[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v2 4/6] hw/arm: Add I2C sensors and EEPROM for GSJ machine
From: |
Hao Wu |
Subject: |
[PATCH v2 4/6] hw/arm: Add I2C sensors and EEPROM for GSJ machine |
Date: |
Thu, 28 Jan 2021 16:58:43 -0800 |
Add AT24 EEPROM and temperature sensors for GSJ machine.
Reviewed-by: Doug Evans<dje@google.com>
Reviewed-by: Tyrong Ting<kfting@nuvoton.com>
Signed-off-by: Hao Wu <wuhaotsh@google.com>
---
default-configs/devices/arm-softmmu.mak | 1 +
hw/arm/npcm7xx_boards.c | 27 +++++++++++++++++++++++++
2 files changed, 28 insertions(+)
diff --git a/default-configs/devices/arm-softmmu.mak
b/default-configs/devices/arm-softmmu.mak
index 0500156a0c..d9805dd539 100644
--- a/default-configs/devices/arm-softmmu.mak
+++ b/default-configs/devices/arm-softmmu.mak
@@ -7,6 +7,7 @@ CONFIG_ARM_V7M=y
# CONFIG_TEST_DEVICES=n
CONFIG_ARM_VIRT=y
+CONFIG_AT24C=y
CONFIG_CUBIEBOARD=y
CONFIG_EXYNOS4=y
CONFIG_HIGHBANK=y
diff --git a/hw/arm/npcm7xx_boards.c b/hw/arm/npcm7xx_boards.c
index 47a215bd01..2d757b4013 100644
--- a/hw/arm/npcm7xx_boards.c
+++ b/hw/arm/npcm7xx_boards.c
@@ -19,6 +19,7 @@
#include "exec/address-spaces.h"
#include "hw/arm/npcm7xx.h"
#include "hw/core/cpu.h"
+#include "hw/i2c/smbus_eeprom.h"
#include "hw/loader.h"
#include "hw/qdev-properties.h"
#include "qapi/error.h"
@@ -104,6 +105,17 @@ static I2CBus *npcm7xx_i2c_get_bus(NPCM7xxState *soc,
uint32_t num)
return I2C_BUS(qdev_get_child_bus(DEVICE(&soc->smbus[num]), "i2c-bus"));
}
+static void at24c_eeprom_init(NPCM7xxState *soc, int bus, uint8_t addr,
+ uint32_t rsize)
+{
+ I2CBus *i2c_bus = npcm7xx_i2c_get_bus(soc, bus);
+ I2CSlave *i2c_dev = i2c_slave_new("at24c-eeprom", addr);
+ DeviceState *dev = DEVICE(i2c_dev);
+
+ qdev_prop_set_uint32(dev, "rom-size", rsize);
+ i2c_slave_realize_and_unref(i2c_dev, i2c_bus, &error_abort);
+}
+
static void npcm750_evb_i2c_init(NPCM7xxState *soc)
{
/* lm75 temperature sensor on SVB, tmp105 is compatible */
@@ -116,6 +128,20 @@ static void npcm750_evb_i2c_init(NPCM7xxState *soc)
i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 6), "tmp105", 0x48);
}
+static void quanta_gsj_i2c_init(NPCM7xxState *soc)
+{
+ /* GSJ machine have 4 max31725 temperature sensors, tmp105 is compatible.
*/
+ i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 1), "tmp105", 0x5c);
+ i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 2), "tmp105", 0x5c);
+ i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 3), "tmp105", 0x5c);
+ i2c_slave_create_simple(npcm7xx_i2c_get_bus(soc, 4), "tmp105", 0x5c);
+
+ at24c_eeprom_init(soc, 9, 0x55, 8192);
+ at24c_eeprom_init(soc, 10, 0x55, 8192);
+
+ /* TODO: Add addtional i2c devices. */
+}
+
static void npcm750_evb_init(MachineState *machine)
{
NPCM7xxState *soc;
@@ -141,6 +167,7 @@ static void quanta_gsj_init(MachineState *machine)
npcm7xx_load_bootrom(machine, soc);
npcm7xx_connect_flash(&soc->fiu[0], 0, "mx25l25635e",
drive_get(IF_MTD, 0, 0));
+ quanta_gsj_i2c_init(soc);
npcm7xx_load_kernel(machine, soc);
}
--
2.30.0.365.g02bc693789-goog
- [PATCH v2 0/6] hw/i2c: Add NPCM7XX SMBus Device, Hao Wu, 2021/01/28
- [PATCH v2 3/6] hw/arm: Add I2C sensors for NPCM750 eval board, Hao Wu, 2021/01/28
- [PATCH v2 1/6] hw/arm: Remove GPIO from unimplemented NPCM7XX, Hao Wu, 2021/01/28
- [PATCH v2 2/6] hw/i2c: Implement NPCM7XX SMBus Module Single Mode, Hao Wu, 2021/01/28
- [PATCH v2 4/6] hw/arm: Add I2C sensors and EEPROM for GSJ machine,
Hao Wu <=
- [PATCH v2 5/6] hw/i2c: Add a QTest for NPCM7XX SMBus Device, Hao Wu, 2021/01/28
- [PATCH v2 6/6] hw/i2c: Implement NPCM7XX SMBus Module FIFO Mode, Hao Wu, 2021/01/28