Re: [PATCH V5 3/3] hw/riscv: virt: Enable booting S-mode firmware from pflash

[Alistair Francis]

On Tue, Oct 4, 2022 at 7:28 PM Sunil V L <sunilvl@ventanamicro.com> wrote:
>
> To boot S-mode firmware payload like EDK2 from persistent
> flash storage, qemu needs to pass the flash address as the
> next_addr in fw_dynamic_info to the opensbi.
>
> When both -kernel and -pflash options are provided in command line,
> the kernel (and initrd if -initrd) will be copied to fw_cfg table.
> The S-mode FW will load the kernel/initrd from fw_cfg table.
>
> If only pflash is given but not -kernel, then it is the job of
> of the S-mode firmware to locate and load the kernel.
>
> In either case, update the kernel_entry with the flash address
> so that the opensbi can jump to the entry point of the S-mode
> firmware.
>
> Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
> Reviewed-by: Andrew Jones <ajones@ventanamicro.com>

Reviewed-by: Alistair Francis <alistair.francis@wdc.com>

Alistair

> ---
>  hw/riscv/boot.c         | 29 +++++++++++++++++++++++++++++
>  hw/riscv/virt.c         | 18 +++++++++++++++++-
>  include/hw/riscv/boot.h |  1 +
>  3 files changed, 47 insertions(+), 1 deletion(-)
>
> diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
> index 1ae7596873..fa8ad27da2 100644
> --- a/hw/riscv/boot.c
> +++ b/hw/riscv/boot.c
> @@ -338,3 +338,32 @@ void riscv_setup_direct_kernel(hwaddr kernel_addr, 
> hwaddr fdt_addr)
>          riscv_cpu->env.fdt_addr = fdt_addr;
>      }
>  }
> +
> +void riscv_setup_firmware_boot(MachineState *machine)
> +{
> +    if (machine->kernel_filename) {
> +        FWCfgState *fw_cfg;
> +        fw_cfg = fw_cfg_find();
> +
> +        assert(fw_cfg);
> +        /*
> +         * Expose the kernel, the command line, and the initrd in fw_cfg.
> +         * We don't process them here at all, it's all left to the
> +         * firmware.
> +         */
> +        load_image_to_fw_cfg(fw_cfg,
> +                             FW_CFG_KERNEL_SIZE, FW_CFG_KERNEL_DATA,
> +                             machine->kernel_filename,
> +                             true);
> +        load_image_to_fw_cfg(fw_cfg,
> +                             FW_CFG_INITRD_SIZE, FW_CFG_INITRD_DATA,
> +                             machine->initrd_filename, false);
> +
> +        if (machine->kernel_cmdline) {
> +            fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
> +                           strlen(machine->kernel_cmdline) + 1);
> +            fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA,
> +                              machine->kernel_cmdline);
> +        }
> +    }
> +}
> diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
> index de2efccebf..a5bc7353b4 100644
> --- a/hw/riscv/virt.c
> +++ b/hw/riscv/virt.c
> @@ -1274,7 +1274,23 @@ static void virt_machine_done(Notifier *notifier, void 
> *data)
>      s->fw_cfg = create_fw_cfg(machine);
>      rom_set_fw(s->fw_cfg);
>
> -    if (machine->kernel_filename) {
> +    if (drive_get(IF_PFLASH, 0, 1)) {
> +        /*
> +         * S-mode FW like EDK2 will be kept in second plash (unit 1).
> +         * When both kernel, initrd and pflash options are provided in the
> +         * command line, the kernel and initrd will be copied to the fw_cfg
> +         * table and opensbi will jump to the flash address which is the
> +         * entry point of S-mode FW. It is the job of the S-mode FW to load
> +         * the kernel and initrd using fw_cfg table.
> +         *
> +         * If only pflash is given but not -kernel, then it is the job of
> +         * of the S-mode firmware to locate and load the kernel.
> +         * In either case, the next_addr for opensbi will be the flash 
> address.
> +         */
> +        riscv_setup_firmware_boot(machine);
> +        kernel_entry = virt_memmap[VIRT_FLASH].base +
> +                       virt_memmap[VIRT_FLASH].size / 2;
> +    } else if (machine->kernel_filename) {
>          kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc[0],
>                                                           firmware_end_addr);
>
> diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
> index a36f7618f5..93e5f8760d 100644
> --- a/include/hw/riscv/boot.h
> +++ b/include/hw/riscv/boot.h
> @@ -57,5 +57,6 @@ void riscv_rom_copy_firmware_info(MachineState *machine, 
> hwaddr rom_base,
>                                    uint32_t reset_vec_size,
>                                    uint64_t kernel_entry);
>  void riscv_setup_direct_kernel(hwaddr kernel_addr, hwaddr fdt_addr);
> +void riscv_setup_firmware_boot(MachineState *machine);
>
>  #endif /* RISCV_BOOT_H */
> --
> 2.25.1
>
>