qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v2] ppc/pnv: Add initial P9/10 SBE model


From: Daniel Henrique Barboza
Subject: Re: [PATCH v2] ppc/pnv: Add initial P9/10 SBE model
Date: Tue, 16 Aug 2022 08:32:38 -0300
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:91.0) Gecko/20100101 Thunderbird/91.12.0



On 8/11/22 06:37, Nicholas Piggin wrote:
The SBE (Self Boot Engine) are on-chip microcontrollers that perform
early boot steps, as well as provide some runtime facilities (e.g.,
timer, secure register access, MPIPL). The latter facilities are
accessed mostly via a message system called SBEFIFO.

This driver provides initial emulation for the SBE runtime registers
and a very basic SBEFIFO implementation that provides the timer
command. This covers the basic SBE behaviour expected by skiboot when
booting.

Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
---

Applied to gitlab.com/danielhb/qemu/tree/ppc-7.2 after fixing the following
checkpatch.pl error:


WARNING: line over 80 characters
#282: FILE: hw/ppc/pnv_sbe.c:73:
+#define SBE_HOST_RESPONSE_MASK          (PPC_BITMASK(0, 4) | 
SBE_HOST_TIMER_EXPIRY)

total: 0 errors, 2 warnings, 595 lines checked


Thanks,


Daniel



v2: use trace events instead of open coded debug print macros

  hw/ppc/meson.build         |   1 +
  hw/ppc/pnv.c               |  25 +++
  hw/ppc/pnv_sbe.c           | 413 +++++++++++++++++++++++++++++++++++++
  hw/ppc/pnv_xscom.c         |   3 +
  hw/ppc/trace-events        |  11 +
  include/hw/ppc/pnv.h       |   3 +
  include/hw/ppc/pnv_sbe.h   |  55 +++++
  include/hw/ppc/pnv_xscom.h |  12 ++
  8 files changed, 523 insertions(+)
  create mode 100644 hw/ppc/pnv_sbe.c
  create mode 100644 include/hw/ppc/pnv_sbe.h

diff --git a/hw/ppc/meson.build b/hw/ppc/meson.build
index aa4c8e6a2e..62801923f3 100644
--- a/hw/ppc/meson.build
+++ b/hw/ppc/meson.build
@@ -46,6 +46,7 @@ ppc_ss.add(when: 'CONFIG_POWERNV', if_true: files(
    'pnv_lpc.c',
    'pnv_psi.c',
    'pnv_occ.c',
+  'pnv_sbe.c',
    'pnv_bmc.c',
    'pnv_homer.c',
    'pnv_pnor.c',
diff --git a/hw/ppc/pnv.c b/hw/ppc/pnv.c
index d3f77c8367..7ff1f464d3 100644
--- a/hw/ppc/pnv.c
+++ b/hw/ppc/pnv.c
@@ -1397,6 +1397,8 @@ static void pnv_chip_power9_instance_init(Object *obj)
object_initialize_child(obj, "occ", &chip9->occ, TYPE_PNV9_OCC); + object_initialize_child(obj, "sbe", &chip9->sbe, TYPE_PNV9_SBE);
+
      object_initialize_child(obj, "homer", &chip9->homer, TYPE_PNV9_HOMER);
/* Number of PECs is the chip default */
@@ -1549,6 +1551,17 @@ static void pnv_chip_power9_realize(DeviceState *dev, 
Error **errp)
      memory_region_add_subregion(get_system_memory(), 
PNV9_OCC_SENSOR_BASE(chip),
                                  &chip9->occ.sram_regs);
+ /* SBE */
+    if (!qdev_realize(DEVICE(&chip9->sbe), NULL, errp)) {
+        return;
+    }
+    pnv_xscom_add_subregion(chip, PNV9_XSCOM_SBE_CTRL_BASE,
+                            &chip9->sbe.xscom_ctrl_regs);
+    pnv_xscom_add_subregion(chip, PNV9_XSCOM_SBE_MBOX_BASE,
+                            &chip9->sbe.xscom_mbox_regs);
+    qdev_connect_gpio_out(DEVICE(&chip9->sbe), 0, qdev_get_gpio_in(
+                              DEVICE(&chip9->psi), PSIHB9_IRQ_PSU));
+
      /* HOMER */
      object_property_set_link(OBJECT(&chip9->homer), "chip", OBJECT(chip),
                               &error_abort);
@@ -1613,6 +1626,7 @@ static void pnv_chip_power10_instance_init(Object *obj)
      object_initialize_child(obj, "psi", &chip10->psi, TYPE_PNV10_PSI);
      object_initialize_child(obj, "lpc", &chip10->lpc, TYPE_PNV10_LPC);
      object_initialize_child(obj, "occ",  &chip10->occ, TYPE_PNV10_OCC);
+    object_initialize_child(obj, "sbe",  &chip10->sbe, TYPE_PNV10_SBE);
      object_initialize_child(obj, "homer", &chip10->homer, TYPE_PNV10_HOMER);
chip->num_pecs = pcc->num_pecs;
@@ -1754,6 +1768,17 @@ static void pnv_chip_power10_realize(DeviceState *dev, 
Error **errp)
                                  PNV10_OCC_SENSOR_BASE(chip),
                                  &chip10->occ.sram_regs);
+ /* SBE */
+    if (!qdev_realize(DEVICE(&chip10->sbe), NULL, errp)) {
+        return;
+    }
+    pnv_xscom_add_subregion(chip, PNV10_XSCOM_SBE_CTRL_BASE,
+                            &chip10->sbe.xscom_ctrl_regs);
+    pnv_xscom_add_subregion(chip, PNV10_XSCOM_SBE_MBOX_BASE,
+                            &chip10->sbe.xscom_mbox_regs);
+    qdev_connect_gpio_out(DEVICE(&chip10->sbe), 0, qdev_get_gpio_in(
+                              DEVICE(&chip10->psi), PSIHB9_IRQ_PSU));
+
      /* HOMER */
      object_property_set_link(OBJECT(&chip10->homer), "chip", OBJECT(chip),
                               &error_abort);
diff --git a/hw/ppc/pnv_sbe.c b/hw/ppc/pnv_sbe.c
new file mode 100644
index 0000000000..41420c47bd
--- /dev/null
+++ b/hw/ppc/pnv_sbe.c
@@ -0,0 +1,413 @@
+/*
+ * QEMU PowerPC PowerNV Emulation of some SBE behaviour
+ *
+ * Copyright (c) 2022, IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "target/ppc/cpu.h"
+#include "qapi/error.h"
+#include "qemu/log.h"
+#include "qemu/module.h"
+#include "hw/irq.h"
+#include "hw/qdev-properties.h"
+#include "hw/ppc/pnv.h"
+#include "hw/ppc/pnv_xscom.h"
+#include "hw/ppc/pnv_sbe.h"
+#include "trace.h"
+
+/*
+ * Most register and command definitions come from skiboot.
+ *
+ * xscom addresses are adjusted to be relative to xscom subregion bases
+ */
+
+/*
+ * SBE MBOX register address
+ *   Reg 0 - 3 : Host to send command packets to SBE
+ *   Reg 4 - 7 : SBE to send response packets to Host
+ */
+#define PSU_HOST_SBE_MBOX_REG0          0x00000000
+#define PSU_HOST_SBE_MBOX_REG1          0x00000001
+#define PSU_HOST_SBE_MBOX_REG2          0x00000002
+#define PSU_HOST_SBE_MBOX_REG3          0x00000003
+#define PSU_HOST_SBE_MBOX_REG4          0x00000004
+#define PSU_HOST_SBE_MBOX_REG5          0x00000005
+#define PSU_HOST_SBE_MBOX_REG6          0x00000006
+#define PSU_HOST_SBE_MBOX_REG7          0x00000007
+#define PSU_SBE_DOORBELL_REG_RW         0x00000010
+#define PSU_SBE_DOORBELL_REG_AND        0x00000011
+#define PSU_SBE_DOORBELL_REG_OR         0x00000012
+#define PSU_HOST_DOORBELL_REG_RW        0x00000013
+#define PSU_HOST_DOORBELL_REG_AND       0x00000014
+#define PSU_HOST_DOORBELL_REG_OR        0x00000015
+
+/*
+ * Doorbell register to trigger SBE interrupt. Set by OPAL to inform
+ * the SBE about a waiting message in the Host/SBE mailbox registers
+ */
+#define HOST_SBE_MSG_WAITING            PPC_BIT(0)
+
+/*
+ * Doorbell register for host bridge interrupt. Set by the SBE to inform
+ * host about a response message in the Host/SBE mailbox registers
+ */
+#define SBE_HOST_RESPONSE_WAITING       PPC_BIT(0)
+#define SBE_HOST_MSG_READ               PPC_BIT(1)
+#define SBE_HOST_STOP15_EXIT            PPC_BIT(2)
+#define SBE_HOST_RESET                  PPC_BIT(3)
+#define SBE_HOST_PASSTHROUGH            PPC_BIT(4)
+#define SBE_HOST_TIMER_EXPIRY           PPC_BIT(14)
+#define SBE_HOST_RESPONSE_MASK          (PPC_BITMASK(0, 4) | 
SBE_HOST_TIMER_EXPIRY)
+
+/* SBE Control Register */
+#define SBE_CONTROL_REG_RW              0x00000000
+
+/* SBE interrupt s0/s1 bits */
+#define SBE_CONTROL_REG_S0              PPC_BIT(14)
+#define SBE_CONTROL_REG_S1              PPC_BIT(15)
+
+struct sbe_msg {
+    uint64_t reg[4];
+};
+
+static uint64_t pnv_sbe_power9_xscom_ctrl_read(void *opaque, hwaddr addr,
+                                          unsigned size)
+{
+    uint32_t offset = addr >> 3;
+    uint64_t val = 0;
+
+    switch (offset) {
+    default:
+        qemu_log_mask(LOG_UNIMP, "SBE Unimplemented register: Ox%"
+                      HWADDR_PRIx "\n", addr >> 3);
+    }
+
+    trace_pnv_sbe_xscom_ctrl_read(addr, val);
+
+    return val;
+}
+
+static void pnv_sbe_power9_xscom_ctrl_write(void *opaque, hwaddr addr,
+                                       uint64_t val, unsigned size)
+{
+    uint32_t offset = addr >> 3;
+
+    trace_pnv_sbe_xscom_ctrl_write(addr, val);
+
+    switch (offset) {
+    default:
+        qemu_log_mask(LOG_UNIMP, "SBE Unimplemented register: Ox%"
+                      HWADDR_PRIx "\n", addr >> 3);
+    }
+}
+
+static const MemoryRegionOps pnv_sbe_power9_xscom_ctrl_ops = {
+    .read = pnv_sbe_power9_xscom_ctrl_read,
+    .write = pnv_sbe_power9_xscom_ctrl_write,
+    .valid.min_access_size = 8,
+    .valid.max_access_size = 8,
+    .impl.min_access_size = 8,
+    .impl.max_access_size = 8,
+    .endianness = DEVICE_BIG_ENDIAN,
+};
+
+static void pnv_sbe_set_host_doorbell(PnvSBE *sbe, uint64_t val)
+{
+    val &= SBE_HOST_RESPONSE_MASK; /* Is this right? What does HW do? */
+    sbe->host_doorbell = val;
+
+    trace_pnv_sbe_reg_set_host_doorbell(val);
+    qemu_set_irq(sbe->psi_irq, !!val);
+}
+
+/* SBE Target Type */
+#define SBE_TARGET_TYPE_PROC            0x00
+#define SBE_TARGET_TYPE_EX              0x01
+#define SBE_TARGET_TYPE_PERV            0x02
+#define SBE_TARGET_TYPE_MCS             0x03
+#define SBE_TARGET_TYPE_EQ              0x04
+#define SBE_TARGET_TYPE_CORE            0x05
+
+/* SBE MBOX command class */
+#define SBE_MCLASS_FIRST                0xD1
+#define SBE_MCLASS_CORE_STATE           0xD1
+#define SBE_MCLASS_SCOM                 0xD2
+#define SBE_MCLASS_RING                 0xD3
+#define SBE_MCLASS_TIMER                0xD4
+#define SBE_MCLASS_MPIPL                0xD5
+#define SBE_MCLASS_SECURITY             0xD6
+#define SBE_MCLASS_GENERIC              0xD7
+#define SBE_MCLASS_LAST                 0xD7
+
+/*
+ * Commands are provided in xxyy form where:
+ *   - xx : command class
+ *   - yy : command
+ *
+ * Both request and response message uses same seq ID,
+ * command class and command.
+ */
+#define SBE_CMD_CTRL_DEADMAN_LOOP       0xD101
+#define SBE_CMD_MULTI_SCOM              0xD201
+#define SBE_CMD_PUT_RING_FORM_IMAGE     0xD301
+#define SBE_CMD_CONTROL_TIMER           0xD401
+#define SBE_CMD_GET_ARCHITECTED_REG     0xD501
+#define SBE_CMD_CLR_ARCHITECTED_REG     0xD502
+#define SBE_CMD_SET_UNSEC_MEM_WINDOW    0xD601
+#define SBE_CMD_GET_SBE_FFDC            0xD701
+#define SBE_CMD_GET_CAPABILITY          0xD702
+#define SBE_CMD_READ_SBE_SEEPROM        0xD703
+#define SBE_CMD_SET_FFDC_ADDR           0xD704
+#define SBE_CMD_QUIESCE_SBE             0xD705
+#define SBE_CMD_SET_FABRIC_ID_MAP       0xD706
+#define SBE_CMD_STASH_MPIPL_CONFIG      0xD707
+
+/* SBE MBOX control flags */
+
+/* Generic flags */
+#define SBE_CMD_CTRL_RESP_REQ           0x0100
+#define SBE_CMD_CTRL_ACK_REQ            0x0200
+
+/* Deadman loop */
+#define CTRL_DEADMAN_LOOP_START         0x0001
+#define CTRL_DEADMAN_LOOP_STOP          0x0002
+
+/* Control timer */
+#define CONTROL_TIMER_START             0x0001
+#define CONTROL_TIMER_STOP              0x0002
+
+/* Stash MPIPL config */
+#define SBE_STASH_KEY_SKIBOOT_BASE      0x03
+
+static void sbe_timer(void *opaque)
+{
+    PnvSBE *sbe = opaque;
+
+    trace_pnv_sbe_cmd_timer_expired();
+
+    pnv_sbe_set_host_doorbell(sbe, sbe->host_doorbell | SBE_HOST_TIMER_EXPIRY);
+}
+
+static void do_sbe_msg(PnvSBE *sbe)
+{
+    struct sbe_msg msg;
+    uint16_t cmd, ctrl_flags, seq_id;
+    int i;
+
+    memset(&msg, 0, sizeof(msg));
+
+    for (i = 0; i < 4; i++) {
+        msg.reg[i] = sbe->mbox[i];
+    }
+
+    cmd = msg.reg[0];
+    seq_id = msg.reg[0] >> 16;
+    ctrl_flags = msg.reg[0] >> 32;
+
+    trace_pnv_sbe_msg_recv(cmd, seq_id, ctrl_flags);
+
+    if (ctrl_flags & SBE_CMD_CTRL_ACK_REQ) {
+        pnv_sbe_set_host_doorbell(sbe, sbe->host_doorbell | SBE_HOST_MSG_READ);
+    }
+
+    switch (cmd) {
+    case SBE_CMD_CONTROL_TIMER:
+        if (ctrl_flags & CONTROL_TIMER_START) {
+            uint64_t us = msg.reg[1];
+            trace_pnv_sbe_cmd_timer_start(us);
+            timer_mod(sbe->timer, qemu_clock_get_us(QEMU_CLOCK_VIRTUAL) + us);
+        }
+        if (ctrl_flags & CONTROL_TIMER_STOP) {
+            trace_pnv_sbe_cmd_timer_stop();
+            timer_del(sbe->timer);
+        }
+        break;
+    default:
+        qemu_log_mask(LOG_UNIMP, "SBE Unimplemented command: 0x%x\n", cmd);
+    }
+}
+
+static void pnv_sbe_set_sbe_doorbell(PnvSBE *sbe, uint64_t val)
+{
+    val &= HOST_SBE_MSG_WAITING;
+    sbe->sbe_doorbell = val;
+
+    if (val & HOST_SBE_MSG_WAITING) {
+        sbe->sbe_doorbell &= ~HOST_SBE_MSG_WAITING;
+        do_sbe_msg(sbe);
+    }
+}
+
+static uint64_t pnv_sbe_power9_xscom_mbox_read(void *opaque, hwaddr addr,
+                                          unsigned size)
+{
+    PnvSBE *sbe = PNV_SBE(opaque);
+    uint32_t offset = addr >> 3;
+    uint64_t val = 0;
+
+    if (offset <= PSU_HOST_SBE_MBOX_REG7) {
+        uint32_t idx = offset - PSU_HOST_SBE_MBOX_REG0;
+        val = sbe->mbox[idx];
+    } else {
+        switch (offset) {
+        case PSU_SBE_DOORBELL_REG_RW:
+            val = sbe->sbe_doorbell;
+            break;
+        case PSU_HOST_DOORBELL_REG_RW:
+            val = sbe->host_doorbell;
+            break;
+        default:
+            qemu_log_mask(LOG_UNIMP, "SBE Unimplemented register: Ox%"
+                          HWADDR_PRIx "\n", addr >> 3);
+        }
+    }
+
+    trace_pnv_sbe_xscom_mbox_read(addr, val);
+
+    return val;
+}
+
+static void pnv_sbe_power9_xscom_mbox_write(void *opaque, hwaddr addr,
+                                       uint64_t val, unsigned size)
+{
+    PnvSBE *sbe = PNV_SBE(opaque);
+    uint32_t offset = addr >> 3;
+
+    trace_pnv_sbe_xscom_mbox_write(addr, val);
+
+    if (offset <= PSU_HOST_SBE_MBOX_REG7) {
+        uint32_t idx = offset - PSU_HOST_SBE_MBOX_REG0;
+        sbe->mbox[idx] = val;
+    } else {
+        switch (offset) {
+        case PSU_SBE_DOORBELL_REG_RW:
+            pnv_sbe_set_sbe_doorbell(sbe, val);
+            break;
+        case PSU_SBE_DOORBELL_REG_AND:
+            pnv_sbe_set_sbe_doorbell(sbe, sbe->sbe_doorbell & val);
+            break;
+        case PSU_SBE_DOORBELL_REG_OR:
+            pnv_sbe_set_sbe_doorbell(sbe, sbe->sbe_doorbell | val);
+            break;
+
+        case PSU_HOST_DOORBELL_REG_RW:
+            pnv_sbe_set_host_doorbell(sbe, val);
+            break;
+        case PSU_HOST_DOORBELL_REG_AND:
+            pnv_sbe_set_host_doorbell(sbe, sbe->host_doorbell & val);
+            break;
+        case PSU_HOST_DOORBELL_REG_OR:
+            pnv_sbe_set_host_doorbell(sbe, sbe->host_doorbell | val);
+            break;
+
+        default:
+            qemu_log_mask(LOG_UNIMP, "SBE Unimplemented register: Ox%"
+                          HWADDR_PRIx "\n", addr >> 3);
+        }
+    }
+}
+
+static const MemoryRegionOps pnv_sbe_power9_xscom_mbox_ops = {
+    .read = pnv_sbe_power9_xscom_mbox_read,
+    .write = pnv_sbe_power9_xscom_mbox_write,
+    .valid.min_access_size = 8,
+    .valid.max_access_size = 8,
+    .impl.min_access_size = 8,
+    .impl.max_access_size = 8,
+    .endianness = DEVICE_BIG_ENDIAN,
+};
+
+static void pnv_sbe_power9_class_init(ObjectClass *klass, void *data)
+{
+    PnvSBEClass *psc = PNV_SBE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "PowerNV SBE Controller (POWER9)";
+    psc->xscom_ctrl_size = PNV9_XSCOM_SBE_CTRL_SIZE;
+    psc->xscom_ctrl_ops = &pnv_sbe_power9_xscom_ctrl_ops;
+    psc->xscom_mbox_size = PNV9_XSCOM_SBE_MBOX_SIZE;
+    psc->xscom_mbox_ops = &pnv_sbe_power9_xscom_mbox_ops;
+}
+
+static const TypeInfo pnv_sbe_power9_type_info = {
+    .name          = TYPE_PNV9_SBE,
+    .parent        = TYPE_PNV_SBE,
+    .instance_size = sizeof(PnvSBE),
+    .class_init    = pnv_sbe_power9_class_init,
+};
+
+static void pnv_sbe_power10_class_init(ObjectClass *klass, void *data)
+{
+    PnvSBEClass *psc = PNV_SBE_CLASS(klass);
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->desc = "PowerNV SBE Controller (POWER10)";
+    psc->xscom_ctrl_size = PNV10_XSCOM_SBE_CTRL_SIZE;
+    psc->xscom_ctrl_ops = &pnv_sbe_power9_xscom_ctrl_ops;
+    psc->xscom_mbox_size = PNV10_XSCOM_SBE_MBOX_SIZE;
+    psc->xscom_mbox_ops = &pnv_sbe_power9_xscom_mbox_ops;
+}
+
+static const TypeInfo pnv_sbe_power10_type_info = {
+    .name          = TYPE_PNV10_SBE,
+    .parent        = TYPE_PNV9_SBE,
+    .class_init    = pnv_sbe_power10_class_init,
+};
+
+static void pnv_sbe_realize(DeviceState *dev, Error **errp)
+{
+    PnvSBE *sbe = PNV_SBE(dev);
+    PnvSBEClass *psc = PNV_SBE_GET_CLASS(sbe);
+
+    /* XScom regions for SBE registers */
+    pnv_xscom_region_init(&sbe->xscom_ctrl_regs, OBJECT(dev),
+                          psc->xscom_ctrl_ops, sbe, "xscom-sbe-ctrl",
+                          psc->xscom_ctrl_size);
+    pnv_xscom_region_init(&sbe->xscom_mbox_regs, OBJECT(dev),
+                          psc->xscom_mbox_ops, sbe, "xscom-sbe-mbox",
+                          psc->xscom_mbox_size);
+
+    qdev_init_gpio_out(DEVICE(dev), &sbe->psi_irq, 1);
+
+    sbe->timer = timer_new_us(QEMU_CLOCK_VIRTUAL, sbe_timer, sbe);
+}
+
+static void pnv_sbe_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = pnv_sbe_realize;
+    dc->desc = "PowerNV SBE Controller";
+    dc->user_creatable = false;
+}
+
+static const TypeInfo pnv_sbe_type_info = {
+    .name          = TYPE_PNV_SBE,
+    .parent        = TYPE_DEVICE,
+    .instance_size = sizeof(PnvSBE),
+    .class_init    = pnv_sbe_class_init,
+    .class_size    = sizeof(PnvSBEClass),
+    .abstract      = true,
+};
+
+static void pnv_sbe_register_types(void)
+{
+    type_register_static(&pnv_sbe_type_info);
+    type_register_static(&pnv_sbe_power9_type_info);
+    type_register_static(&pnv_sbe_power10_type_info);
+}
+
+type_init(pnv_sbe_register_types);
diff --git a/hw/ppc/pnv_xscom.c b/hw/ppc/pnv_xscom.c
index 9ce018dbc2..79f10de57f 100644
--- a/hw/ppc/pnv_xscom.c
+++ b/hw/ppc/pnv_xscom.c
@@ -295,6 +295,9 @@ int pnv_dt_xscom(PnvChip *chip, void *fdt, int root_offset,
      _FDT((fdt_setprop(fdt, xscom_offset, "reg", reg, sizeof(reg))));
      _FDT((fdt_setprop(fdt, xscom_offset, "compatible", compat, compat_size)));
      _FDT((fdt_setprop(fdt, xscom_offset, "scom-controller", NULL, 0)));
+    if (chip->chip_id == 0) {
+        _FDT((fdt_setprop(fdt, xscom_offset, "primary", NULL, 0)));
+    }
args.fdt = fdt;
      args.xscom_offset = xscom_offset;
diff --git a/hw/ppc/trace-events b/hw/ppc/trace-events
index 5c0a215cad..f6990439d1 100644
--- a/hw/ppc/trace-events
+++ b/hw/ppc/trace-events
@@ -95,6 +95,17 @@ vof_write(uint32_t ih, unsigned cb, const char *msg) "ih=0x%x [%u] 
\"%s\""
  vof_avail(uint64_t start, uint64_t end, uint64_t size) "0x%"PRIx64"..0x%"PRIx64" 
size=0x%"PRIx64
  vof_claimed(uint64_t start, uint64_t end, uint64_t size) "0x%"PRIx64"..0x%"PRIx64" 
size=0x%"PRIx64
+# pnv_sbe.c
+pnv_sbe_xscom_ctrl_read(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 
0x%" PRIx64
+pnv_sbe_xscom_ctrl_write(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 
0x%" PRIx64
+pnv_sbe_xscom_mbox_read(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 
0x%" PRIx64
+pnv_sbe_xscom_mbox_write(uint64_t addr, uint64_t val) "addr 0x%" PRIx64 " val 
0x%" PRIx64
+pnv_sbe_reg_set_host_doorbell(uint64_t val) "val 0x%" PRIx64
+pnv_sbe_cmd_timer_start(uint64_t ns) "ns 0x%" PRIu64
+pnv_sbe_cmd_timer_stop(void) ""
+pnv_sbe_cmd_timer_expired(void) ""
+pnv_sbe_msg_recv(uint16_t cmd, uint16_t seq, uint16_t ctrl_flags) "cmd 0x%" PRIx16 " seq 
%"PRIu16 " ctrl_flags 0x%" PRIx16
+
  # ppc.c
  ppc_tb_adjust(uint64_t offs1, uint64_t offs2, int64_t diff, int64_t seconds) "adjusted from 0x%"PRIx64" to 
0x%"PRIx64", diff %"PRId64" (%"PRId64"s)"
  ppc_tb_load(uint64_t tb) "tb 0x%016" PRIx64
diff --git a/include/hw/ppc/pnv.h b/include/hw/ppc/pnv.h
index b991194223..37c303bf36 100644
--- a/include/hw/ppc/pnv.h
+++ b/include/hw/ppc/pnv.h
@@ -27,6 +27,7 @@
  #include "hw/ppc/pnv_pnor.h"
  #include "hw/ppc/pnv_psi.h"
  #include "hw/ppc/pnv_occ.h"
+#include "hw/ppc/pnv_sbe.h"
  #include "hw/ppc/pnv_homer.h"
  #include "hw/ppc/pnv_xive.h"
  #include "hw/ppc/pnv_core.h"
@@ -100,6 +101,7 @@ struct Pnv9Chip {
      Pnv9Psi      psi;
      PnvLpcController lpc;
      PnvOCC       occ;
+    PnvSBE       sbe;
      PnvHomer     homer;
uint32_t nr_quads;
@@ -129,6 +131,7 @@ struct Pnv10Chip {
      Pnv9Psi      psi;
      PnvLpcController lpc;
      PnvOCC       occ;
+    PnvSBE       sbe;
      PnvHomer     homer;
uint32_t nr_quads;
diff --git a/include/hw/ppc/pnv_sbe.h b/include/hw/ppc/pnv_sbe.h
new file mode 100644
index 0000000000..f54a3ae9ba
--- /dev/null
+++ b/include/hw/ppc/pnv_sbe.h
@@ -0,0 +1,55 @@
+/*
+ * QEMU PowerPC PowerNV Emulation of some SBE behaviour
+ *
+ * Copyright (c) 2022, IBM Corporation.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef PPC_PNV_SBE_H
+#define PPC_PNV_SBE_H
+
+#include "qom/object.h"
+
+#define TYPE_PNV_SBE "pnv-sbe"
+OBJECT_DECLARE_TYPE(PnvSBE, PnvSBEClass, PNV_SBE)
+#define TYPE_PNV9_SBE TYPE_PNV_SBE "-POWER9"
+DECLARE_INSTANCE_CHECKER(PnvSBE, PNV9_SBE, TYPE_PNV9_SBE)
+#define TYPE_PNV10_SBE TYPE_PNV_SBE "-POWER10"
+DECLARE_INSTANCE_CHECKER(PnvSBE, PNV10_SBE, TYPE_PNV10_SBE)
+
+struct PnvSBE {
+    DeviceState xd;
+
+    uint64_t mbox[8];
+    uint64_t sbe_doorbell;
+    uint64_t host_doorbell;
+
+    qemu_irq psi_irq;
+    QEMUTimer *timer;
+
+    MemoryRegion xscom_mbox_regs;
+    MemoryRegion xscom_ctrl_regs;
+};
+
+struct PnvSBEClass {
+    DeviceClass parent_class;
+
+    int xscom_ctrl_size;
+    int xscom_mbox_size;
+    const MemoryRegionOps *xscom_ctrl_ops;
+    const MemoryRegionOps *xscom_mbox_ops;
+};
+
+#endif /* PPC_PNV_SBE_H */
diff --git a/include/hw/ppc/pnv_xscom.h b/include/hw/ppc/pnv_xscom.h
index 7c7440de0c..c6e9ef8dd2 100644
--- a/include/hw/ppc/pnv_xscom.h
+++ b/include/hw/ppc/pnv_xscom.h
@@ -92,6 +92,12 @@ struct PnvXScomInterfaceClass {
  #define PNV9_XSCOM_OCC_BASE       PNV_XSCOM_OCC_BASE
  #define PNV9_XSCOM_OCC_SIZE       0x8000
+#define PNV9_XSCOM_SBE_CTRL_BASE 0x00050008
+#define PNV9_XSCOM_SBE_CTRL_SIZE  0x1
+
+#define PNV9_XSCOM_SBE_MBOX_BASE  0x000D0050
+#define PNV9_XSCOM_SBE_MBOX_SIZE  0x16
+
  #define PNV9_XSCOM_PBA_BASE       0x5012b00
  #define PNV9_XSCOM_PBA_SIZE       0x40
@@ -134,6 +140,12 @@ struct PnvXScomInterfaceClass {
  #define PNV10_XSCOM_OCC_BASE       PNV9_XSCOM_OCC_BASE
  #define PNV10_XSCOM_OCC_SIZE       PNV9_XSCOM_OCC_SIZE
+#define PNV10_XSCOM_SBE_CTRL_BASE PNV9_XSCOM_SBE_CTRL_BASE
+#define PNV10_XSCOM_SBE_CTRL_SIZE  PNV9_XSCOM_SBE_CTRL_SIZE
+
+#define PNV10_XSCOM_SBE_MBOX_BASE  PNV9_XSCOM_SBE_MBOX_BASE
+#define PNV10_XSCOM_SBE_MBOX_SIZE  PNV9_XSCOM_SBE_MBOX_SIZE
+
  #define PNV10_XSCOM_PBA_BASE       0x01010CDA
  #define PNV10_XSCOM_PBA_SIZE       0x40



reply via email to

[Prev in Thread] Current Thread [Next in Thread]