[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [Qemu-devel] [PATCH 09/12] spapr_pci: enable basic hotplu
From: |
Michael Roth |
Subject: |
Re: [Qemu-ppc] [Qemu-devel] [PATCH 09/12] spapr_pci: enable basic hotplug operations |
Date: |
Thu, 04 Sep 2014 11:34:14 -0500 |
User-agent: |
alot/0.3.4 |
Quoting Michael Roth (2014-09-04 11:12:15)
> Quoting Bharata B Rao (2014-09-04 10:08:20)
> > On Thu, Sep 4, 2014 at 4:33 AM, Michael Roth <address@hidden> wrote:
> > >> > +static int spapr_device_hotplug_add(DeviceState *qdev, PCIDevice *dev)
> > >> > +{
> > >> > + sPAPRPHBState *phb = SPAPR_PCI_HOST_BRIDGE(qdev);
> > >> > + sPAPRDrcEntry *drc_entry, *drc_entry_slot;
> > >> > + sPAPRConfigureConnectorState *ccs;
> > >> > + int slot = PCI_SLOT(dev->devfn);
> > >> > + int offset, ret;
> > >> > + void *fdt_orig, *fdt;
> > >> > + char nodename[512];
> > >> > + uint32_t encoded =
> > >> > ENCODE_DRC_STATE(INDICATOR_ENTITY_SENSE_PRESENT,
> > >> > + INDICATOR_ENTITY_SENSE_MASK,
> > >> > + INDICATOR_ENTITY_SENSE_SHIFT);
> > >> > +
> > >>
> > >> I am building on this infrastructure of yours and adding CPU hotplug
> > >> support to sPAPR guests.
> > >>
> > >> So we start with dr state of UNUSABLE and change it to PRESENT like
> > >> above when performing hotplug operation. But after this, in case of
> > >> CPU hotplug, the CPU hotplug code in the kernel
> > >> (arch/powerpc/platforms/pseries/dlpar.c:dlpar_acquire_drc()) does
> > >> get-sensor-state rtas call and expects the dr state to be UNUSABLE. Is
> > >> the guest kernel right in expecting dr state to be in UNUSABLE state
> > >> like this ? I have in fact disabled this check in the guest kernel to
> > >> get a CPU hotplugged successfully, but wanted to understand the state
> > >> changes and the expectations from the guest kernel correctly.
> > >
> > > According to PAPR+ 2.7 13.5.3.3,
> > >
> > > PRESENT (1):
> > >
> > > Returned for logical and physical DR entities when the DR connector is
> > > allocated to the OS and the DR entity is present. For physical DR
> > > entities,
> > > this indicates that the DR connector actually has a DR entity plugged
> > > into
> > > it. For DR connectors of physical DR entities, the DR connector must be
> > > allocated to the OS to return this value, otherwise a status of -3, no
> > > such
> > > sensor implemented, will be returned from the get-sensor-state RTAS
> > > call. For
> > > DR connectors of logical DR entities, the DR connector must be
> > > allocated to
> > > the OS to return this value, otherwise a sensor value of 2 or 3 will be
> > > returned.
> > >
> > > UNUSABLE (2):
> > >
> > > Returned for logical DR entities when the DR entity is not currently
> > > available to the OS, but may possibly be made available to the OS by
> > > calling
> > > set-indicator with the allocation-state indicator, setting that
> > > indicator to
> > > usable.
> > >
> > > So it seems 'PRESENT' is in fact the right value immediately after PCI
> > > hotplug, but it doesn't seem clear from the documentation whether
> > > 'PRESENT'
> > > or 'UNUSABLE' is more correct immediately after CPU hotplug. What does
> > > seem clear as that UNUSABLE does not have any use in the case of PCI
> > > devices: just PRESENT/EMPTY(0).
> > >
> > > But we actually 0-initialize the sensor field for DRCEntrys corresponding
> > > to PCI devices, which corresponds to 'EMPTY' (0), so the handling seems
> > > correct for PCI devices...
> >
> > Thanks Michael for the above information on PRESENT and USABLE states.
> >
> > >
> > > And since we already initialize PHB sensors to UNUSABLE in the top-level
> > > DRC list, I'm not sure why adjacent CPU entries would be affected by what
> > > we do later for PCI devices?
> >
> > Sorry if I wasn't clear enough in my previous mail. CPU hotplug isn't
> > affected by what you do for PCI devices, but...
> >
> > > It seems like you'd just need to do the
> > > equivalent of what we do for PHBs during realize:
> >
> > when I try to do the same state changes for CPU hotplug, things don't
> > work as expected.
> >
> > >
> > > spapr_add_phb_to_drc_table(sphb->buid, 2 /* Unusable */);
> > >
> > > So I'm not sure where the need for guest kernel changes is coming from for
> > > CPU hotplug.
> >
> > When the resource is hotplugged, you change the state from UNUSABLE to
> > PRESENT in QEMU before signalling the guest (via check exception irq).
> > But the same state change in CPU hotplug case isn't as per guest
> > kernel's expectation.
> >
> > > Do you have a snippet of what the initialize/hot_add hooks
> > > like in your case?
> >
> > I am talking about this piece of code in the the kernel in
> > arch/powerpc/platforms/pseries/dlpar.c
> >
> > int dlpar_acquire_drc(u32 drc_index)
> > {
> > int dr_status, rc;
> >
> > rc = rtas_call(rtas_token("get-sensor-state"), 2, 2, &dr_status,
> > DR_ENTITY_SENSE, drc_index);
> > if (rc || dr_status != DR_ENTITY_UNUSABLE)
> > return -1;
> > ...
> > }
> >
> > I have circumvented this problem by not setting the state to PRESENT
> > in my current hotplug patch. You can refer to the same in
> > spapr_cpu_hotplug_add() routine that's part of my patch 14/15
> > (https://lists.gnu.org/archive/html/qemu-devel/2014-09/msg00757.html)
>
> Yah, that's what I was getting at: at least just to get things working
> for testing, just avoid the PRESENT bits in your hot_add_cpu hook rather
> than patching the guest. Unfortunately the documentation isn't particularly
> clear about which of these approaches is more correct as far as CPUs go. But
> looking at it again:
>
> UNUSABLE (2):
>
> Returned for logical DR entities when the DR entity is not currently
> available to the OS, but may possibly be made available to the OS by
> calling
> set-indicator with the allocation-state indicator, setting that indicator
> to
> usable.
>
> That 'usable' indicator setting is documented for set-indicator as (1), which
> happens to correspond to PRESENT (1). So my read would be that for 'physical'
> hotplug (like PCI), the firmware changes the indicator state to PRESENT/USABLE
> immediately after hotplug, whereas with 'logical' hotplug (like PHB/CPU), the
> guest OS signals this transition to USABLE through set-indicator calls for the
> 9003 sensor/allocation state after hotplug (which also seems to match up with
> the kernel code).
>
> This seems to correspond with the dlpar_acquire_drc() function, but I'm a
> little confused why that's not also called in the PHB path...I think maybe
> in that case it's handled by drmgr in userspace... will take another look
> to confirm.
Yah, here's the code from drmgr, same expectations:
int
acquire_drc(uint32_t drc_index)
{
int rc;
say(DEBUG, "Acquiring drc index 0x%x\n", drc_index);
rc = dr_entity_sense(drc_index);
if (rc != STATE_UNUSABLE) {
say(ERROR, "Entity sense failed for drc %x with %d\n%s\n",
drc_index, rc, entity_sense_error(rc));
return -1;
}
say(DEBUG, "Setting allocation state to 'alloc usable'\n");
rc = rtas_set_indicator(ALLOCATION_STATE, drc_index, ALLOC_USABLE);
if (rc) {
say(ERROR, "Allocation failed for drc %x with %d\n%s\n",
drc_index, rc, set_indicator_error(rc));
return -1;
}
say(DEBUG, "Setting indicator state to 'unisolate'\n");
rc = rtas_set_indicator(ISOLATION_STATE, drc_index, UNISOLATE);
if (rc) {
int ret;
rc = -1;
say(ERROR, "Unisolate failed for drc %x with %d\n%s\n",
drc_index, rc, set_indicator_error(rc));
ret = rtas_set_indicator(ALLOCATION_STATE, drc_index,
ALLOC_UNUSABLE);
if (ret) {
say(ERROR, "Failed recovery to unusable state after "
"unisolate failure for drc %x with %d\n%s\n",
drc_index, ret, set_indicator_error(ret));
}
}
return rc;
}
>
> >
> > Regards,
> > Bharata.