[RFC PATCH v1 3/3] docs: pcie: RCEC

[Mayuresh Chitale]

Update root bus section to include information on how to
enable PCIe RCEC for any given machine.

Signed-off-by: Mayuresh Chitale <mchitale@ventanamicro.com>
---
 docs/pcie.txt | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/docs/pcie.txt b/docs/pcie.txt
index 89e3502075..da5d7b676b 100644
--- a/docs/pcie.txt
+++ b/docs/pcie.txt
@@ -57,12 +57,14 @@ Place only the following kinds of devices directly on the 
Root Complex:
     (4) Extra Root Complexes (pxb-pcie), if multiple PCI Express Root Buses
         are needed.
 
+    (5) Root complex event collector (pcie-rcec).
+
    pcie.0 bus
-   ----------------------------------------------------------------------------
-        |                |                    |                  |
-   -----------   ------------------   -------------------   --------------
-   | PCI Dev |   | PCIe Root Port |   | PCIe-PCI Bridge |   |  pxb-pcie  |
-   -----------   ------------------   -------------------   --------------
+   
------------------------------------------------------------------------------------
+        |                |                    |                  |             
   |
+   -----------   ------------------   -------------------   --------------   
-------------
+   | PCI Dev |   | PCIe Root Port |   | PCIe-PCI Bridge |   |  pxb-pcie  |   | 
PCIe RCEC |
+   -----------   ------------------   -------------------   --------------   
-------------
 
 2.1.1 To plug a device into pcie.0 as a Root Complex Integrated Endpoint use:
           -device <dev>[,bus=pcie.0]
@@ -72,6 +74,10 @@ Place only the following kinds of devices directly on the 
Root Complex:
       connected to the pcie.1 bus:
           -device 
ioh3420,id=root_port1[,bus=pcie.1][,chassis=x][,slot=y][,addr=z]                
                     \
           -device pcie-pci-bridge,id=pcie_pci_bridge1,bus=pcie.1
+2.1.3 To plug a PCIe RCEC into pcie.0 use:
+          -device pcie-rcec
+      PCIe RCEC must always be the first device on the root bus, pcie.0. So 
any RCiEP
+      devices plugged into pcie.0 must appear after the rcec in the command 
line.
 
 
 2.2 PCI Express only hierarchy
-- 
2.17.1