[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [PATCH v5 2/4] hw/arm/smmuv3: Update implementation of CFGI commands
From: |
Li, Chunming |
Subject: |
RE: [PATCH v5 2/4] hw/arm/smmuv3: Update implementation of CFGI commands based on device SID |
Date: |
Wed, 1 Sep 2021 06:51:19 +0000 |
> -----Original Message-----
> From: Eric Auger [mailto:eric.auger@redhat.com]
> Sent: Tuesday, August 31, 2021 10:02 PM
> To: chunming; peter.maydell@linaro.org
> Cc: qemu-arm@nongnu.org; qemu-devel@nongnu.org; Wen, Jianxian; Liu,
> Renwei; Li, Chunming
> Subject: Re: [PATCH v5 2/4] hw/arm/smmuv3: Update implementation of
> CFGI commands based on device SID
>
> Hi Chunming
>
> On 8/25/21 10:08 AM, chunming wrote:
> > From: chunming <chunming.li@verisilicon.com>
> >
> > Replace "smmuv3_flush_config" with "g_hash_table_foreach_remove".
> this replacement may have a potential negative impact on the
> performance
> for PCIe support, which is the main use case: a unique
> g_hash_table_remove() is replaced by an iteration over all the config
> hash keys.
>
> I wonder if you couldn't just adapt smmu_iommu_mr() and it case this
> latter returns NULL for the current PCIe search, look up in the
> platform
> device list:
>
> peri_sdev_list?
I think there are 2 scenes:
1. PCIe devices share same SID with peripheral devices.
2. Multi peripheral devices share same SID.
If we search PCIe 1st then search peri_sdev_list, there are 2 problems:
1. The code is complex.
2. We may need to search peri_sdev_list multi times. It may has
performance impact.
The CFGI commands are only called when the SMMU device is removed.
So we think there is no big performance impact.
>
> Thanks
>
> Eric
>
>
>
> > "smmu_iommu_mr" function can't get MR according to SID for non
> PCI/PCIe devices.
> >
> > Signed-off-by: chunming <chunming.li@verisilicon.com>
> > ---
> > hw/arm/smmuv3.c | 35 ++++++++++------------------------
> -
> > include/hw/arm/smmu-common.h | 5 ++++-
> > 2 files changed, 14 insertions(+), 26 deletions(-)
> >
> > diff --git a/hw/arm/smmuv3.c b/hw/arm/smmuv3.c
> > index 11d7fe8423..9f3f13fb8e 100644
> > --- a/hw/arm/smmuv3.c
> > +++ b/hw/arm/smmuv3.c
> > @@ -613,14 +613,6 @@ static SMMUTransCfg
> *smmuv3_get_config(SMMUDevice *sdev, SMMUEventInfo *event)
> > return cfg;
> > }
> >
> > -static void smmuv3_flush_config(SMMUDevice *sdev)
> > -{
> > - SMMUv3State *s = sdev->smmu;
> > - SMMUState *bc = &s->smmu_state;
> > -
> > - trace_smmuv3_config_cache_inv(smmu_get_sid(sdev));
> > - g_hash_table_remove(bc->configs, sdev);
> > -}
> >
> > static IOMMUTLBEntry smmuv3_translate(IOMMUMemoryRegion *mr, hwaddr
> addr,
> > IOMMUAccessFlags flag, int
> iommu_idx)
> > @@ -964,22 +956,18 @@ static int smmuv3_cmdq_consume(SMMUv3State *s)
> > case SMMU_CMD_CFGI_STE:
> > {
> > uint32_t sid = CMD_SID(&cmd);
> > - IOMMUMemoryRegion *mr = smmu_iommu_mr(bs, sid);
> > - SMMUDevice *sdev;
> > + SMMUSIDRange sid_range;
> >
> > if (CMD_SSEC(&cmd)) {
> > cmd_error = SMMU_CERROR_ILL;
> > break;
> > }
> >
> > - if (!mr) {
> > - break;
> > - }
> > -
> > + sid_range.start = sid;
> > + sid_range.end = sid;
> > trace_smmuv3_cmdq_cfgi_ste(sid);
> > - sdev = container_of(mr, SMMUDevice, iommu);
> > - smmuv3_flush_config(sdev);
> > -
> > + g_hash_table_foreach_remove(bs->configs,
> smmuv3_invalidate_ste,
> > + &sid_range);
> > break;
> > }
> > case SMMU_CMD_CFGI_STE_RANGE: /* same as SMMU_CMD_CFGI_ALL
> */
> > @@ -1006,21 +994,18 @@ static int smmuv3_cmdq_consume(SMMUv3State *s)
> > case SMMU_CMD_CFGI_CD_ALL:
> > {
> > uint32_t sid = CMD_SID(&cmd);
> > - IOMMUMemoryRegion *mr = smmu_iommu_mr(bs, sid);
> > - SMMUDevice *sdev;
> > + SMMUSIDRange sid_range;
> >
> > if (CMD_SSEC(&cmd)) {
> > cmd_error = SMMU_CERROR_ILL;
> > break;
> > }
> >
> > - if (!mr) {
> > - break;
> > - }
> > -
> > + sid_range.start = sid;
> > + sid_range.end = sid;
> > trace_smmuv3_cmdq_cfgi_cd(sid);
> > - sdev = container_of(mr, SMMUDevice, iommu);
> > - smmuv3_flush_config(sdev);
> > + g_hash_table_foreach_remove(bs->configs,
> smmuv3_invalidate_ste,
> > + &sid_range);
> > break;
> > }
> > case SMMU_CMD_TLBI_NH_ASID:
> > diff --git a/include/hw/arm/smmu-common.h b/include/hw/arm/smmu-
> common.h
> > index 95cd12a4b5..d016455d80 100644
> > --- a/include/hw/arm/smmu-common.h
> > +++ b/include/hw/arm/smmu-common.h
> > @@ -159,7 +159,10 @@ int smmu_ptw(SMMUTransCfg *cfg, dma_addr_t iova,
> IOMMUAccessFlags perm,
> > */
> > SMMUTransTableInfo *select_tt(SMMUTransCfg *cfg, dma_addr_t iova);
> >
> > -/* Return the iommu mr associated to @sid, or NULL if none */
> > +/**
> > + * Return the iommu mr associated to @sid, or NULL if none
> > + * Only for PCI device, check smmu_find_peri_sdev for non PCI/PCIe
> device
> > + */
> > IOMMUMemoryRegion *smmu_iommu_mr(SMMUState *s, uint32_t sid);
> >
> > #define SMMU_IOTLB_MAX_SIZE 256
- RE: [PATCH v5 2/4] hw/arm/smmuv3: Update implementation of CFGI commands based on device SID,
Li, Chunming <=