[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2 02/10] ppc: Remove stub of PPC970 HID4 implementation
From: |
Greg Kurz |
Subject: |
Re: [PATCH v2 02/10] ppc: Remove stub of PPC970 HID4 implementation |
Date: |
Tue, 7 Jan 2020 18:36:38 +0100 |
On Tue, 7 Jan 2020 18:32:15 +0100
Greg Kurz <address@hidden> wrote:
> On Tue, 7 Jan 2020 15:48:19 +1100
> David Gibson <address@hidden> wrote:
>
> > The PowerPC 970 CPU was a cut-down POWER4, which had hypervisor capability.
> > However, it can be (and often was) strapped into "Apple mode", where the
> > hypervisor capabilities were disabled (essentially putting it always in
> > hypervisor mode).
Isn't it supervisor mode instead of hypervisor mode ?
> >
> > That's actually the only mode of the 970 we support in qemu, and we're
> > unlikely to change that any time soon. However, we do have a partial
> > implementation of the 970's HID4 register which affects things only
> > relevant for hypervisor mode.
> >
> > That stub is also really ugly, since it attempts to duplicate the effects
> > of HID4 by re-encoding it into the LPCR register used in newer CPUs, but
> > in a really confusing way.
> >
> > Just get rid of it.
> >
> > Signed-off-by: David Gibson <address@hidden>
> > ---
>
> Reviewed-by: Greg Kurz <address@hidden>
>
> > target/ppc/mmu-hash64.c | 28 +---------------------------
> > target/ppc/translate_init.inc.c | 17 ++++++-----------
> > 2 files changed, 7 insertions(+), 38 deletions(-)
> >
> > diff --git a/target/ppc/mmu-hash64.c b/target/ppc/mmu-hash64.c
> > index da8966ccf5..a881876647 100644
> > --- a/target/ppc/mmu-hash64.c
> > +++ b/target/ppc/mmu-hash64.c
> > @@ -1091,33 +1091,6 @@ void ppc_store_lpcr(PowerPCCPU *cpu, target_ulong
> > val)
> >
> > /* Filter out bits */
> > switch (env->mmu_model) {
> > - case POWERPC_MMU_64B: /* 970 */
> > - if (val & 0x40) {
> > - lpcr |= LPCR_LPES0;
> > - }
> > - if (val & 0x8000000000000000ull) {
> > - lpcr |= LPCR_LPES1;
> > - }
> > - if (val & 0x20) {
> > - lpcr |= (0x4ull << LPCR_RMLS_SHIFT);
> > - }
> > - if (val & 0x4000000000000000ull) {
> > - lpcr |= (0x2ull << LPCR_RMLS_SHIFT);
> > - }
> > - if (val & 0x2000000000000000ull) {
> > - lpcr |= (0x1ull << LPCR_RMLS_SHIFT);
> > - }
> > - env->spr[SPR_RMOR] = ((lpcr >> 41) & 0xffffull) << 26;
> > -
> > - /*
> > - * XXX We could also write LPID from HID4 here
> > - * but since we don't tag any translation on it
> > - * it doesn't actually matter
> > - *
> > - * XXX For proper emulation of 970 we also need
> > - * to dig HRMOR out of HID5
> > - */
> > - break;
> > case POWERPC_MMU_2_03: /* P5p */
> > lpcr = val & (LPCR_RMLS | LPCR_ILE |
> > LPCR_LPES0 | LPCR_LPES1 |
> > @@ -1154,6 +1127,7 @@ void ppc_store_lpcr(PowerPCCPU *cpu, target_ulong val)
> > }
> > break;
> > default:
> > + g_assert_not_reached();
> > ;
> > }
> > env->spr[SPR_LPCR] = lpcr;
> > diff --git a/target/ppc/translate_init.inc.c
> > b/target/ppc/translate_init.inc.c
> > index d33d65dff7..436d0d5a51 100644
> > --- a/target/ppc/translate_init.inc.c
> > +++ b/target/ppc/translate_init.inc.c
> > @@ -7884,25 +7884,20 @@ static void spr_write_lpcr(DisasContext *ctx, int
> > sprn, int gprn)
> > {
> > gen_helper_store_lpcr(cpu_env, cpu_gpr[gprn]);
> > }
> > -
> > -static void spr_write_970_hid4(DisasContext *ctx, int sprn, int gprn)
> > -{
> > -#if defined(TARGET_PPC64)
> > - spr_write_generic(ctx, sprn, gprn);
> > - gen_helper_store_lpcr(cpu_env, cpu_gpr[gprn]);
> > -#endif
> > -}
> > -
> > #endif /* !defined(CONFIG_USER_ONLY) */
> >
> > static void gen_spr_970_lpar(CPUPPCState *env)
> > {
> > #if !defined(CONFIG_USER_ONLY)
> > /* Logical partitionning */
> > - /* PPC970: HID4 is effectively the LPCR */
> > + /* PPC970: HID4 covers things later controlled by the LPCR and
> > + * RMOR in later CPUs, but with a different encoding. We only
> > + * support the 970 in "Apple mode" which has all hypervisor
> > + * facilities disabled by strapping, so we can basically just
> > + * ignore it */
> > spr_register(env, SPR_970_HID4, "HID4",
> > SPR_NOACCESS, SPR_NOACCESS,
> > - &spr_read_generic, &spr_write_970_hid4,
> > + &spr_read_generic, &spr_write_generic,
> > 0x00000000);
> > #endif
> > }
>
>
- Re: [PATCH v2 10/10] target/ppc: Only calculate RMLS derived RMA limit on demand, (continued)
Re: [PATCH v2 02/10] ppc: Remove stub of PPC970 HID4 implementation, Greg Kurz, 2020/01/08
[PATCH v2 01/10] ppc: Drop PPC_EMULATE_32BITS_HYPV stub, David Gibson, 2020/01/06