[PULL 17/53] dino: wire up serial IRQ using a qdev GPIO in machine.c

[Mark Cave-Ayland]

This makes it unnecessary to allocate a separate IRQ for the serial port.

Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Acked-by: Helge Deller <deller@gmx.de>
Message-Id: <20220504092600.10048-18-mark.cave-ayland@ilande.co.uk>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
---
 hw/hppa/dino.c     | 8 +-------
 hw/hppa/hppa_sys.h | 2 +-
 hw/hppa/machine.c  | 7 ++++---
 3 files changed, 6 insertions(+), 11 deletions(-)

diff --git a/hw/hppa/dino.c b/hw/hppa/dino.c
index f58aebf94d..80ffe27188 100644
--- a/hw/hppa/dino.c
+++ b/hw/hppa/dino.c
@@ -404,13 +404,8 @@ static void dino_set_timer_irq(void *opaque, int irq, int 
level)
     /* ??? Not connected.  */
 }
 
-static void dino_set_serial_irq(void *opaque, int irq, int level)
-{
-    dino_set_irq(opaque, 10, level);
-}
-
 DinoState *dino_init(MemoryRegion *addr_space,
-                     qemu_irq *p_rtc_irq, qemu_irq *p_ser_irq)
+                     qemu_irq *p_rtc_irq)
 {
     DeviceState *dev;
     DinoState *s;
@@ -422,7 +417,6 @@ DinoState *dino_init(MemoryRegion *addr_space,
     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
 
     *p_rtc_irq = qemu_allocate_irq(dino_set_timer_irq, s, 0);
-    *p_ser_irq = qemu_allocate_irq(dino_set_serial_irq, s, 0);
 
     return s;
 }
diff --git a/hw/hppa/hppa_sys.h b/hw/hppa/hppa_sys.h
index 88773d2c35..c238e7ebc8 100644
--- a/hw/hppa/hppa_sys.h
+++ b/hw/hppa/hppa_sys.h
@@ -11,7 +11,7 @@
 #include "hppa_hardware.h"
 #include "dino.h"
 
-DinoState *dino_init(MemoryRegion *, qemu_irq *, qemu_irq *);
+DinoState *dino_init(MemoryRegion *, qemu_irq *);
 DeviceState *lasi_init(MemoryRegion *);
 #define enable_lasi_lan()       0
 
diff --git a/hw/hppa/machine.c b/hw/hppa/machine.c
index 5a490a9c37..f757aecda0 100644
--- a/hw/hppa/machine.c
+++ b/hw/hppa/machine.c
@@ -130,7 +130,7 @@ static void machine_hppa_init(MachineState *machine)
     DeviceState *dev, *dino_dev;
     PCIBus *pci_bus;
     ISABus *isa_bus;
-    qemu_irq rtc_irq, serial_irq;
+    qemu_irq rtc_irq;
     char *firmware_filename;
     uint64_t firmware_low, firmware_high;
     long size;
@@ -167,7 +167,7 @@ static void machine_hppa_init(MachineState *machine)
     lasi_init(addr_space);
 
     /* Init Dino (PCI host bus chip).  */
-    dino_dev = DEVICE(dino_init(addr_space, &rtc_irq, &serial_irq));
+    dino_dev = DEVICE(dino_init(addr_space, &rtc_irq));
     memory_region_add_subregion(addr_space, DINO_HPA,
                                 sysbus_mmio_get_region(
                                     SYS_BUS_DEVICE(dino_dev), 0));
@@ -184,7 +184,8 @@ static void machine_hppa_init(MachineState *machine)
     /* Serial code setup.  */
     if (serial_hd(0)) {
         uint32_t addr = DINO_UART_HPA + 0x800;
-        serial_mm_init(addr_space, addr, 0, serial_irq,
+        serial_mm_init(addr_space, addr, 0,
+                       qdev_get_gpio_in(dino_dev, DINO_IRQ_RS232INT),
                        115200, serial_hd(0), DEVICE_BIG_ENDIAN);
     }
 
-- 
2.20.1