[PATCH 1/3] hw/intc/arm_gicv3: Move checking of redist-region-count to arm_gicv3_common_realize

[Peter Maydell]

The GICv3 devices have an array property redist-region-count.
Currently we check this for errors (bad values) in
gicv3_init_irqs_and_mmio(), just before we use it.  Move this error
checking to the arm_gicv3_common_realize() function, where we
sanity-check all of the other base-class properties. (This will
always be before gicv3_init_irqs_and_mmio() is called, because
that function is called in the subclass realize methods, after
they have called the parent-class realize.)

The motivation for this refactor is:
 * we would like to use the redist_region_count[] values in
   arm_gicv3_common_realize() in a subsequent patch, so we need
   to have already done the sanity-checking first
 * this removes the only use of the Error** argument to
   gicv3_init_irqs_and_mmio(), so we can remove some error-handling
   boilerplate

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/intc/arm_gicv3_common.h |  2 +-
 hw/intc/arm_gicv3.c                |  6 +-----
 hw/intc/arm_gicv3_common.c         | 26 +++++++++++++-------------
 hw/intc/arm_gicv3_kvm.c            |  6 +-----
 4 files changed, 16 insertions(+), 24 deletions(-)

diff --git a/include/hw/intc/arm_gicv3_common.h 
b/include/hw/intc/arm_gicv3_common.h
index aa4f0d67703..cb2b0d0ad45 100644
--- a/include/hw/intc/arm_gicv3_common.h
+++ b/include/hw/intc/arm_gicv3_common.h
@@ -306,6 +306,6 @@ struct ARMGICv3CommonClass {
 };
 
 void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
-                              const MemoryRegionOps *ops, Error **errp);
+                              const MemoryRegionOps *ops);
 
 #endif
diff --git a/hw/intc/arm_gicv3.c b/hw/intc/arm_gicv3.c
index 3f24707838c..bcf54a5f0a5 100644
--- a/hw/intc/arm_gicv3.c
+++ b/hw/intc/arm_gicv3.c
@@ -393,11 +393,7 @@ static void arm_gic_realize(DeviceState *dev, Error **errp)
         return;
     }
 
-    gicv3_init_irqs_and_mmio(s, gicv3_set_irq, gic_ops, &local_err);
-    if (local_err) {
-        error_propagate(errp, local_err);
-        return;
-    }
+    gicv3_init_irqs_and_mmio(s, gicv3_set_irq, gic_ops);
 
     gicv3_init_cpuif(s);
 }
diff --git a/hw/intc/arm_gicv3_common.c b/hw/intc/arm_gicv3_common.c
index 223db16feca..8e47809398b 100644
--- a/hw/intc/arm_gicv3_common.c
+++ b/hw/intc/arm_gicv3_common.c
@@ -250,22 +250,11 @@ static const VMStateDescription vmstate_gicv3 = {
 };
 
 void gicv3_init_irqs_and_mmio(GICv3State *s, qemu_irq_handler handler,
-                              const MemoryRegionOps *ops, Error **errp)
+                              const MemoryRegionOps *ops)
 {
     SysBusDevice *sbd = SYS_BUS_DEVICE(s);
-    int rdist_capacity = 0;
     int i;
 
-    for (i = 0; i < s->nb_redist_regions; i++) {
-        rdist_capacity += s->redist_region_count[i];
-    }
-    if (rdist_capacity < s->num_cpu) {
-        error_setg(errp, "Capacity of the redist regions(%d) "
-                   "is less than number of vcpus(%d)",
-                   rdist_capacity, s->num_cpu);
-        return;
-    }
-
     /* For the GIC, also expose incoming GPIO lines for PPIs for each CPU.
      * GPIO array layout is thus:
      *  [0..N-1] spi
@@ -308,7 +297,7 @@ void gicv3_init_irqs_and_mmio(GICv3State *s, 
qemu_irq_handler handler,
 static void arm_gicv3_common_realize(DeviceState *dev, Error **errp)
 {
     GICv3State *s = ARM_GICV3_COMMON(dev);
-    int i;
+    int i, rdist_capacity;
 
     /* revision property is actually reserved and currently used only in order
      * to keep the interface compatible with GICv2 code, avoiding extra
@@ -350,6 +339,17 @@ static void arm_gicv3_common_realize(DeviceState *dev, 
Error **errp)
         return;
     }
 
+    rdist_capacity = 0;
+    for (i = 0; i < s->nb_redist_regions; i++) {
+        rdist_capacity += s->redist_region_count[i];
+    }
+    if (rdist_capacity < s->num_cpu) {
+        error_setg(errp, "Capacity of the redist regions(%d) "
+                   "is less than number of vcpus(%d)",
+                   rdist_capacity, s->num_cpu);
+        return;
+    }
+
     s->cpu = g_new0(GICv3CPUState, s->num_cpu);
 
     for (i = 0; i < s->num_cpu; i++) {
diff --git a/hw/intc/arm_gicv3_kvm.c b/hw/intc/arm_gicv3_kvm.c
index 5c09f00dec2..ab58c73306d 100644
--- a/hw/intc/arm_gicv3_kvm.c
+++ b/hw/intc/arm_gicv3_kvm.c
@@ -787,11 +787,7 @@ static void kvm_arm_gicv3_realize(DeviceState *dev, Error 
**errp)
         return;
     }
 
-    gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL, &local_err);
-    if (local_err) {
-        error_propagate(errp, local_err);
-        return;
-    }
+    gicv3_init_irqs_and_mmio(s, kvm_arm_gicv3_set_irq, NULL);
 
     for (i = 0; i < s->num_cpu; i++) {
         ARMCPU *cpu = ARM_CPU(qemu_get_cpu(i));
-- 
2.20.1