,script=/var/lib/qemu-server/pve-bridge,downscript=/var/lib/qemu-server/pve-bridgedown,vhost=on
 \
  -device 
virtio-net-pci,mac=4E:DD:47:D7:DF:C9,netdev=net0,bus=pci.0,addr=0x12,id=net0 \
  -rtc driftfix=slew,base=localtime \
  -machine type=q35 \
  -global kvm-pit.lost_tick_policy=discard

  Please let me know what additional information may be helpful, or how
  I can be of any assistance.

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1619991/+subscriptions