Re: [PATCH 1/1] hw: aspeed_gpio: Fix pin I/O type declarations

[Peter Delevoryas]

> On Sep 28, 2021, at 3:53 AM, Damien Hedde <damien.hedde@greensocs.com> wrote:
> 
> 
> 
> On 9/28/21 05:24, pdel@fb.com wrote:
>> From: Peter Delevoryas <pdel@fb.com>
>> Some of the pin declarations in the Aspeed GPIO module were incorrect,
>> probably because of confusion over which bits in the input and output
>> uint32_t's correspond to which groups in the label array. Since the
>> uint32_t literals are in big endian, it's sort of the opposite of what
>> would be intuitive. The least significant bit in ast2500_set_props[6]
>> corresponds to GPIOY0, not GPIOAB7.
>> GPIOxx indicates input and output capabilities, GPIxx indicates only
>> input, GPOxx indicates only output.
>> AST2500:
>> - Previously had GPIW0..GPIW7 and GPIX0..GPIX7, that's correct.
>> - Previously had GPIOY0..GPIOY3, should have been GPIOY0..GPIOY7.
>> - Previously had GPIOAB0..GPIOAB3 and GPIAB4..GPIAB7, should only have
>>   been GPIOAB0..GPIOAB3.
>> AST2600:
>> - GPIOT0..GPIOT7 should have been GPIT0..GPIT7.
>> - GPIOU0..GPIOU7 should have been GPIU0..GPIU7.
>> - GPIW0..GPIW7 should have been GPIOW0..GPIOW7.
>> - GPIOY0..GPIOY7 and GPIOZ0...GPIOZ7 were disabled.
>> Fixes: 4b7f956862dc2db4c5c ("hw/gpio: Add basic Aspeed GPIO model for 
>> AST2400 and AST2500")
>> Fixes: 36d737ee82b2972167e ("hw/gpio: Add in AST2600 specific 
>> implementation")
>> Signed-off-by: Peter Delevoryas <pdel@fb.com>
> 
> Reviewed-by: Damien Hedde <damien.hedde@greensocs.com>

cc’ing Dan

> 
>> ---
>>  hw/gpio/aspeed_gpio.c | 8 ++++----
>>  1 file changed, 4 insertions(+), 4 deletions(-)
>> diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c
>> index dfa6d6cb40..33a40a624a 100644
>> --- a/hw/gpio/aspeed_gpio.c
>> +++ b/hw/gpio/aspeed_gpio.c
>> @@ -796,7 +796,7 @@ static const GPIOSetProperties ast2500_set_props[] = {
>>      [3] = {0xffffffff,  0xffffffff,  {"M", "N", "O", "P"} },
>>      [4] = {0xffffffff,  0xffffffff,  {"Q", "R", "S", "T"} },
>>      [5] = {0xffffffff,  0x0000ffff,  {"U", "V", "W", "X"} },
>> -    [6] = {0xffffff0f,  0x0fffff0f,  {"Y", "Z", "AA", "AB"} },
>> +    [6] = {0x0fffffff,  0x0fffffff,  {"Y", "Z", "AA", "AB"} },
>>      [7] = {0x000000ff,  0x000000ff,  {"AC"} },
>>  };
>>  @@ -805,9 +805,9 @@ static GPIOSetProperties ast2600_3_3v_set_props[] = {
>>      [1] = {0xffffffff,  0xffffffff,  {"E", "F", "G", "H"} },
>>      [2] = {0xffffffff,  0xffffffff,  {"I", "J", "K", "L"} },
>>      [3] = {0xffffffff,  0xffffffff,  {"M", "N", "O", "P"} },
>> -    [4] = {0xffffffff,  0xffffffff,  {"Q", "R", "S", "T"} },
>> -    [5] = {0xffffffff,  0x0000ffff,  {"U", "V", "W", "X"} },
>> -    [6] = {0xffff0000,  0x0fff0000,  {"Y", "Z", "", ""} },
>> +    [4] = {0xffffffff,  0x00ffffff,  {"Q", "R", "S", "T"} },
>> +    [5] = {0xffffffff,  0xffffff00,  {"U", "V", "W", "X"} },
>> +    [6] = {0x0000ffff,  0x0000ffff,  {"Y", "Z"} },
>>  };
>>    static GPIOSetProperties ast2600_1_8v_set_props[] = {