qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v11 0/5] riscv: Allow user to set the satp mode


From: Alexandre Ghiti
Subject: Re: [PATCH v11 0/5] riscv: Allow user to set the satp mode
Date: Mon, 6 Mar 2023 09:33:20 +0100

Hi Palmer,

On Mon, Mar 6, 2023 at 12:34 AM Palmer Dabbelt <palmer@dabbelt.com> wrote:
>
> On Fri, 03 Mar 2023 05:12:47 PST (-0800), alexghiti@rivosinc.com wrote:
> > This introduces new properties to allow the user to set the satp mode,
> > see patch 3 for full syntax. In addition, it prevents cpus to boot in a
> > satp mode they do not support (see patch 4).
> >
> > base-commit: commit c61d1a066cb6 ("Merge tag 'for-upstream' of
> > https://gitlab.com/bonzini/qemu into staging")
>
> I have that, but I still got some merge conflicts.  I've put that here
> <https://github.com/palmer-dabbelt/qemu/tree/set-satp> for now, pending
> Daniel's response below.

Weird, I have just tried again and it applied cleanly on the
base-commit I mentioned, I tried to cherry-pick a few patches, even
commit d4ea71170432 ("target/riscv: introduce riscv_cpu_cfg()") does
not break the merge.

Anyway, FWIW I checked the patches on the set-satp branch again, and
your merge seems ok.

>
> >
> > v11:
> > - rebase on top of master
> > - Added RB/AB from Frank and Alistair
> > - Use VM_1_10_XX directly instead of satp_mode_from_str, from Frank
> > - Set satp mode max for thead c906 to sv39
>
> Daniel: It looks like the feedback on v10 included dropping the first
> patch
> <66d80b94-5941-31f3-995f-e9666a91fbb7@ventanamicro.com/T/#macdb6c5232bd8c082966107d7b44aaaec9b29ad6">https://lore.kernel.org/qemu-devel/66d80b94-5941-31f3-995f-e9666a91fbb7@ventanamicro.com/T/#macdb6c5232bd8c082966107d7b44aaaec9b29ad6>.
> Sorry if I'm just misunderstanding, but it looks to me like that patch
> is still useful and the v11 doesn't even build without it.

No, the first commit is a preparatory commit for the series, it is required.


>
> >
> > v10:
> > - Fix user mode build by surrounding satp handling with #ifndef
> >   CONFIG_USER_ONLY, Frank
> > - Fix AB/RB from Frank and Alistair
> >
> > v9:
> > - Move valid_vm[i] up, Andrew
> > - Fixed expansion of the bitmap map, Bin
> > - Rename set_satp_mode_default into set_satp_mode_default_map, Bin
> > - Remove outer parenthesis and alignment, Bin
> > - Fix qemu32 build failure, Bin
> > - Fixed a few typos, Bin
> > - Add RB from Andrew and Bin
> >
> > v8:
> > - Remove useless !map check, Andrew
> > - Add RB from Andrew
> >
> > v7:
> > - Expand map to contain all valid modes, Andrew
> > - Fix commit log for patch 3, Andrew
> > - Remove is_32_bit argument from set_satp_mode_default, Andrew
> > - Move and fixed comment, Andrew
> > - Fix satp_mode_map_max in riscv_cpu_satp_mode_finalize which was set
> >   too early, Alex
> > - Remove is_32_bit argument from set_satp_mode_max_supported, Andrew
> > - Use satp_mode directly instead of a string in
> >   set_satp_mode_max_supported, Andrew
> > - Swap the patch introducing supported bitmap and the patch that sets
> >   sv57 in the dt, Andrew
> > - Add various RB from Andrew and Alistair, thanks
> >
> > v6:
> > - Remove the valid_vm check in validate_vm and add it to the finalize 
> > function
> >   so that map already contains the constraint, Alex
> > - Add forgotten mbare to satp_mode_from_str, Alex
> > - Move satp mode properties handling to riscv_cpu_satp_mode_finalize, Andrew
> > - Only add satp mode properties corresponding to the cpu, and then remove 
> > the
> >   check against valid_vm_1_10_32/64 in riscv_cpu_satp_mode_finalize,
> >   Andrew/Alistair/Alex
> > - Move mmu-type setting to its own patch, Andrew
> > - patch 5 is new and is a fix, Alex
> >
> > v5:
> > - Simplify v4 implementation by leveraging valid_vm_1_10_32/64, as
> >   suggested by Andrew
> > - Split the v4 patch into 2 patches as suggested by Andrew
> > - Lot of other minor corrections, from Andrew
> > - Set the satp mode N by disabling the satp mode N + 1
> > - Add a helper to set satp mode from a string, as suggested by Frank
> >
> > v4:
> > - Use custom boolean properties instead of OnOffAuto properties, based
> >   on ARMVQMap, as suggested by Andrew
> >
> > v3:
> > - Free sv_name as pointed by Bin
> > - Replace satp-mode with boolean properties as suggested by Andrew
> > - Removed RB from Atish as the patch considerably changed
> >
> > v2:
> > - Use error_setg + return as suggested by Alistair
> > - Add RB from Atish
> > - Fixed checkpatch issues missed in v1
> > - Replaced Ludovic email address with the rivos one
> >
> > Alexandre Ghiti (5):
> >   riscv: Pass Object to register_cpu_props instead of DeviceState
> >   riscv: Change type of valid_vm_1_10_[32|64] to bool
> >   riscv: Allow user to set the satp mode
> >   riscv: Introduce satp mode hw capabilities
> >   riscv: Correctly set the device-tree entry 'mmu-type'
> >
> >  hw/riscv/virt.c    |  19 +--
> >  target/riscv/cpu.c | 288 ++++++++++++++++++++++++++++++++++++++++++---
> >  target/riscv/cpu.h |  25 ++++
> >  target/riscv/csr.c |  29 +++--
> >  4 files changed, 323 insertions(+), 38 deletions(-)



reply via email to

[Prev in Thread] Current Thread [Next in Thread]