Re: [PATCH v12 2/7] s390x/cpu topology: reporting the CPU topology to the guest

[Janis Schoetterl-Glausch]

On Tue, 2022-11-29 at 18:42 +0100, Pierre Morel wrote:
> The guest uses the STSI instruction to get information on the
> CPU topology.
> 
> Let us implement the STSI instruction for the basis CPU topology
> level, level 2.
> 
> Signed-off-by: Pierre Morel <pmorel@linux.ibm.com>
> ---
>  target/s390x/cpu.h          |  77 +++++++++++++++
>  hw/s390x/s390-virtio-ccw.c  |  12 +--
>  target/s390x/cpu_topology.c | 186 ++++++++++++++++++++++++++++++++++++
>  target/s390x/kvm/kvm.c      |   6 +-
>  target/s390x/meson.build    |   1 +
>  5 files changed, 274 insertions(+), 8 deletions(-)
>  create mode 100644 target/s390x/cpu_topology.c
> 
> diff --git a/target/s390x/cpu.h b/target/s390x/cpu.h
> index 7d6d01325b..dd878ac916 100644
> --- a/target/s390x/cpu.h
> +++ b/target/s390x/cpu.h
> 
[...]

> +/* Configuration topology */
> +typedef struct SysIB_151x {
> +    uint8_t  reserved0[2];
> +    uint16_t length;
> +    uint8_t  mag[S390_TOPOLOGY_MAG];
> +    uint8_t  reserved1;
> +    uint8_t  mnest;
> +    uint32_t reserved2;
> +    char tle[0];

AFAIK [] is preferred over [0].

> +} QEMU_PACKED QEMU_ALIGNED(8) SysIB_151x;
> +QEMU_BUILD_BUG_ON(sizeof(SysIB_151x) != 16);

[...]
> 
> +/*
> + * s390_topology_add_cpu:
> + * @topo: pointer to the topology
> + * @cpu : pointer to the new CPU
> + *
> + * The topology pointed by S390CPU, gives us the CPU topology
> + * established by the -smp QEMU aruments.
> + * The core-id is used to calculate the position of the CPU inside
> + * the topology:
> + *  - the socket, container TLE, containing the CPU, we have one socket
> + *    for every num_cores cores.
> + *  - the CPU TLE inside the socket, we have potentionly up to 4 CPU TLE
> + *    in a container TLE with the assumption that all CPU are identical
> + *    with the same polarity and entitlement because we have maximum 256
> + *    CPUs and each TLE can hold up to 64 identical CPUs.
> + *  - the bit in the 64 bit CPU TLE core mask
> + */
> +static void s390_topology_add_cpu(S390Topology *topo, S390CPU *cpu)
> +{
> +    int core_id = cpu->env.core_id;
> +    int bit, origin;
> +    int socket_id;
> +
> +    cpu->machine_data = topo;
> +    socket_id = core_id / topo->num_cores;
> +    /*
> +     * At the core level, each CPU is represented by a bit in a 64bit
> +     * uint64_t which represent the presence of a CPU.
> +     * The firmware assume that all CPU in a CPU TLE have the same
> +     * type, polarization and are all dedicated or shared.
> +     * In that case the origin variable represents the offset of the first
> +     * CPU in the CPU container.
> +     * More than 64 CPUs per socket are represented in several CPU containers
> +     * inside the socket container.
> +     * The only reason to have several S390TopologyCores inside a socket is
> +     * to have more than 64 CPUs.
> +     * In that case the origin variable represents the offset of the first 
> CPU
> +     * in the CPU container. More than 64 CPUs per socket are represented in
> +     * several CPU containers inside the socket container.
> +     */

This comment still contains redundant sentences.
Did you have a look at my suggestion in v10 patch 1?

> +    bit = core_id;
> +    origin = bit / 64;
> +    bit %= 64;
> +    bit = 63 - bit;
> +
> +    topo->socket[socket_id].active_count++;
> +    set_bit(bit, &topo->socket[socket_id].mask[origin]);
> +}
> +
> +/*
> + * s390_prepare_topology:
> + * @s390ms : pointer to the S390CcwMachite State
> + *
> + * Calls s390_topology_add_cpu to organize the topology
> + * inside the topology device before writing the SYSIB.
> + *
> + * The topology is currently fixed on boot and do not change

does not change

> + * even on migration.
> + */
> +static void s390_prepare_topology(S390CcwMachineState *s390ms)
> +{
> +    const MachineState *ms = MACHINE(s390ms);
> +    static bool done;
> +    int i;
> +
> +    if (done) {
> +        return;
> +    }
> +
> +    for (i = 0; i < ms->possible_cpus->len; i++) {
> +        if (ms->possible_cpus->cpus[i].cpu) {
> +            s390_topology_add_cpu(S390_CPU_TOPOLOGY(s390ms->topology),
> +                                  S390_CPU(ms->possible_cpus->cpus[i].cpu));
> +        }
> +    }
> +
> +    done = true;
> +}
> +
> 
[...]