Re: [PULL 00/14] aspeed queue

[Philippe Mathieu-Daudé]

On 9/4/21 7:33 AM, Cédric Le Goater wrote:
> On 9/3/21 10:41 PM, Philippe Mathieu-Daudé wrote:
>> Hi Peter,
>>
>> On 9/3/21 9:40 PM, Cédric Le Goater wrote:
>>> The following changes since commit 8880cc4362fde4ecdac0b2092318893118206fcf:
>>>
>>>   Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20210902' 
>>> into staging (2021-09-03 08:27:38 +0100)
>>>
>>> are available in the Git repository at:
>>>
>>>   https://github.com/legoater/qemu/ tags/pull-aspeed-20210903
>>>
>>> for you to fetch changes up to 907796622b2a6b945c87641d94e254ac898b96ae:
>>>
>>>   hw/arm/aspeed: Add Fuji machine type (2021-09-03 18:43:16 +0200)
>>>
>>> ----------------------------------------------------------------
>>> Aspeed patches :
>>>
>>> * MAC enablement fixes (Guenter)
>>> * Watchdog  and pca9552 fixes (Andrew)
>>> * GPIO fixes (Joel)
>>> * AST2600A3 SoC and DPS310 models (Joel)
>>> * New Fuji BMC machine (Peter)
>>>
>>> ----------------------------------------------------------------
>>
>>> Peter Delevoryas (3):
>>>       hw/arm/aspeed: Initialize AST2600 UART clock selection registers
>>>       hw/arm/aspeed: Allow machine to set UART default
>>>       hw/arm/aspeed: Add Fuji machine type
>>
>> I have a pending question with the last patch, do you mind holding
>> this PR until it is resolved with Cédric and the patch author please?
>>
>> Thanks,
>>
>> Phil.
>>
> 
> I guess we can drop the following from the commit log : 
> 
>       git clone https://github.com/facebook/openbmc
>       cd openbmc
>       ./sync_yocto.sh
>       source openbmc-init-build-env fuji build-fuji
>       bitbake fuji-image
>       dd if=/dev/zero of=/tmp/fuji.mtd bs=1M count=128
>       dd if=./tmp/deploy/images/fuji/flash-fuji of=/tmp/fuji.mtd \
>           bs=1k conv=notrunc
>       
>       git clone --branch aspeed-next https://github.com/peterdelevoryas/qemu
>       cd qemu
>       ./configure --target-list=arm-softmmu --disable-vnc
>       make -j $(nproc)
>       ./build/arm-softmmu/qemu-system-arm \
>           -machine fuji-bmc \
>           -drive file=/tmp/fuji.mtd,format=raw,if=mtd \
>           -serial stdio \
>           -nic user,hostfwd=::2222-:22
>       sshpass -p 0penBmc ssh root@localhost -p 2222

Sounds good. Eventually document that in docs/system/arm/aspeed.rst
in a follow up patch?

Regards,

Phil.