[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v8 23/24] hw/display/ati: allow compiling without PIXMAN
From: |
BALATON Zoltan |
Subject: |
Re: [PATCH v8 23/24] hw/display/ati: allow compiling without PIXMAN |
Date: |
Tue, 7 Nov 2023 09:46:10 +0100 (CET) |
On Tue, 7 Nov 2023, marcandre.lureau@redhat.com wrote:
From: Marc-André Lureau <marcandre.lureau@redhat.com>
Change the "x-pixman" property default value and use the fallback path
when PIXMAN support is disabled.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
---
hw/display/ati.c | 16 +++++++++++++++-
hw/display/ati_2d.c | 11 +++++++----
hw/display/meson.build | 2 +-
3 files changed, 23 insertions(+), 6 deletions(-)
diff --git a/hw/display/ati.c b/hw/display/ati.c
index 9a87a5504a..51a3b156ac 100644
--- a/hw/display/ati.c
+++ b/hw/display/ati.c
@@ -32,6 +32,13 @@
#define ATI_DEBUG_HW_CURSOR 0
+#ifdef CONFIG_PIXMAN
+#define DEFAULT_X_PIXMAN 3
+#else
+#define DEFAULT_X_PIXMAN 0
+#endif
+
+
Excess new line.
static const struct {
const char *name;
uint16_t dev_id;
@@ -946,6 +953,12 @@ static void ati_vga_realize(PCIDevice *dev, Error **errp)
ATIVGAState *s = ATI_VGA(dev);
VGACommonState *vga = &s->vga;
+#ifndef CONFIG_PIXMAN
+ if (s->use_pixman != 0) {
+ warn_report("x-pixman != 0, not effective without PIXMAN");
+ }
+#endif
+
if (s->model) {
int i;
for (i = 0; i < ARRAY_SIZE(ati_model_aliases); i++) {
@@ -1033,7 +1046,8 @@ static Property ati_vga_properties[] = {
DEFINE_PROP_UINT16("x-device-id", ATIVGAState, dev_id,
PCI_DEVICE_ID_ATI_RAGE128_PF),
DEFINE_PROP_BOOL("guest_hwcursor", ATIVGAState, cursor_guest_mode, false),
- DEFINE_PROP_UINT8("x-pixman", ATIVGAState, use_pixman, 3),
+ /* this a debug option, prefer PROP_UINT over PROP_BIT for simplicity */
Comment not needed but if you still want it, should be "this is a debug..."
+ DEFINE_PROP_UINT8("x-pixman", ATIVGAState, use_pixman, DEFAULT_X_PIXMAN),
DEFINE_PROP_END_OF_LIST()
};
diff --git a/hw/display/ati_2d.c b/hw/display/ati_2d.c
index 0e6b8e4367..e58acd0802 100644
--- a/hw/display/ati_2d.c
+++ b/hw/display/ati_2d.c
@@ -92,7 +92,7 @@ void ati_2d_blt(ATIVGAState *s)
switch (s->regs.dp_mix & GMC_ROP3_MASK) {
case ROP3_SRCCOPY:
{
- bool fallback = false;
+ bool fallback = true;
unsigned src_x = (s->regs.dp_cntl & DST_X_LEFT_TO_RIGHT ?
s->regs.src_x : s->regs.src_x + 1 - s->regs.dst_width);
unsigned src_y = (s->regs.dp_cntl & DST_Y_TOP_TO_BOTTOM ?
@@ -119,6 +119,7 @@ void ati_2d_blt(ATIVGAState *s)
src_stride /= sizeof(uint32_t);
dst_stride /= sizeof(uint32_t);
+#ifdef CONFIG_PIXMAN
DPRINTF("pixman_blt(%p, %p, %d, %d, %d, %d, %d, %d, %d, %d, %d, %d)\n",
src_bits, dst_bits, src_stride, dst_stride, bpp, bpp,
src_x, src_y, dst_x, dst_y,
Keep debug log even without pixman so move ifdef after it (also below) as
this provides info on the operation even if done by fallback.
@@ -147,9 +148,8 @@ void ati_2d_blt(ATIVGAState *s)
s->regs.dst_width, s->regs.dst_height);
}
g_free(tmp);
- } else {
- fallback = true;
}
If you cahnge default value to true this is not needed any more but for
consistency with sm501 you could keep default and put this outside of
#idfef instead so it's the same as sm501 or do the same there.
+#endif
if (fallback) {
unsigned int y, i, j, bypp = bpp / 8;
unsigned int src_pitch = src_stride * sizeof(uint32_t);
@@ -203,12 +203,15 @@ void ati_2d_blt(ATIVGAState *s)
}
dst_stride /= sizeof(uint32_t);
+#ifdef CONFIG_PIXMAN
DPRINTF("pixman_fill(%p, %d, %d, %d, %d, %d, %d, %x)\n",
dst_bits, dst_stride, bpp, dst_x, dst_y,
s->regs.dst_width, s->regs.dst_height, filler);
Move ifdef here.
With these
Acked-by: BALATON Zoltan <balaton@eik.bme.hu>
Thanks for doing this in last minute.
Regards,
BALATON Zoltan
if (!(s->use_pixman & BIT(0)) ||
!pixman_fill((uint32_t *)dst_bits, dst_stride, bpp, dst_x, dst_y,
- s->regs.dst_width, s->regs.dst_height, filler)) {
+ s->regs.dst_width, s->regs.dst_height, filler))
+#endif
+ {
/* fallback when pixman failed or we don't want to call it */
unsigned int x, y, i, bypp = bpp / 8;
unsigned int dst_pitch = dst_stride * sizeof(uint32_t);
diff --git a/hw/display/meson.build b/hw/display/meson.build
index 9c06aaee20..344dfe3d8c 100644
--- a/hw/display/meson.build
+++ b/hw/display/meson.build
@@ -62,7 +62,7 @@ system_ss.add(when: 'CONFIG_XLNX_DISPLAYPORT', if_true:
files('xlnx_dp.c'))
system_ss.add(when: 'CONFIG_ARTIST', if_true: files('artist.c'))
-system_ss.add(when: [pixman, 'CONFIG_ATI_VGA'], if_true: files('ati.c',
'ati_2d.c', 'ati_dbg.c'))
+system_ss.add(when: 'CONFIG_ATI_VGA', if_true: [files('ati.c', 'ati_2d.c',
'ati_dbg.c'), pixman])
if config_all_devices.has_key('CONFIG_VIRTIO_GPU')
- [PATCH v8 13/24] ui/console: when PIXMAN is unavailable, don't draw placeholder msg, (continued)
- [PATCH v8 13/24] ui/console: when PIXMAN is unavailable, don't draw placeholder msg, marcandre . lureau, 2023/11/07
- [PATCH v8 08/24] vl: move display early init before default devices, marcandre . lureau, 2023/11/07
- [PATCH v8 19/24] ui/dbus: do not require PIXMAN, marcandre . lureau, 2023/11/07
- [PATCH v8 20/24] arm/kconfig: XLNX_ZYNQMP_ARM depends on PIXMAN, marcandre . lureau, 2023/11/07
- [PATCH v8 21/24] hw/sm501: allow compiling without PIXMAN, marcandre . lureau, 2023/11/07
- [PATCH v8 22/24] hw/mips: FULOONG depends on VT82C686, marcandre . lureau, 2023/11/07
- [PATCH v8 24/24] build-sys: make pixman actually optional, marcandre . lureau, 2023/11/07
- [PATCH v8 23/24] hw/display/ati: allow compiling without PIXMAN, marcandre . lureau, 2023/11/07