[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PULL v2 18/86] hw/cxl/rp: Add a root port
From: |
Michael S. Tsirkin |
Subject: |
[PULL v2 18/86] hw/cxl/rp: Add a root port |
Date: |
Mon, 16 May 2022 16:51:07 -0400 |
From: Ben Widawsky <ben.widawsky@intel.com>
This adds just enough of a root port implementation to be able to
enumerate root ports (creating the required DVSEC entries). What's not
here yet is the MMIO nor the ability to write some of the DVSEC entries.
This can be added with the qemu commandline by adding a rootport to a
specific CXL host bridge. For example:
-device cxl-rp,id=rp0,bus="cxl.0",addr=0.0,chassis=4
Like the host bridge patch, the ACPI tables aren't generated at this
point and so system software cannot use it.
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220429144110.25167-17-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
---
hw/pci-bridge/cxl_root_port.c | 236 +++++++++++++++++++++++++++++++++
hw/pci-bridge/pcie_root_port.c | 6 +-
hw/pci/pci.c | 4 +-
hw/pci-bridge/Kconfig | 5 +
hw/pci-bridge/meson.build | 1 +
5 files changed, 250 insertions(+), 2 deletions(-)
create mode 100644 hw/pci-bridge/cxl_root_port.c
diff --git a/hw/pci-bridge/cxl_root_port.c b/hw/pci-bridge/cxl_root_port.c
new file mode 100644
index 0000000000..fb213fa06e
--- /dev/null
+++ b/hw/pci-bridge/cxl_root_port.c
@@ -0,0 +1,236 @@
+/*
+ * CXL 2.0 Root Port Implementation
+ *
+ * Copyright(C) 2020 Intel Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/range.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/pci/pcie_port.h"
+#include "hw/qdev-properties.h"
+#include "hw/sysbus.h"
+#include "qapi/error.h"
+#include "hw/cxl/cxl.h"
+
+#define CXL_ROOT_PORT_DID 0x7075
+
+/* Copied from the gen root port which we derive */
+#define GEN_PCIE_ROOT_PORT_AER_OFFSET 0x100
+#define GEN_PCIE_ROOT_PORT_ACS_OFFSET \
+ (GEN_PCIE_ROOT_PORT_AER_OFFSET + PCI_ERR_SIZEOF)
+#define CXL_ROOT_PORT_DVSEC_OFFSET \
+ (GEN_PCIE_ROOT_PORT_ACS_OFFSET + PCI_ACS_SIZEOF)
+
+typedef struct CXLRootPort {
+ /*< private >*/
+ PCIESlot parent_obj;
+
+ CXLComponentState cxl_cstate;
+ PCIResReserve res_reserve;
+} CXLRootPort;
+
+#define TYPE_CXL_ROOT_PORT "cxl-rp"
+DECLARE_INSTANCE_CHECKER(CXLRootPort, CXL_ROOT_PORT, TYPE_CXL_ROOT_PORT)
+
+static void latch_registers(CXLRootPort *crp)
+{
+ uint32_t *reg_state = crp->cxl_cstate.crb.cache_mem_registers;
+ uint32_t *write_msk = crp->cxl_cstate.crb.cache_mem_regs_write_mask;
+
+ cxl_component_register_init_common(reg_state, write_msk, CXL2_ROOT_PORT);
+}
+
+static void build_dvsecs(CXLComponentState *cxl)
+{
+ uint8_t *dvsec;
+
+ dvsec = (uint8_t *)&(CXLDVSECPortExtensions){ 0 };
+ cxl_component_create_dvsec(cxl, CXL2_ROOT_PORT,
+ EXTENSIONS_PORT_DVSEC_LENGTH,
+ EXTENSIONS_PORT_DVSEC,
+ EXTENSIONS_PORT_DVSEC_REVID, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECPortGPF){
+ .rsvd = 0,
+ .phase1_ctrl = 1, /* 1μs timeout */
+ .phase2_ctrl = 1, /* 1μs timeout */
+ };
+ cxl_component_create_dvsec(cxl, CXL2_ROOT_PORT,
+ GPF_PORT_DVSEC_LENGTH, GPF_PORT_DVSEC,
+ GPF_PORT_DVSEC_REVID, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECPortFlexBus){
+ .cap = 0x26, /* IO, Mem, non-MLD */
+ .ctrl = 0x2,
+ .status = 0x26, /* same */
+ .rcvd_mod_ts_data_phase1 = 0xef,
+ };
+ cxl_component_create_dvsec(cxl, CXL2_ROOT_PORT,
+ PCIE_FLEXBUS_PORT_DVSEC_LENGTH_2_0,
+ PCIE_FLEXBUS_PORT_DVSEC,
+ PCIE_FLEXBUS_PORT_DVSEC_REVID_2_0, dvsec);
+
+ dvsec = (uint8_t *)&(CXLDVSECRegisterLocator){
+ .rsvd = 0,
+ .reg0_base_lo = RBI_COMPONENT_REG | CXL_COMPONENT_REG_BAR_IDX,
+ .reg0_base_hi = 0,
+ };
+ cxl_component_create_dvsec(cxl, CXL2_ROOT_PORT,
+ REG_LOC_DVSEC_LENGTH, REG_LOC_DVSEC,
+ REG_LOC_DVSEC_REVID, dvsec);
+}
+
+static void cxl_rp_realize(DeviceState *dev, Error **errp)
+{
+ PCIDevice *pci_dev = PCI_DEVICE(dev);
+ PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(dev);
+ CXLRootPort *crp = CXL_ROOT_PORT(dev);
+ CXLComponentState *cxl_cstate = &crp->cxl_cstate;
+ ComponentRegisters *cregs = &cxl_cstate->crb;
+ MemoryRegion *component_bar = &cregs->component_registers;
+ Error *local_err = NULL;
+
+ rpc->parent_realize(dev, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
+
+ int rc =
+ pci_bridge_qemu_reserve_cap_init(pci_dev, 0, crp->res_reserve, errp);
+ if (rc < 0) {
+ rpc->parent_class.exit(pci_dev);
+ return;
+ }
+
+ if (!crp->res_reserve.io || crp->res_reserve.io == -1) {
+ pci_word_test_and_clear_mask(pci_dev->wmask + PCI_COMMAND,
+ PCI_COMMAND_IO);
+ pci_dev->wmask[PCI_IO_BASE] = 0;
+ pci_dev->wmask[PCI_IO_LIMIT] = 0;
+ }
+
+ cxl_cstate->dvsec_offset = CXL_ROOT_PORT_DVSEC_OFFSET;
+ cxl_cstate->pdev = pci_dev;
+ build_dvsecs(&crp->cxl_cstate);
+
+ cxl_component_register_block_init(OBJECT(pci_dev), cxl_cstate,
+ TYPE_CXL_ROOT_PORT);
+
+ pci_register_bar(pci_dev, CXL_COMPONENT_REG_BAR_IDX,
+ PCI_BASE_ADDRESS_SPACE_MEMORY |
+ PCI_BASE_ADDRESS_MEM_TYPE_64,
+ component_bar);
+}
+
+static void cxl_rp_reset(DeviceState *dev)
+{
+ PCIERootPortClass *rpc = PCIE_ROOT_PORT_GET_CLASS(dev);
+ CXLRootPort *crp = CXL_ROOT_PORT(dev);
+
+ rpc->parent_reset(dev);
+
+ latch_registers(crp);
+}
+
+static Property gen_rp_props[] = {
+ DEFINE_PROP_UINT32("bus-reserve", CXLRootPort, res_reserve.bus, -1),
+ DEFINE_PROP_SIZE("io-reserve", CXLRootPort, res_reserve.io, -1),
+ DEFINE_PROP_SIZE("mem-reserve", CXLRootPort, res_reserve.mem_non_pref, -1),
+ DEFINE_PROP_SIZE("pref32-reserve", CXLRootPort, res_reserve.mem_pref_32,
+ -1),
+ DEFINE_PROP_SIZE("pref64-reserve", CXLRootPort, res_reserve.mem_pref_64,
+ -1),
+ DEFINE_PROP_END_OF_LIST()
+};
+
+static void cxl_rp_dvsec_write_config(PCIDevice *dev, uint32_t addr,
+ uint32_t val, int len)
+{
+ CXLRootPort *crp = CXL_ROOT_PORT(dev);
+
+ if (range_contains(&crp->cxl_cstate.dvsecs[EXTENSIONS_PORT_DVSEC], addr)) {
+ uint8_t *reg = &dev->config[addr];
+ addr -= crp->cxl_cstate.dvsecs[EXTENSIONS_PORT_DVSEC].lob;
+ if (addr == PORT_CONTROL_OFFSET) {
+ if (pci_get_word(reg) & PORT_CONTROL_UNMASK_SBR) {
+ /* unmask SBR */
+ qemu_log_mask(LOG_UNIMP, "SBR mask control is not
supported\n");
+ }
+ if (pci_get_word(reg) & PORT_CONTROL_ALT_MEMID_EN) {
+ /* Alt Memory & ID Space Enable */
+ qemu_log_mask(LOG_UNIMP,
+ "Alt Memory & ID space is not supported\n");
+ }
+ }
+ }
+}
+
+static void cxl_rp_write_config(PCIDevice *d, uint32_t address, uint32_t val,
+ int len)
+{
+ uint16_t slt_ctl, slt_sta;
+
+ pcie_cap_slot_get(d, &slt_ctl, &slt_sta);
+ pci_bridge_write_config(d, address, val, len);
+ pcie_cap_flr_write_config(d, address, val, len);
+ pcie_cap_slot_write_config(d, slt_ctl, slt_sta, address, val, len);
+ pcie_aer_write_config(d, address, val, len);
+
+ cxl_rp_dvsec_write_config(d, address, val, len);
+}
+
+static void cxl_root_port_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(oc);
+ PCIERootPortClass *rpc = PCIE_ROOT_PORT_CLASS(oc);
+
+ k->vendor_id = PCI_VENDOR_ID_INTEL;
+ k->device_id = CXL_ROOT_PORT_DID;
+ dc->desc = "CXL Root Port";
+ k->revision = 0;
+ device_class_set_props(dc, gen_rp_props);
+ k->config_write = cxl_rp_write_config;
+
+ device_class_set_parent_realize(dc, cxl_rp_realize, &rpc->parent_realize);
+ device_class_set_parent_reset(dc, cxl_rp_reset, &rpc->parent_reset);
+
+ rpc->aer_offset = GEN_PCIE_ROOT_PORT_AER_OFFSET;
+ rpc->acs_offset = GEN_PCIE_ROOT_PORT_ACS_OFFSET;
+
+ dc->hotpluggable = false;
+}
+
+static const TypeInfo cxl_root_port_info = {
+ .name = TYPE_CXL_ROOT_PORT,
+ .parent = TYPE_PCIE_ROOT_PORT,
+ .instance_size = sizeof(CXLRootPort),
+ .class_init = cxl_root_port_class_init,
+ .interfaces = (InterfaceInfo[]) {
+ { INTERFACE_CXL_DEVICE },
+ { }
+ },
+};
+
+static void cxl_register(void)
+{
+ type_register_static(&cxl_root_port_info);
+}
+
+type_init(cxl_register);
diff --git a/hw/pci-bridge/pcie_root_port.c b/hw/pci-bridge/pcie_root_port.c
index f1cfe9d14a..460e48269d 100644
--- a/hw/pci-bridge/pcie_root_port.c
+++ b/hw/pci-bridge/pcie_root_port.c
@@ -67,7 +67,11 @@ static void rp_realize(PCIDevice *d, Error **errp)
int rc;
pci_config_set_interrupt_pin(d->config, 1);
- pci_bridge_initfn(d, TYPE_PCIE_BUS);
+ if (d->cap_present & QEMU_PCIE_CAP_CXL) {
+ pci_bridge_initfn(d, TYPE_CXL_BUS);
+ } else {
+ pci_bridge_initfn(d, TYPE_PCIE_BUS);
+ }
pcie_port_init_reg(d);
rc = pci_bridge_ssvid_init(d, rpc->ssvid_offset, dc->vendor_id,
diff --git a/hw/pci/pci.c b/hw/pci/pci.c
index 6c0656f604..a9b37f8000 100644
--- a/hw/pci/pci.c
+++ b/hw/pci/pci.c
@@ -2762,7 +2762,9 @@ static void pci_device_class_base_init(ObjectClass
*klass, void *data)
object_class_dynamic_cast(klass,
INTERFACE_CONVENTIONAL_PCI_DEVICE);
ObjectClass *pcie =
object_class_dynamic_cast(klass, INTERFACE_PCIE_DEVICE);
- assert(conventional || pcie);
+ ObjectClass *cxl =
+ object_class_dynamic_cast(klass, INTERFACE_CXL_DEVICE);
+ assert(conventional || pcie || cxl);
}
}
diff --git a/hw/pci-bridge/Kconfig b/hw/pci-bridge/Kconfig
index f8df4315ba..02614f49aa 100644
--- a/hw/pci-bridge/Kconfig
+++ b/hw/pci-bridge/Kconfig
@@ -27,3 +27,8 @@ config DEC_PCI
config SIMBA
bool
+
+config CXL
+ bool
+ default y if PCI_EXPRESS && PXB
+ depends on PCI_EXPRESS && MSI_NONBROKEN && PXB
diff --git a/hw/pci-bridge/meson.build b/hw/pci-bridge/meson.build
index daab8acf2a..b6d26a03d5 100644
--- a/hw/pci-bridge/meson.build
+++ b/hw/pci-bridge/meson.build
@@ -5,6 +5,7 @@ pci_ss.add(when: 'CONFIG_IOH3420', if_true: files('ioh3420.c'))
pci_ss.add(when: 'CONFIG_PCIE_PORT', if_true: files('pcie_root_port.c',
'gen_pcie_root_port.c', 'pcie_pci_bridge.c'))
pci_ss.add(when: 'CONFIG_PXB', if_true: files('pci_expander_bridge.c'))
pci_ss.add(when: 'CONFIG_XIO3130', if_true: files('xio3130_upstream.c',
'xio3130_downstream.c'))
+pci_ss.add(when: 'CONFIG_CXL', if_true: files('cxl_root_port.c'))
# NewWorld PowerMac
pci_ss.add(when: 'CONFIG_DEC_PCI', if_true: files('dec.c'))
--
MST
- [PULL v2 08/86] hw/cxl/device: Implement basic mailbox (8.2.8.4), (continued)
- [PULL v2 08/86] hw/cxl/device: Implement basic mailbox (8.2.8.4), Michael S. Tsirkin, 2022/05/16
- [PULL v2 10/86] hw/cxl/device: Add cheap EVENTS implementation (8.2.9.1), Michael S. Tsirkin, 2022/05/16
- [PULL v2 09/86] hw/cxl/device: Add memory device utilities, Michael S. Tsirkin, 2022/05/16
- [PULL v2 11/86] hw/cxl/device: Timestamp implementation (8.2.9.3), Michael S. Tsirkin, 2022/05/16
- [PULL v2 14/86] hw/pci/cxl: Create a CXL bus type, Michael S. Tsirkin, 2022/05/16
- [PULL v2 12/86] hw/cxl/device: Add log commands (8.2.9.4) + CEL, Michael S. Tsirkin, 2022/05/16
- [PULL v2 13/86] hw/pxb: Use a type for realizing expanders, Michael S. Tsirkin, 2022/05/16
- [PULL v2 15/86] cxl: Machine level control on whether CXL support is enabled, Michael S. Tsirkin, 2022/05/16
- [PULL v2 16/86] hw/pxb: Allow creation of a CXL PXB (host bridge), Michael S. Tsirkin, 2022/05/16
- [PULL v2 17/86] qtest/cxl: Introduce initial test for pxb-cxl only., Michael S. Tsirkin, 2022/05/16
- [PULL v2 18/86] hw/cxl/rp: Add a root port,
Michael S. Tsirkin <=
- [PULL v2 19/86] hw/cxl/device: Add a memory device (8.2.8.5), Michael S. Tsirkin, 2022/05/16
- [PULL v2 20/86] hw/cxl/device: Implement MMIO HDM decoding (8.2.5.12), Michael S. Tsirkin, 2022/05/16
- [PULL v2 21/86] hw/cxl/device: Add some trivial commands, Michael S. Tsirkin, 2022/05/16
- [PULL v2 22/86] hw/cxl/device: Plumb real Label Storage Area (LSA) sizing, Michael S. Tsirkin, 2022/05/16
- [PULL v2 23/86] hw/cxl/device: Implement get/set Label Storage Area (LSA), Michael S. Tsirkin, 2022/05/16
- [PULL v2 24/86] qtests/cxl: Add initial root port and CXL type3 tests, Michael S. Tsirkin, 2022/05/16
- [PULL v2 25/86] hw/cxl/component: Implement host bridge MMIO (8.2.5, table 142), Michael S. Tsirkin, 2022/05/16
- [PULL v2 26/86] acpi/cxl: Add _OSC implementation (9.14.2), Michael S. Tsirkin, 2022/05/16
- [PULL v2 27/86] acpi/cxl: Create the CEDT (9.14.1), Michael S. Tsirkin, 2022/05/16
- [PULL v2 28/86] hw/cxl/component: Add utils for interleave parameter encoding/decoding, Michael S. Tsirkin, 2022/05/16