[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-ppc] [Qemu-devel] [PATCH v4 16/17] spapr_pci: enable basic hot
From: |
Michael Roth |
Subject: |
Re: [Qemu-ppc] [Qemu-devel] [PATCH v4 16/17] spapr_pci: enable basic hotplug operations |
Date: |
Mon, 26 Jan 2015 15:17:31 -0600 |
User-agent: |
alot/0.3.4 |
Quoting David Gibson (2015-01-18 23:58:28)
> On Tue, Dec 23, 2014 at 06:30:30AM -0600, Michael Roth wrote:
> > This enables hotplug for PHB bridges. Upon hotplug we generate the
> > OF-nodes required by PAPR specification and IEEE 1275-1994
> > "PCI Bus Binding to Open Firmware" for the device.
> >
> > We associate the corresponding FDT for these nodes with the DrcEntry
> > corresponding to the slot, which will be fetched via
> > ibm,configure-connector RTAS calls by the guest as described by PAPR
> > specification. The FDT is cleaned up in the case of unplug.
> >
> > Signed-off-by: Michael Roth <address@hidden>
> > ---
> > hw/ppc/spapr_pci.c | 268
> > +++++++++++++++++++++++++++++++++++++++++++++++++----
> > 1 file changed, 249 insertions(+), 19 deletions(-)
> >
> > diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
> > index a5d7791..94e33b4 100644
> > --- a/hw/ppc/spapr_pci.c
> > +++ b/hw/ppc/spapr_pci.c
> > @@ -33,6 +33,7 @@
> > #include <libfdt.h>
> > #include "trace.h"
> > #include "qemu/error-report.h"
> > +#include "qapi/qmp/qerror.h"
> >
> > #include "hw/pci/pci_bus.h"
> >
> > @@ -51,6 +52,15 @@
> >
> > #include "hw/ppc/spapr_drc.h"
> >
> > +#define FDT_MAX_SIZE 0x10000
> > +#define _FDT(exp) \
> > + do { \
> > + int ret = (exp); \
> > + if (ret < 0) { \
> > + return ret; \
> > + } \
> > + } while (0)
> > +
> > static sPAPRPHBState *find_phb(sPAPREnvironment *spapr, uint64_t buid)
> > {
> > sPAPRPHBState *sphb;
> > @@ -483,6 +493,237 @@ static AddressSpace *spapr_pci_dma_iommu(PCIBus *bus,
> > void *opaque, int devfn)
> > return &phb->iommu_as;
> > }
> >
> > +/* Macros to operate with address in OF binding to PCI */
> > +#define b_x(x, p, l) (((x) & ((1<<(l))-1)) << (p))
> > +#define b_n(x) b_x((x), 31, 1) /* 0 if relocatable */
> > +#define b_p(x) b_x((x), 30, 1) /* 1 if prefetchable */
> > +#define b_t(x) b_x((x), 29, 1) /* 1 if the address is aliased */
> > +#define b_ss(x) b_x((x), 24, 2) /* the space code */
> > +#define b_bbbbbbbb(x) b_x((x), 16, 8) /* bus number */
> > +#define b_ddddd(x) b_x((x), 11, 5) /* device number */
> > +#define b_fff(x) b_x((x), 8, 3) /* function number */
> > +#define b_rrrrrrrr(x) b_x((x), 0, 8) /* register number */
> > +
> > +/* for 'reg'/'assigned-addresses' OF properties */
> > +#define RESOURCE_CELLS_SIZE 2
> > +#define RESOURCE_CELLS_ADDRESS 3
> > +#define RESOURCE_CELLS_TOTAL \
> > + (RESOURCE_CELLS_SIZE + RESOURCE_CELLS_ADDRESS)
> > +
> > +static void fill_resource_props(PCIDevice *d, int bus_num,
> > + uint32_t *reg, int *reg_size,
> > + uint32_t *assigned, int *assigned_size)
>
> This is another interface which writes to a buffer without any size
> limit information being passed through, which makes me nervous.
>
> > +{
> > + uint32_t *reg_row, *assigned_row;
> > + uint32_t dev_id = (b_bbbbbbbb(bus_num) |
> > + b_ddddd(PCI_SLOT(d->devfn)) |
> > + b_fff(PCI_FUNC(d->devfn)));
> > + int i, idx = 0;
> > +
> > + reg[0] = cpu_to_be32(dev_id);
> > +
> > + for (i = 0; i < PCI_NUM_REGIONS; i++) {
> > + if (!d->io_regions[i].size) {
> > + continue;
> > + }
> > + reg_row = ®[(idx + 1) * RESOURCE_CELLS_TOTAL];
> > + assigned_row = &assigned[idx * RESOURCE_CELLS_TOTAL];
> > + reg_row[0] = cpu_to_be32(dev_id | b_rrrrrrrr(pci_bar(d, i)));
> > + if (d->io_regions[i].type & PCI_BASE_ADDRESS_SPACE_IO) {
> > + reg_row[0] |= cpu_to_be32(b_ss(1));
> > + } else {
> > + reg_row[0] |= cpu_to_be32(b_ss(2));
> > + }
> > + assigned_row[0] = cpu_to_be32(reg_row[0] | b_n(1));
> > + assigned_row[3] = reg_row[3] = cpu_to_be32(d->io_regions[i].size
> > >> 32);
> > + assigned_row[4] = reg_row[4] = cpu_to_be32(d->io_regions[i].size);
> > + assigned_row[1] = cpu_to_be32(d->io_regions[i].addr >> 32);
> > + assigned_row[2] = cpu_to_be32(d->io_regions[i].addr);
>
> You don't appear to ever fill in reg_row[1] and reg_row[2].
>
> > + idx++;
> > + }
> > +
> > + *reg_size = (idx + 1) * RESOURCE_CELLS_TOTAL * sizeof(uint32_t);
> > + *assigned_size = idx * RESOURCE_CELLS_TOTAL * sizeof(uint32_t);
> > +}
> > +
> > +static int spapr_populate_pci_child_dt(PCIDevice *dev, void *fdt, int
> > offset,
> > + int phb_index, int drc_index)
> > +{
> > + int slot = PCI_SLOT(dev->devfn);
> > + char slotname[16];
> > + bool is_bridge = 1;
>
> Should use the true and false macros for a bool type, not 0 and 1.
>
> > + uint32_t reg[RESOURCE_CELLS_TOTAL * 8] = { 0 };
> > + uint32_t assigned[RESOURCE_CELLS_TOTAL * 8] = { 0 };
> > + int pci_status, reg_size, assigned_size;
> > +
> > + if (pci_default_read_config(dev, PCI_HEADER_TYPE, 1) ==
> > + PCI_HEADER_TYPE_NORMAL) {
> > + is_bridge = 0;
> > + }
> > +
> > + _FDT(fdt_setprop_cell(fdt, offset, "vendor-id",
> > + pci_default_read_config(dev, PCI_VENDOR_ID, 2)));
> > + _FDT(fdt_setprop_cell(fdt, offset, "device-id",
> > + pci_default_read_config(dev, PCI_DEVICE_ID, 2)));
> > + _FDT(fdt_setprop_cell(fdt, offset, "revision-id",
> > + pci_default_read_config(dev, PCI_REVISION_ID,
> > 1)));
> > + _FDT(fdt_setprop_cell(fdt, offset, "class-code",
> > + pci_default_read_config(dev, PCI_CLASS_DEVICE,
> > 2) << 8));
> > +
> > + _FDT(fdt_setprop_cell(fdt, offset, "interrupts",
> > + pci_default_read_config(dev, PCI_INTERRUPT_PIN,
> > 1)));
> > +
> > + /* if this device is NOT a bridge */
> > + if (!is_bridge) {
> > + _FDT(fdt_setprop_cell(fdt, offset, "min-grant",
> > + pci_default_read_config(dev, PCI_MIN_GNT, 1)));
> > + _FDT(fdt_setprop_cell(fdt, offset, "max-latency",
> > + pci_default_read_config(dev, PCI_MAX_LAT, 1)));
> > + _FDT(fdt_setprop_cell(fdt, offset, "subsystem-id",
> > + pci_default_read_config(dev, PCI_SUBSYSTEM_ID, 2)));
> > + _FDT(fdt_setprop_cell(fdt, offset, "subsystem-vendor-id",
> > + pci_default_read_config(dev, PCI_SUBSYSTEM_VENDOR_ID, 2)));
> > + }
> > +
> > + _FDT(fdt_setprop_cell(fdt, offset, "cache-line-size",
> > + pci_default_read_config(dev, PCI_CACHE_LINE_SIZE, 1)));
> > +
> > + /* the following fdt cells are masked off the pci status register */
> > + pci_status = pci_default_read_config(dev, PCI_STATUS, 2);
> > + _FDT(fdt_setprop_cell(fdt, offset, "devsel-speed",
> > + PCI_STATUS_DEVSEL_MASK & pci_status));
> > + _FDT(fdt_setprop_cell(fdt, offset, "fast-back-to-back",
> > + PCI_STATUS_FAST_BACK & pci_status));
> > + _FDT(fdt_setprop_cell(fdt, offset, "66mhz-capable",
> > + PCI_STATUS_66MHZ & pci_status));
> > + _FDT(fdt_setprop_cell(fdt, offset, "udf-supported",
> > + PCI_STATUS_UDF & pci_status));
>
> These aren't quite right. According to the OF PCI binding these are
> boolean properties encoded in the usual way, which is to say absent
> for false and present-but-empty for true. They shouldn't contain an
> actual value.
>
> > +
> > + _FDT(fdt_setprop_string(fdt, offset, "name", "pci"));
> > + sprintf(slotname, "Slot %d", slot + phb_index * PCI_SLOT_MAX);
> > + _FDT(fdt_setprop(fdt, offset, "ibm,loc-code", slotname,
> > strlen(slotname)));
> > + _FDT(fdt_setprop_cell(fdt, offset, "ibm,my-drc-index", drc_index));
> > +
> > + _FDT(fdt_setprop_cell(fdt, offset, "#address-cells",
> > + RESOURCE_CELLS_ADDRESS));
> > + _FDT(fdt_setprop_cell(fdt, offset, "#size-cells",
> > + RESOURCE_CELLS_SIZE));
> > + _FDT(fdt_setprop_cell(fdt, offset, "ibm,req#msi-x",
> > + RESOURCE_CELLS_SIZE));
> > + fill_resource_props(dev, phb_index, reg, ®_size,
> > + assigned, &assigned_size);
> > + _FDT(fdt_setprop(fdt, offset, "reg", reg, reg_size));
> > + _FDT(fdt_setprop(fdt, offset, "assigned-addresses",
> > + assigned, assigned_size));
> > +
> > + return 0;
> > +}
> > +
> > +/* create OF node for pci device and required OF DT properties */
> > +static void *spapr_create_pci_child_dt(sPAPRPHBState *phb, PCIDevice *dev,
> > + int drc_index, int *dt_offset)
> > +{
> > + void *fdt_orig, *fdt;
> > + int offset, ret;
> > + int slot = PCI_SLOT(dev->devfn);
> > + char nodename[512];
> > +
> > + fdt_orig = g_malloc0(FDT_MAX_SIZE);
> > + offset = fdt_create(fdt_orig, FDT_MAX_SIZE);
> > + fdt_begin_node(fdt_orig, "");
> > + fdt_end_node(fdt_orig);
> > + fdt_finish(fdt_orig);
>
> Recent versions of libfdt have an fdt_create_empty_tree() function to
> simplify that standard idiom.
Hmm, it doesn't seem to be in the source that qemu.git/dtc points to, so I'm
hesitant to rely on it. Would it be viable to get the QEMU submodule
updated to v1.4.0?
>
> > + fdt = g_malloc0(FDT_MAX_SIZE);
> > + fdt_open_into(fdt_orig, fdt, FDT_MAX_SIZE);
>
> There's no need for a second malloc here - fdt_open_into() may be used
> in place.
>
> > + sprintf(nodename, "address@hidden", slot);
> > + offset = fdt_add_subnode(fdt, 0, nodename);
> > + ret = spapr_populate_pci_child_dt(dev, fdt, offset, phb->index,
> > drc_index);
> > + g_assert(!ret);
> > + g_free(fdt_orig);
> > +
> > + *dt_offset = offset;
> > + return fdt;
> > +}
> > +
> > +static void spapr_device_hotplug_add(sPAPRDRConnector *drc,
> > + sPAPRPHBState *phb,
> > + PCIDevice *pdev)
> > +{
> > + sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
> > + DeviceState *dev = DEVICE(pdev);
> > + int drc_index = drck->get_index(drc);
> > + void *fdt = NULL;
> > + int fdt_start_offset = 0;
> > +
> > + /* boot-time devices get their device tree node created by SLOF, but
> > for
> > + * hotplugged devices we need QEMU to generate it so the guest can
> > fetch
> > + * it via RTAS
>
> Now that we have to have this code in qemu for the hotplug case we may
> want to consider using it for boot-time devices as well, and removing
> the corresponding code from SLOF, but that's a problem for another day.
Makes sense, since we do this for PHBs already. Can look into it as a follow-up.
>
> > + */
> > + if (dev->hotplugged) {
> > + fdt = spapr_create_pci_child_dt(phb, pdev, drc_index,
> > + &fdt_start_offset);
> > + }
> > + drck->attach(drc, DEVICE(pdev), fdt, fdt_start_offset,
> > !dev->hotplugged);
> > +}
> > +
> > +static void spapr_device_hotplug_remove_cb(DeviceState *dev, void *opaque)
> > +{
> > + object_unparent(OBJECT(dev));
> > +}
> > +
> > +static void spapr_device_hotplug_remove(sPAPRDRConnector *drc,
> > + sPAPRPHBState *phb,
> > + PCIDevice *pdev)
> > +{
> > + sPAPRDRConnectorClass *drck = SPAPR_DR_CONNECTOR_GET_CLASS(drc);
> > +
> > + drck->detach(drc, DEVICE(pdev), spapr_device_hotplug_remove_cb, phb);
> > +}
> > +
> > +static void spapr_phb_hot_plug(HotplugHandler *plug_handler,
> > + DeviceState *plugged_dev, Error **errp)
>
> So, this function is hotplugging a PCI device into an existing PHB,
> rather than hotplugging a PHB itself. Since the DR protocol does
> support both operations, I could see this name becoming confusing.
>
> > +{
> > + sPAPRPHBState *phb = SPAPR_PCI_HOST_BRIDGE(DEVICE(plug_handler));
> > + PCIDevice *pdev = PCI_DEVICE(plugged_dev);
> > + sPAPRDRConnector *drc =
> > + spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_PCI, pdev->devfn);
>
> Is it safe to call this before checking phb->dr_enabled?
It will be NULL if the DRC wasn't created, so the assertion below the check
should catch any misuse before it happens.
>
> > + /* if DR is disabled we don't need to do anything in the case of
> > + * hotplug or coldplug callbacks
> > + */
> > + if (!phb->dr_enabled) {
> > + /* if this is a hotplug operation initiated by the user
> > + * we need to let them know it's not enabled
> > + */
> > + if (plugged_dev->hotplugged) {
> > + error_set(errp, QERR_BUS_NO_HOTPLUG,
> > + object_get_typename(OBJECT(phb)));
> > + }
> > + return;
> > + }
> > +
> > + g_assert(drc);
> > + spapr_device_hotplug_add(drc, phb, pdev);
> > +}
> > +
> > +static void spapr_phb_hot_unplug(HotplugHandler *plug_handler,
> > + DeviceState *plugged_dev, Error **errp)
> > +{
> > + sPAPRPHBState *phb = SPAPR_PCI_HOST_BRIDGE(DEVICE(plug_handler));
> > + PCIDevice *pdev = PCI_DEVICE(plugged_dev);
> > + sPAPRDRConnector *drc =
> > + spapr_dr_connector_by_id(SPAPR_DR_CONNECTOR_TYPE_PCI, pdev->devfn);
> > +
> > + if (!phb->dr_enabled) {
> > + error_set(errp, QERR_BUS_NO_HOTPLUG,
> > + object_get_typename(OBJECT(phb)));
> > + return;
> > + }
> > +
> > + spapr_device_hotplug_remove(drc, phb, pdev);
> > +}
> > +
> > static void spapr_phb_realize(DeviceState *dev, Error **errp)
> > {
> > SysBusDevice *s = SYS_BUS_DEVICE(dev);
> > @@ -570,6 +811,7 @@ static void spapr_phb_realize(DeviceState *dev, Error
> > **errp)
> > &sphb->memspace, &sphb->iospace,
> > PCI_DEVFN(0, 0), PCI_NUM_PINS, TYPE_PCI_BUS);
> > phb->bus = bus;
> > + qbus_set_hotplug_handler(BUS(phb->bus), DEVICE(sphb), NULL);
> >
> > /*
> > * Initialize PHB address space.
> > @@ -806,6 +1048,7 @@ static void spapr_phb_class_init(ObjectClass *klass,
> > void *data)
> > PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
> > DeviceClass *dc = DEVICE_CLASS(klass);
> > sPAPRPHBClass *spc = SPAPR_PCI_HOST_BRIDGE_CLASS(klass);
> > + HotplugHandlerClass *hp = HOTPLUG_HANDLER_CLASS(klass);
> >
> > hc->root_bus_path = spapr_phb_root_bus_path;
> > dc->realize = spapr_phb_realize;
> > @@ -815,6 +1058,8 @@ static void spapr_phb_class_init(ObjectClass *klass,
> > void *data)
> > set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
> > dc->cannot_instantiate_with_device_add_yet = false;
> > spc->finish_realize = spapr_phb_finish_realize;
> > + hp->plug = spapr_phb_hot_plug;
> > + hp->unplug = spapr_phb_hot_unplug;
> > }
> >
> > static const TypeInfo spapr_phb_info = {
> > @@ -823,6 +1068,10 @@ static const TypeInfo spapr_phb_info = {
> > .instance_size = sizeof(sPAPRPHBState),
> > .class_init = spapr_phb_class_init,
> > .class_size = sizeof(sPAPRPHBClass),
> > + .interfaces = (InterfaceInfo[]) {
> > + { TYPE_HOTPLUG_HANDLER },
> > + { }
> > + }
> > };
> >
> > PCIHostState *spapr_create_phb(sPAPREnvironment *spapr, int index)
> > @@ -836,17 +1085,6 @@ PCIHostState *spapr_create_phb(sPAPREnvironment
> > *spapr, int index)
> > return PCI_HOST_BRIDGE(dev);
> > }
> >
> > -/* Macros to operate with address in OF binding to PCI */
> > -#define b_x(x, p, l) (((x) & ((1<<(l))-1)) << (p))
> > -#define b_n(x) b_x((x), 31, 1) /* 0 if relocatable */
> > -#define b_p(x) b_x((x), 30, 1) /* 1 if prefetchable */
> > -#define b_t(x) b_x((x), 29, 1) /* 1 if the address is aliased */
> > -#define b_ss(x) b_x((x), 24, 2) /* the space code */
> > -#define b_bbbbbbbb(x) b_x((x), 16, 8) /* bus number */
> > -#define b_ddddd(x) b_x((x), 11, 5) /* device number */
> > -#define b_fff(x) b_x((x), 8, 3) /* function number */
> > -#define b_rrrrrrrr(x) b_x((x), 0, 8) /* register number */
> > -
> > typedef struct sPAPRTCEDT {
> > void *fdt;
> > int node_off;
> > @@ -906,14 +1144,6 @@ int spapr_populate_pci_dt(sPAPRPHBState *phb,
> > return bus_off;
> > }
> >
> > -#define _FDT(exp) \
> > - do { \
> > - int ret = (exp); \
> > - if (ret < 0) { \
> > - return ret; \
> > - } \
> > - } while (0)
> > -
> > /* Write PHB properties */
> > _FDT(fdt_setprop_string(fdt, bus_off, "device_type", "pci"));
> > _FDT(fdt_setprop_string(fdt, bus_off, "compatible",
> > "IBM,Logical_PHB"));
>
> --
> David Gibson | I'll have my music baroque, and my code
> david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
> | _way_ _around_!
> http://www.ozlabs.org/~dgibson