[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2] hw: m25p80: allow write_enable latch get/set
From: |
Peter Delevoryas |
Subject: |
Re: [PATCH v2] hw: m25p80: allow write_enable latch get/set |
Date: |
Thu, 12 May 2022 01:38:02 +0000 |
> On May 11, 2022, at 5:54 PM, Iris Chen <irischenlj@fb.com> wrote:
>
> The write_enable latch property is not currently exposed.
> This commit makes it a modifiable property using get/set methods.
>
> Signed-off-by: Iris Chen <irischenlj@fb.com>
> ---
> Ran ./scripts/checkpatch.pl on the patch and added a description. Fixed
> comments regarding DEFINE_PROP_BOOL.
>
> hw/block/m25p80.c | 2 ++
> tests/qtest/aspeed_smc-test.c | 23 +++++++++++++++++++++++
> 2 files changed, 25 insertions(+)
>
> diff --git a/hw/block/m25p80.c b/hw/block/m25p80.c
> index 430d1298a8..019beb5b78 100644
> --- a/hw/block/m25p80.c
> +++ b/hw/block/m25p80.c
> @@ -35,6 +35,7 @@
> #include "qapi/error.h"
> #include "trace.h"
> #include "qom/object.h"
> +#include "qapi/visitor.h"
I think you might be able to remove “#include qapi/visitor.h" now that you’re
using DEFINE_PROP_BOOL.
>
> /* Fields for FlashPartInfo->flags */
>
> @@ -1558,6 +1559,7 @@ static int m25p80_pre_save(void *opaque)
>
> static Property m25p80_properties[] = {
> /* This is default value for Micron flash */
> + DEFINE_PROP_BOOL("write-enable", Flash, write_enable, false),
> DEFINE_PROP_UINT32("nonvolatile-cfg", Flash, nonvolatile_cfg, 0x8FFF),
> DEFINE_PROP_UINT8("spansion-cr1nv", Flash, spansion_cr1nv, 0x0),
> DEFINE_PROP_UINT8("spansion-cr2nv", Flash, spansion_cr2nv, 0x8),
> diff --git a/tests/qtest/aspeed_smc-test.c b/tests/qtest/aspeed_smc-test.c
> index 87b40a0ef1..fcc156bc00 100644
> --- a/tests/qtest/aspeed_smc-test.c
> +++ b/tests/qtest/aspeed_smc-test.c
> @@ -26,6 +26,7 @@
> #include "qemu/osdep.h"
> #include "qemu/bswap.h"
> #include "libqtest-single.h"
> +#include "qemu/bitops.h"
>
> /*
> * ASPEED SPI Controller registers
> @@ -40,6 +41,7 @@
> #define CTRL_FREADMODE 0x1
> #define CTRL_WRITEMODE 0x2
> #define CTRL_USERMODE 0x3
> +#define SR_WEL BIT(1)
>
> #define ASPEED_FMC_BASE 0x1E620000
> #define ASPEED_FLASH_BASE 0x20000000
> @@ -49,6 +51,7 @@
> */
> enum {
> JEDEC_READ = 0x9f,
> + RDSR = 0x5,
> BULK_ERASE = 0xc7,
> READ = 0x03,
> PP = 0x02,
> @@ -348,6 +351,25 @@ static void test_write_page_mem(void)
> flash_reset();
> }
>
> +static void test_read_status_reg(void)
> +{
> + uint8_t r;
> +
> + qmp("{ 'execute': 'qom-set', 'arguments': "
> + "{'path': '/machine/soc/fmc/ssi.0/child[0]', 'property': 'WEL',
> 'value': true}}");
> +
> +
> + spi_conf(CONF_ENABLE_W0);
> + spi_ctrl_start_user();
> + writeb(ASPEED_FLASH_BASE, RDSR);
> + r = readb(ASPEED_FLASH_BASE);
> + spi_ctrl_stop_user();
> +
> + g_assert_cmphex(r & SR_WEL, ==, SR_WEL);
> +
> + flash_reset();
> +}
> +
> static char tmp_path[] = "/tmp/qtest.m25p80.XXXXXX";
>
> int main(int argc, char **argv)
> @@ -373,6 +395,7 @@ int main(int argc, char **argv)
> qtest_add_func("/ast2400/smc/write_page", test_write_page);
> qtest_add_func("/ast2400/smc/read_page_mem", test_read_page_mem);
> qtest_add_func("/ast2400/smc/write_page_mem", test_write_page_mem);
> + qtest_add_func("/ast2400/smc/read_status_reg", test_read_status_reg);
>
> ret = g_test_run();
>
> --
> 2.30.2
>