hw/rx/rx-gdbsim.c | 4 ++--
hw/sparc/sun4m.c | 3 +--
28 files changed, 64 insertions(+), 105 deletions(-)
diff --git a/hw/acpi/cpu_hotplug.c b/hw/acpi/cpu_hotplug.c
index 634bbecb31..1338c037b5 100644
--- a/hw/acpi/cpu_hotplug.c
+++ b/hw/acpi/cpu_hotplug.c
@@ -12,6 +12,7 @@
#include "qemu/osdep.h"
#include "hw/acpi/cpu_hotplug.h"
#include "qapi/error.h"
+#include "hw/qdev-properties.h"
#include "hw/core/cpu.h"
#include "hw/i386/pc.h"
#include "hw/pci/pci.h"
@@ -41,8 +42,7 @@ static void cpu_status_write(void *opaque, hwaddr addr,
uint64_t data,
*/
if (addr == 0 && data == 0) {
AcpiCpuHotplug *cpus = opaque;
- object_property_set_bool(cpus->device, "cpu-hotplug-legacy", false,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(cpus->device), "cpu-hotplug-legacy", false);
}
}
@@ -66,8 +66,7 @@ static void acpi_set_cpu_present_bit(AcpiCpuHotplug *g, CPUState *cpu)
cpu_id = k->get_arch_id(cpu);
if ((cpu_id / 8) >= ACPI_GPE_PROC_LEN) {
- object_property_set_bool(g->device, "cpu-hotplug-legacy", false,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(g->device), "cpu-hotplug-legacy", false);
return;
}
diff --git a/hw/acpi/ich9.c b/hw/acpi/ich9.c
index 25e2c7243e..64b00673fe 100644
--- a/hw/acpi/ich9.c
+++ b/hw/acpi/ich9.c
@@ -30,6 +30,7 @@
#include "hw/pci/pci.h"
#include "migration/vmstate.h"
#include "qemu/timer.h"
+#include "hw/qdev-properties.h"
#include "hw/core/cpu.h"
#include "sysemu/reset.h"
#include "sysemu/runstate.h"
@@ -197,8 +198,7 @@ static bool vmstate_test_use_cpuhp(void *opaque)
static int vmstate_cpuhp_pre_load(void *opaque)
{
ICH9LPCPMRegs *s = opaque;
- Object *obj = OBJECT(s->gpe_cpu.device);
- object_property_set_bool(obj, "cpu-hotplug-legacy", false, &error_abort);
+ qdev_prop_set_bit(DEVICE(s->gpe_cpu.device), "cpu-hotplug-legacy", false);
return 0;
}
diff --git a/hw/acpi/piix4.c b/hw/acpi/piix4.c
index dd523d2e4c..215929ac6a 100644
--- a/hw/acpi/piix4.c
+++ b/hw/acpi/piix4.c
@@ -203,8 +203,8 @@ static bool vmstate_test_use_cpuhp(void *opaque)
static int vmstate_cpuhp_pre_load(void *opaque)
{
- Object *obj = OBJECT(opaque);
- object_property_set_bool(obj, "cpu-hotplug-legacy", false, &error_abort);
+ DeviceState *dev = DEVICE(opaque);
+ qdev_prop_set_bit(dev, "cpu-hotplug-legacy", false);
return 0;
}
diff --git a/hw/arm/armsse.c b/hw/arm/armsse.c
index 4672df180f..546b15e658 100644
--- a/hw/arm/armsse.c
+++ b/hw/arm/armsse.c
@@ -1022,8 +1022,7 @@ static void armsse_realize(DeviceState *dev, Error **errp)
* later if necessary.
*/
if (extract32(info->cpuwait_rst, i, 1)) {
- object_property_set_bool(cpuobj, "start-powered-off", true,
- &error_abort);
+ qdev_prop_set_bit(cpudev, "start-powered-off", true);
}
if (!s->cpu_fpu[i]) {
if (!object_property_set_bool(cpuobj, "vfp", false, errp)) {
diff --git a/hw/arm/armv7m.c b/hw/arm/armv7m.c
index cbaebe9bf8..3a6d72b0f3 100644
--- a/hw/arm/armv7m.c
+++ b/hw/arm/armv7m.c
@@ -328,8 +328,7 @@ static void armv7m_realize(DeviceState *dev, Error **errp)
return;
}
}
- object_property_set_bool(OBJECT(s->cpu), "start-powered-off",
- s->start_powered_off, &error_abort);
+ qdev_prop_set_bit(DEVICE(s->cpu), "start-powered-off",
s->start_powered_off);
/*
* Real M-profile hardware can be configured with a different number of
diff --git a/hw/arm/aspeed_ast2400.c b/hw/arm/aspeed_ast2400.c
index a4334c81b8..4a247bfcbb 100644
--- a/hw/arm/aspeed_ast2400.c
+++ b/hw/arm/aspeed_ast2400.c
@@ -420,8 +420,7 @@ static void aspeed_ast2400_soc_realize(DeviceState *dev,
Error **errp)
/* Net */
for (i = 0; i < sc->macs_num; i++) {
- object_property_set_bool(OBJECT(&s->ftgmac100[i]), "aspeed", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->ftgmac100[i]), "aspeed", true);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->ftgmac100[i]), errp)) {
return;
}
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index b965fbab5e..5ec8ad73cd 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -317,10 +317,8 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev,
Error **errp)
object_property_set_int(OBJECT(&a->cpu[i]), "cntfrq", 1125000000,
&error_abort);
- object_property_set_bool(OBJECT(&a->cpu[i]), "neon", false,
- &error_abort);
- object_property_set_bool(OBJECT(&a->cpu[i]), "vfp-d32", false,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(&a->cpu[i]), "neon", false);
+ qdev_prop_set_bit(DEVICE(&a->cpu[i]), "vfp-d32", false);
object_property_set_link(OBJECT(&a->cpu[i]), "memory",
OBJECT(s->memory), &error_abort);
@@ -500,8 +498,7 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, Error **errp)
/* Net */
for (i = 0; i < sc->macs_num; i++) {
- object_property_set_bool(OBJECT(&s->ftgmac100[i]), "aspeed", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->ftgmac100[i]), "aspeed", true);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->ftgmac100[i]), errp)) {
return;
}
diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 0233038b95..c07ca8817b 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -303,8 +303,7 @@ static void bcm2835_peripherals_realize(DeviceState *dev,
Error **errp)
&error_abort);
object_property_set_uint(OBJECT(&s->sdhci), "capareg",
BCM2835_SDHC_CAPAREG, &error_abort);
- object_property_set_bool(OBJECT(&s->sdhci), "pending-insert-quirk", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->sdhci), "pending-insert-quirk", true);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->sdhci), errp)) {
return;
}
diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
index b0674a22a6..1fdc3be6bb 100644
--- a/hw/arm/bcm2836.c
+++ b/hw/arm/bcm2836.c
@@ -135,8 +135,8 @@ static void bcm2836_realize(DeviceState *dev, Error **errp)
bc->peri_base, &error_abort);
/* start powered off if not enabled */
- object_property_set_bool(OBJECT(&s->cpu[n].core), "start-powered-off",
- n >= s->enabled_cpus, &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->cpu[n].core), "start-powered-off",
+ n >= s->enabled_cpus);
if (!qdev_realize(DEVICE(&s->cpu[n].core), NULL, errp)) {
return;
diff --git a/hw/arm/boot.c b/hw/arm/boot.c
index 84ea6a807a..ebed887e5e 100644
--- a/hw/arm/boot.c
+++ b/hw/arm/boot.c
@@ -12,6 +12,7 @@
#include "qemu/error-report.h"
#include "qapi/error.h"
#include <libfdt.h>
+#include "hw/qdev-properties.h"
#include "hw/arm/boot.h"
#include "hw/arm/linux-boot-if.h"
#include "sysemu/kvm.h"
@@ -1287,8 +1288,7 @@ void arm_load_kernel(ARMCPU *cpu, MachineState *ms,
struct arm_boot_info *info)
* CPU.
*/
if (cs != first_cpu) {
- object_property_set_bool(cpuobj, "start-powered-off", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(cpuobj), "start-powered-off", true);
}
}
}
diff --git a/hw/arm/fsl-imx25.c b/hw/arm/fsl-imx25.c
index 9aabbf7f58..fc6a7c8a8b 100644
--- a/hw/arm/fsl-imx25.c
+++ b/hw/arm/fsl-imx25.c
@@ -272,8 +272,7 @@ static void fsl_imx25_realize(DeviceState *dev, Error
**errp)
}
/* Watchdog */
- object_property_set_bool(OBJECT(&s->wdt), "pretimeout-support", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->wdt), "pretimeout-support", true);
sysbus_realize(SYS_BUS_DEVICE(&s->wdt), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt), 0, FSL_IMX25_WDT_ADDR);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->wdt), 0,
diff --git a/hw/arm/fsl-imx31.c b/hw/arm/fsl-imx31.c
index def27bb913..71f50ca802 100644
--- a/hw/arm/fsl-imx31.c
+++ b/hw/arm/fsl-imx31.c
@@ -171,8 +171,7 @@ static void fsl_imx31_realize(DeviceState *dev, Error
**errp)
{ FSL_IMX31_GPIO3_ADDR, FSL_IMX31_GPIO3_IRQ }
};
- object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", false,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->gpio[i]), "has-edge-sel", false);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) {
return;
}
diff --git a/hw/arm/fsl-imx6.c b/hw/arm/fsl-imx6.c
index 7dc42cbfe6..17c399a37e 100644
--- a/hw/arm/fsl-imx6.c
+++ b/hw/arm/fsl-imx6.c
@@ -128,8 +128,7 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
/* All CPU but CPU 0 start in power off mode */
if (i) {
- object_property_set_bool(OBJECT(&s->cpu[i]), "start-powered-off",
- true, &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->cpu[i]), "start-powered-off", true);
}
if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) {
@@ -288,10 +287,8 @@ static void fsl_imx6_realize(DeviceState *dev, Error
**errp)
},
};
- object_property_set_bool(OBJECT(&s->gpio[i]), "has-edge-sel", true,
- &error_abort);
- object_property_set_bool(OBJECT(&s->gpio[i]), "has-upper-pin-irq",
- true, &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->gpio[i]), "has-edge-sel", true);
+ qdev_prop_set_bit(DEVICE(&s->gpio[i]), "has-upper-pin-irq", true);
if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio[i]), errp)) {
return;
}
@@ -412,8 +409,7 @@ static void fsl_imx6_realize(DeviceState *dev, Error **errp)
FSL_IMX6_WDOG2_IRQ,
};
- object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support",
- true, &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->wdt[i]), "pretimeout-support", true);
sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX6_WDOGn_ADDR[i]);
diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c
index e37b69a5e1..4f4f2a6f41 100644
--- a/hw/arm/fsl-imx6ul.c
+++ b/hw/arm/fsl-imx6ul.c
@@ -410,8 +410,8 @@ static void fsl_imx6ul_realize(DeviceState *dev, Error
**errp)
* and we have to set all properties before calling sysbus_realize().
*/
for (i = 0; i < FSL_IMX6UL_NUM_ETHS; i++) {
- object_property_set_bool(OBJECT(&s->eth[i]), "phy-connected",
- s->phy_connected[i], &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->eth[i]), "phy-connected",
+ s->phy_connected[i]);
/*
* If the MDIO bus on this controller is not connected, assume the
* other controller provides support for it.
@@ -542,8 +542,8 @@ static void fsl_imx6ul_realize(DeviceState *dev, Error
**errp)
FSL_IMX6UL_WDOG3_IRQ,
};
- object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support",
- true, &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->wdt[i]), "pretimeout-support",
+ true);
sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0,
diff --git a/hw/arm/fsl-imx7.c b/hw/arm/fsl-imx7.c
index 474cfdc87c..3138ffeb08 100644
--- a/hw/arm/fsl-imx7.c
+++ b/hw/arm/fsl-imx7.c
@@ -192,8 +192,7 @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp)
* Secondary CPUs start in powered-down state (and can be
* powered up via the SRC system reset controller)
*/
- object_property_set_bool(o, "start-powered-off", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(o), "start-powered-off", true);
}
qdev_realize(DEVICE(o), NULL, &error_abort);
@@ -424,8 +423,8 @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp)
* and we have to set all properties before calling sysbus_realize().
*/
for (i = 0; i < FSL_IMX7_NUM_ETHS; i++) {
- object_property_set_bool(OBJECT(&s->eth[i]), "phy-connected",
- s->phy_connected[i], &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->eth[i]), "phy-connected",
+ s->phy_connected[i]);
/*
* If the MDIO bus on this controller is not connected, assume the
* other controller provides support for it.
@@ -513,8 +512,7 @@ static void fsl_imx7_realize(DeviceState *dev, Error **errp)
FSL_IMX7_WDOG4_IRQ,
};
- object_property_set_bool(OBJECT(&s->wdt[i]), "pretimeout-support",
- true, &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->wdt[i]), "pretimeout-support", true);
sysbus_realize(SYS_BUS_DEVICE(&s->wdt[i]), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->wdt[i]), 0, FSL_IMX7_WDOGn_ADDR[i]);
diff --git a/hw/arm/npcm7xx.c b/hw/arm/npcm7xx.c
index 15ff21d047..7022df3cfa 100644
--- a/hw/arm/npcm7xx.c
+++ b/hw/arm/npcm7xx.c
@@ -478,12 +478,10 @@ static void npcm7xx_realize(DeviceState *dev, Error
**errp)
&error_abort);
object_property_set_int(OBJECT(&s->cpu[i]), "reset-cbar",
NPCM7XX_GIC_CPU_IF_ADDR, &error_abort);
- object_property_set_bool(OBJECT(&s->cpu[i]), "reset-hivecs", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->cpu[i]), "reset-hivecs", true);
/* Disable security extensions. */
- object_property_set_bool(OBJECT(&s->cpu[i]), "has_el3", false,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->cpu[i]), "has_el3", false);
if (!qdev_realize(DEVICE(&s->cpu[i]), NULL, errp)) {
return;
@@ -613,8 +611,7 @@ static void npcm7xx_realize(DeviceState *dev, Error **errp)
}
/* USB Host */
- object_property_set_bool(OBJECT(&s->ehci), "companion-enable", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->ehci), "companion-enable", true);
sysbus_realize(SYS_BUS_DEVICE(&s->ehci), &error_abort);
sysbus_mmio_map(SYS_BUS_DEVICE(&s->ehci), 0, NPCM7XX_EHCI_BA);
sysbus_connect_irq(SYS_BUS_DEVICE(&s->ehci), 0,
diff --git a/hw/arm/xlnx-versal.c b/hw/arm/xlnx-versal.c
index 9600551c44..e3b730f5f5 100644
--- a/hw/arm/xlnx-versal.c
+++ b/hw/arm/xlnx-versal.c
@@ -48,8 +48,7 @@ static void versal_create_apu_cpus(Versal *s)
obj = OBJECT(&s->fpd.apu.cpu[i]);
if (i) {
/* Secondary CPUs start in powered-down state */
- object_property_set_bool(obj, "start-powered-off", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(obj), "start-powered-off", true);
}
object_property_set_int(obj, "core-count", ARRAY_SIZE(s->fpd.apu.cpu),
@@ -150,8 +149,7 @@ static void versal_create_rpu_cpus(Versal *s)
"rpu-cpu[*]", &s->lpd.rpu.cpu[i],
XLNX_VERSAL_RCPU_TYPE);
obj = OBJECT(&s->lpd.rpu.cpu[i]);
- object_property_set_bool(obj, "start-powered-off", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(obj), "start-powered-off", true);
object_property_set_int(obj, "mp-affinity", 0x100 | i, &error_abort);
object_property_set_int(obj, "core-count", ARRAY_SIZE(s->lpd.rpu.cpu),
@@ -536,8 +534,7 @@ static void versal_create_ospi(Versal *s, qemu_irq *pic)
&s->pmc.iou.ospi.dma_src,
TYPE_XLNX_CSU_DMA);
- object_property_set_bool(OBJECT(&s->pmc.iou.ospi.dma_src), "is-dst",
- false, &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->pmc.iou.ospi.dma_src), "is-dst", false);
object_property_set_link(OBJECT(&s->pmc.iou.ospi.dma_src),
"dma", OBJECT(mr_dac), &error_abort);
diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
index 5905a33015..f3ca3a7527 100644
--- a/hw/arm/xlnx-zynqmp.c
+++ b/hw/arm/xlnx-zynqmp.c
@@ -237,14 +237,12 @@ static void xlnx_zynqmp_create_rpu(MachineState *ms,
XlnxZynqMPState *s,
/*
* Secondary CPUs start in powered-down state.
*/
- object_property_set_bool(OBJECT(&s->rpu_cpu[i]),
- "start-powered-off", true, &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->rpu_cpu[i]), "start-powered-off",
true);
} else {
s->boot_cpu_ptr = &s->rpu_cpu[i];
}
- object_property_set_bool(OBJECT(&s->rpu_cpu[i]), "reset-hivecs", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->rpu_cpu[i]), "reset-hivecs", true);
if (!qdev_realize(DEVICE(&s->rpu_cpu[i]), NULL, errp)) {
return;
}
@@ -518,8 +516,7 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error
**errp)
/*
* Secondary CPUs start in powered-down state.
*/
- object_property_set_bool(OBJECT(&s->apu_cpu[i]),
- "start-powered-off", true, &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->apu_cpu[i]), "start-powered-off",
true);
} else {
s->boot_cpu_ptr = &s->apu_cpu[i];
}
diff --git a/hw/core/bus.c b/hw/core/bus.c
index c7831b5293..a24ebe5886 100644
--- a/hw/core/bus.c
+++ b/hw/core/bus.c
@@ -176,7 +176,7 @@ bool qbus_realize(BusState *bus, Error **errp)
void qbus_unrealize(BusState *bus)
{
- object_property_set_bool(OBJECT(bus), "realized", false, &error_abort);
+ qdev_prop_set_bit(DEVICE(bus), "realized", false);
}
static bool bus_get_realized(Object *obj, Error **errp)
diff --git a/hw/core/qdev.c b/hw/core/qdev.c
index 43d863b0c5..f4aa99ed77 100644
--- a/hw/core/qdev.c
+++ b/hw/core/qdev.c
@@ -303,7 +303,7 @@ bool qdev_realize_and_unref(DeviceState *dev, BusState
*bus, Error **errp)
void qdev_unrealize(DeviceState *dev)
{
- object_property_set_bool(OBJECT(dev), "realized", false, &error_abort);
+ qdev_prop_set_bit(dev, "realized", false);
}
static int qdev_assert_realized_properly_cb(Object *obj, void *opaque)
diff --git a/hw/i386/pc_piix.c b/hw/i386/pc_piix.c
index eace854335..6733652120 100644
--- a/hw/i386/pc_piix.c
+++ b/hw/i386/pc_piix.c
@@ -263,20 +263,13 @@ static void pc_init1(MachineState *machine,
size_t i;
pci_dev = pci_new_multifunction(-1, pcms->south_bridge);
- object_property_set_bool(OBJECT(pci_dev), "has-usb",
- machine_usb(machine), &error_abort);
- object_property_set_bool(OBJECT(pci_dev), "has-acpi",
- x86_machine_is_acpi_enabled(x86ms),
- &error_abort);
- object_property_set_bool(OBJECT(pci_dev), "has-pic", false,
- &error_abort);
- object_property_set_bool(OBJECT(pci_dev), "has-pit", false,
- &error_abort);
- qdev_prop_set_uint32(DEVICE(pci_dev), "smb_io_base", 0xb100);
- object_property_set_bool(OBJECT(pci_dev), "smm-enabled",
- x86_machine_is_smm_enabled(x86ms),
- &error_abort);
dev = DEVICE(pci_dev);
+ qdev_prop_set_bit(dev, "has-usb", machine_usb(machine));
+ qdev_prop_set_bit(dev, "has-acpi", x86_machine_is_acpi_enabled(x86ms));
+ qdev_prop_set_bit(dev, "has-pic", false);
+ qdev_prop_set_bit(dev, "has-pit", false);
+ qdev_prop_set_uint32(DEVICE(pci_dev), "smb_io_base", 0xb100);
+ qdev_prop_set_bit(dev, "smm-enabled",
x86_machine_is_smm_enabled(x86ms));
for (i = 0; i < ISA_NUM_IRQS; i++) {
qdev_connect_gpio_out_named(dev, "isa-irqs", i, x86ms->gsi[i]);
}
diff --git a/hw/microblaze/petalogix_ml605_mmu.c
b/hw/microblaze/petalogix_ml605_mmu.c
index fb7889cf67..626f9b0b56 100644
--- a/hw/microblaze/petalogix_ml605_mmu.c
+++ b/hw/microblaze/petalogix_ml605_mmu.c
@@ -88,9 +88,8 @@ petalogix_ml605_init(MachineState *machine)
* root instructions
*/
object_property_set_int(OBJECT(cpu), "use-fpu", 1, &error_abort);
- object_property_set_bool(OBJECT(cpu), "dcache-writeback", true,
- &error_abort);
- object_property_set_bool(OBJECT(cpu), "endianness", true, &error_abort);
+ qdev_prop_set_bit(DEVICE(cpu), "dcache-writeback", true);
+ qdev_prop_set_bit(DEVICE(cpu), "endianness", true);
qdev_realize(DEVICE(cpu), NULL, &error_abort);
/* Attach emulated BRAM through the LMB. */
diff --git a/hw/microblaze/xlnx-zynqmp-pmu.c b/hw/microblaze/xlnx-zynqmp-pmu.c
index 5a2016672a..19cc5efee3 100644
--- a/hw/microblaze/xlnx-zynqmp-pmu.c
+++ b/hw/microblaze/xlnx-zynqmp-pmu.c
@@ -18,6 +18,7 @@
#include "qemu/osdep.h"
#include "qapi/error.h"
#include "exec/address-spaces.h"
+#include "hw/qdev-properties.h"
#include "hw/boards.h"
#include "cpu.h"
#include "boot.h"
@@ -79,19 +80,14 @@ static void xlnx_zynqmp_pmu_soc_realize(DeviceState *dev,
Error **errp)
object_property_set_uint(OBJECT(&s->cpu), "base-vectors",
XLNX_ZYNQMP_PMU_ROM_ADDR, &error_abort);
- object_property_set_bool(OBJECT(&s->cpu), "use-stack-protection", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->cpu), "use-stack-protection", true);
object_property_set_uint(OBJECT(&s->cpu), "use-fpu", 0, &error_abort);
object_property_set_uint(OBJECT(&s->cpu), "use-hw-mul", 0, &error_abort);
- object_property_set_bool(OBJECT(&s->cpu), "use-barrel", true,
- &error_abort);
- object_property_set_bool(OBJECT(&s->cpu), "use-msr-instr", true,
- &error_abort);
- object_property_set_bool(OBJECT(&s->cpu), "use-pcmp-instr", true,
- &error_abort);
- object_property_set_bool(OBJECT(&s->cpu), "use-mmu", false, &error_abort);
- object_property_set_bool(OBJECT(&s->cpu), "endianness", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->cpu), "use-barrel", true);
+ qdev_prop_set_bit(DEVICE(&s->cpu), "use-msr-instr", true);
+ qdev_prop_set_bit(DEVICE(&s->cpu), "use-pcmp-instr", true);
+ qdev_prop_set_bit(DEVICE(&s->cpu), "use-mmu", false);
+ qdev_prop_set_bit(DEVICE(&s->cpu), "endianness", true);
object_property_set_str(OBJECT(&s->cpu), "version", "8.40.b",
&error_abort);
object_property_set_uint(OBJECT(&s->cpu), "pvr", 0, &error_abort);
diff --git a/hw/mips/cps.c b/hw/mips/cps.c
index 4f12e23ab5..ee2a8d5563 100644
--- a/hw/mips/cps.c
+++ b/hw/mips/cps.c
@@ -78,8 +78,7 @@ static void mips_cps_realize(DeviceState *dev, Error **errp)
CPUMIPSState *env = &cpu->env;
/* All VPs are halted on reset. Leave powering up to CPC. */
- object_property_set_bool(OBJECT(cpu), "start-powered-off", true,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(cpu), "start-powered-off", true);
/* All cores use the same clock tree */
qdev_connect_clock_in(DEVICE(cpu), "clk-in", s->clock);
diff --git a/hw/ppc/e500.c b/hw/ppc/e500.c
index 566f1200dd..a63d48c512 100644
--- a/hw/ppc/e500.c
+++ b/hw/ppc/e500.c
@@ -954,8 +954,7 @@ void ppce500_init(MachineState *machine)
* Secondary CPU starts in halted state for now. Needs to change
* when implementing non-kernel boot.
*/
- object_property_set_bool(OBJECT(cs), "start-powered-off", i != 0,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(cs), "start-powered-off", i != 0);
qdev_realize_and_unref(DEVICE(cs), NULL, &error_fatal);
if (!firstenv) {
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index 6760823e13..266cf6c9e6 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -2490,8 +2490,7 @@ static int spapr_switch_one_vga(DeviceState *dev, void
*opaque)
|| object_dynamic_cast(OBJECT(dev), "secondary-vga")
|| object_dynamic_cast(OBJECT(dev), "bochs-display")
|| object_dynamic_cast(OBJECT(dev), "virtio-vga")) {
- object_property_set_bool(OBJECT(dev), "big-endian-framebuffer", be,
- &error_abort);
+ qdev_prop_set_bit(dev, "big-endian-framebuffer", be);
}
return 0;
}
diff --git a/hw/rx/rx-gdbsim.c b/hw/rx/rx-gdbsim.c
index 47c17026c7..53d3d560c8 100644
--- a/hw/rx/rx-gdbsim.c
+++ b/hw/rx/rx-gdbsim.c
@@ -21,6 +21,7 @@
#include "qemu/error-report.h"
#include "qemu/guest-random.h"
#include "qapi/error.h"
+#include "hw/qdev-properties.h"
#include "hw/loader.h"
#include "hw/rx/rx62n.h"
#include "sysemu/qtest.h"
@@ -103,8 +104,7 @@ static void rx_gdbsim_init(MachineState *machine)
&error_abort);
object_property_set_uint(OBJECT(&s->mcu), "xtal-frequency-hz",
rxc->xtal_freq_hz, &error_abort);
- object_property_set_bool(OBJECT(&s->mcu), "load-kernel",
- kernel_filename != NULL, &error_abort);
+ qdev_prop_set_bit(DEVICE(&s->mcu), "load-kernel", kernel_filename != NULL);
if (!kernel_filename) {
if (machine->firmware) {
diff --git a/hw/sparc/sun4m.c b/hw/sparc/sun4m.c
index 64895aebe3..d631d555d8 100644
--- a/hw/sparc/sun4m.c
+++ b/hw/sparc/sun4m.c
@@ -803,8 +803,7 @@ static void cpu_devinit(const char *cpu_type, unsigned int
id,
env = &cpu->env;
qemu_register_reset(sun4m_cpu_reset, cpu);
- object_property_set_bool(OBJECT(cpu), "start-powered-off", id != 0,
- &error_abort);
+ qdev_prop_set_bit(DEVICE(cpu), "start-powered-off", id != 0);
qdev_realize_and_unref(DEVICE(cpu), NULL, &error_fatal);
cpu_sparc_set_id(env, id);
*cpu_irqs = qemu_allocate_irqs(cpu_set_irq, cpu, MAX_PILS);