qemu-stable
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH for 7.2?] vhost: fix vq dirt bitmap syncing when vIOMMU is en


From: Jason Wang
Subject: Re: [PATCH for 7.2?] vhost: fix vq dirt bitmap syncing when vIOMMU is enabled
Date: Thu, 24 Nov 2022 15:31:59 +0800

On Thu, Nov 24, 2022 at 3:06 PM Michael S. Tsirkin <mst@redhat.com> wrote:
>
> On Thu, Nov 24, 2022 at 12:12:15PM +0800, Jason Wang wrote:
> > On Wed, Nov 23, 2022 at 3:21 PM Michael S. Tsirkin <mst@redhat.com> wrote:
> > >
> > > On Wed, Nov 23, 2022 at 03:08:25PM +0800, Jason Wang wrote:
> > > > On Wed, Nov 23, 2022 at 2:15 PM Michael S. Tsirkin <mst@redhat.com> 
> > > > wrote:
> > > > >
> > > > > On Wed, Nov 23, 2022 at 01:47:04PM +0800, Jason Wang wrote:
> > > > > > On Wed, Nov 23, 2022 at 1:26 PM Jason Wang <jasowang@redhat.com> 
> > > > > > wrote:
> > > > > > >
> > > > > > > On Wed, Nov 23, 2022 at 12:28 AM Eric Auger 
> > > > > > > <eric.auger@redhat.com> wrote:
> > > > > > > >
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > On 11/22/22 10:43, Michael S. Tsirkin wrote:
> > > > > > > > > On Tue, Nov 22, 2022 at 11:01:11AM +0800, Jason Wang wrote:
> > > > > > > > >> When vIOMMU is enabled, the vq->used_phys is actually the 
> > > > > > > > >> IOVA not
> > > > > > > > >> GPA. So we need to translate it to GPA before the syncing 
> > > > > > > > >> otherwise we
> > > > > > > > >> may hit the following crash since IOVA could be out of the 
> > > > > > > > >> scope of
> > > > > > > > >> the GPA log size. This could be noted when using 
> > > > > > > > >> virtio-IOMMU with
> > > > > > > > >> vhost using 1G memory.
> > > > > > > > > Noted how exactly? What does "using 1G memory" mean?
> > > > > > > >
> > > > > > > > We hit the following assertion:
> > > > > > > >
> > > > > > > > qemu-system-x86_64: ../hw/virtio/vhost.c:85: 
> > > > > > > > vhost_dev_sync_region: Assertion `end / VHOST_LOG_CHUNK < 
> > > > > > > > dev->log_size' failed.
> > > > > > > >
> > > > > > > > On the last time vhost_get_log_size() is called it takes into 
> > > > > > > > account 2 regions when computing the log_size:
> > > > > > > > qemu-system-x86_64: vhost_get_log_size region 0 last=0x9ffff 
> > > > > > > > updated log_size=0x3
> > > > > > > > qemu-system-x86_64: vhost_get_log_size region 1 last=0x3fffffff 
> > > > > > > > updated log_size=0x1000
> > > > > > > > so in vhost_migration_log() vhost_get_log_size(dev) returns 
> > > > > > > > 0x1000
> > > > > > > >
> > > > > > > > In the test case, memory_region_sync_dirty_bitmap() gets called 
> > > > > > > > for mem-machine_mem, vga.vram (several times) and eventually on 
> > > > > > > > pc.bios. This latter is reponsible for the assertion:
> > > > > > > >
> > > > > > > > qemu-system-x86_64: vhost_log_sync calls sync_dirty_map on 
> > > > > > > > pc.bios for the full range
> > > > > > > > qemu-system-x86_64: vhost_sync_dirty_bitmap calls 
> > > > > > > > vhost_dev_sync_region on region 0
> > > > > > > > qemu-system-x86_64: vhost_dev_sync_region end=0x9ffff < 
> > > > > > > > start=0xfffc0000
> > > > > > > > qemu-system-x86_64: vhost_sync_dirty_bitmap calls 
> > > > > > > > vhost_dev_sync_region on region 1
> > > > > > > > qemu-system-x86_64: vhost_dev_sync_region end=0x3fffffff < 
> > > > > > > > start=0xfffc0000
> > > > > > > > qemu-system-x86_64: vhost_sync_dirty_bitmap calls 
> > > > > > > > vhost_dev_sync_region on vq 0 <-----
> > > > > > > > qemu-system-x86_64: vhost_dev_sync_region pc.bios 
> > > > > > > > mfirst=0xfffc0000 mlast=0xffffffff rfirst=0xfffff240 
> > > > > > > > rlast=0xfffffa45
> > > > > > > > qemu-system-x86_64: vhost_dev_sync_region pc.bios 
> > > > > > > > end=0xfffffa45 VHOST_LOG_CHUNK=0x40000 
> > > > > > > > end/VHOST_LOG_CHUNK=0x3fff dev->log_size=0x1000
> > > > > > > > qemu-system-x86_64: ../hw/virtio/vhost.c:85: 
> > > > > > > > vhost_dev_sync_region: Assertion `end / VHOST_LOG_CHUNK < 
> > > > > > > > dev->log_size' failed.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > "using 1G memory": We hit the issue with a guest started with 
> > > > > > > > 1GB initial RAM.
> > > > > > >
> > > > > > > Yes, so in the case the guest iova allocator may try to use an 
> > > > > > > IOVA
> > > > > > > that is beyond 1G.
> > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > >
> > > > > > > > >> Fixes: c471ad0e9bd46 ("vhost_net: device IOTLB support")
> > > > > > > > >> Cc: qemu-stable@nongnu.org
> > > > > > > > >> Reported-by: Yalan Zhang <yalzhang@redhat.com>
> > > > > > > > >> Tested-by: Eric Auger <eric.auger@redhat.com>
> > > > > > > > >> Tested-by: Lei Yang <leiyang@redhat.com>
> > > > > > > > >> Signed-off-by: Jason Wang <jasowang@redhat.com>
> > > > > > > > >> ---
> > > > > > > > >>  hw/virtio/vhost.c | 65 
> > > > > > > > >> ++++++++++++++++++++++++++++++++---------------
> > > > > > > > >>  1 file changed, 45 insertions(+), 20 deletions(-)
> > > > > > > > >>
> > > > > > > > >> diff --git a/hw/virtio/vhost.c b/hw/virtio/vhost.c
> > > > > > > > >> index d1c4c20b8c..26b319f34e 100644
> > > > > > > > >> --- a/hw/virtio/vhost.c
> > > > > > > > >> +++ b/hw/virtio/vhost.c
> > > > > > > > >> @@ -106,11 +106,30 @@ static void 
> > > > > > > > >> vhost_dev_sync_region(struct vhost_dev *dev,
> > > > > > > > >>      }
> > > > > > > > >>  }
> > > > > > > > >>
> > > > > > > > >> +static bool vhost_dev_has_iommu(struct vhost_dev *dev)
> > > > > > > > >> +{
> > > > > > > > >> +    VirtIODevice *vdev = dev->vdev;
> > > > > > > > >> +
> > > > > > > > >> +    /*
> > > > > > > > >> +     * For vhost, VIRTIO_F_IOMMU_PLATFORM means the backend 
> > > > > > > > >> support
> > > > > > > > >> +     * incremental memory mapping API via IOTLB API. For 
> > > > > > > > >> platform that
> > > > > > > > >> +     * does not have IOMMU, there's no need to enable this 
> > > > > > > > >> feature
> > > > > > > > >> +     * which may cause unnecessary IOTLB miss/update 
> > > > > > > > >> transactions.
> > > > > > > > >> +     */
> > > > > > > > >> +    if (vdev) {
> > > > > > > > >> +        return virtio_bus_device_iommu_enabled(vdev) &&
> > > > > > > > >> +            virtio_host_has_feature(vdev, 
> > > > > > > > >> VIRTIO_F_IOMMU_PLATFORM);
> > > > > > > > >> +    } else {
> > > > > > > > >> +        return false;
> > > > > > > > >> +    }
> > > > > > > > >> +}
> > > > > > > > >> +
> > > > > > > > >>  static int vhost_sync_dirty_bitmap(struct vhost_dev *dev,
> > > > > > > > >>                                     MemoryRegionSection 
> > > > > > > > >> *section,
> > > > > > > > >>                                     hwaddr first,
> > > > > > > > >>                                     hwaddr last)
> > > > > > > > >>  {
> > > > > > > > >> +    IOMMUTLBEntry iotlb;
> > > > > > > > > why don't we move this inside the scope where it's used?
> > > > > > >
> > > > > > > That's fine.
> > > > > > >
> > > > > > > > >
> > > > > > > > >>      int i;
> > > > > > > > >>      hwaddr start_addr;
> > > > > > > > >>      hwaddr end_addr;
> > > > > > > > >> @@ -132,13 +151,37 @@ static int 
> > > > > > > > >> vhost_sync_dirty_bitmap(struct vhost_dev *dev,
> > > > > > > > >>      }
> > > > > > > > >>      for (i = 0; i < dev->nvqs; ++i) {
> > > > > > > > >>          struct vhost_virtqueue *vq = dev->vqs + i;
> > > > > > > > >> +        hwaddr used_phys = vq->used_phys, used_size = 
> > > > > > > > >> vq->used_size;
> > > > > > > > >> +        hwaddr phys, s;
> > > > > > > > > these two, too.
> > > > > > >
> > > > > > > Right.
> > > > > > >
> > > > > > > > >
> > > > > > > > >>
> > > > > > > > >>          if (!vq->used_phys && !vq->used_size) {
> > > > > > > > >>              continue;
> > > > > > > > >>          }
> > > > > > > > >>
> > > > > > > > >> -        vhost_dev_sync_region(dev, section, start_addr, 
> > > > > > > > >> end_addr, vq->used_phys,
> > > > > > > > >> -                              range_get_last(vq->used_phys, 
> > > > > > > > >> vq->used_size));
> > > > > > > > >> +        if (vhost_dev_has_iommu(dev)) {
> > > > > > > > >> +            while (used_size) {
> > > > > > > > >> +                rcu_read_lock();
> > > > > > > > >> +                iotlb = 
> > > > > > > > >> address_space_get_iotlb_entry(dev->vdev->dma_as,
> > > > > > > > >> +                                                      
> > > > > > > > >> used_phys,
> > > > > > > > >> +                                                      true, 
> > > > > > > > >> MEMTXATTRS_UNSPECIFIED);
> > > > > > > > >> +                rcu_read_unlock();
> > > > > > > > >> +
> > > > > > > > >> +                if (iotlb.target_as == NULL) {
> > > > > > > > >> +                    return -EINVAL;
> > > > > > > > > I am not sure how this can trigger. I don't like == NULL:
> > > > > > > > > !iotlb.target_as is more succint. But a bigger question is 
> > > > > > > > > how to
> > > > > > > > > handle this. callers ignore the return value so maybe
> > > > > > > > > log guest error? iommu seems misconfigured ...
> > > > > > >
> > > > > > > Ok.
> > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >> +                }
> > > > > > > > >> +
> > > > > > > > >> +                phys = iotlb.translated_addr;
> > > > > > > > >> +                s = MIN(iotlb.addr_mask + 1, used_size);
> > > > > > > > > Note, that iotlb.translated_addr here is an aligned address 
> > > > > > > > > and
> > > > > > > > > iotlb.addr_mask + 1 is size from there.
> > > > > > > > >
> > > > > > > > > So I think phys that you want is actually
> > > > > > > > >       phys = iotlb.translated_addr + (used_phys & 
> > > > > > > > > iotlb.addr_mask);
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > accordingly, the size would be from there until end of mask:
> > > > > > > > >       s = MIN(iotlb.addr_mask + 1 - (used_phys & 
> > > > > > > > > iotlb.addr_mask), used_size);
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Also, it bothers me that the math here will give you 0 if 
> > > > > > > > > addr_mask is
> > > > > > > > > all ones.
> > > > > >
> > > > > > So even if addr_mask is all ones, we end up with s = MIN(1, 
> > > > > > used_size)
> > > > > > which should be fine.
> > > > >
> > > > > How do you figure? addr_mask is all ones, addr_mask + 1 is 0, we get 
> > > > > MIN(0, used_size).
> > > >
> > > > But we have a substration after that.
> > >
> > >
> > > I don't get it. This is your code:
> > >                s = MIN(iotlb.addr_mask + 1, used_size);
> > >
> > > if addr_mask is all ones s becomes 0. Then while loop will loop forever.
> >
> > Ok, I think there's some misunderstanding here. I meant using:
> >
> > s = MIN(iotlb.addr_mask + 1 - (used_phys & iotlb.addr_mask), used_size);
> >
> > Won't result in a zero for s.
>
> If used_phys is page aligned then I think it will.

So iotlb.addr_mask + 1 is zero, used_phys & iotlb.addr_mask is used_phys:

# cat t.c
#include <stdio.h>

int main(void)
{
unsigned int mask = 0xFFFFFFFF;
unsigned long long used_phys = 0x1000;
unsigned long long s = mask + 1 - (used_phys & mask);

fprintf(stderr, "result is %llx\n", s);

return 0;
}
# gcc t.c
# ./a.out
result is fffffffffffff000

>
> > So there's no need to move the plus one
> > outside the MIN.
> >
> > Thanks
>
> I mean why don't you try?

There should be some misunderstanding. I fully understand the
MIN(mask+1, used_size) case. My comments were for

MIN(iotlb.addr_mask + 1 - (used_phys & iotlb.addr_mask), used_size);

And used_phys can't be zero here.

Thanks

>
> [mst@tuck ~]$ cat > a.c
> #include <stdio.h>
> #define  MIN(a,b) (a<b ? a : b)
>
> int main(int argc, char **argv)
> {
>    unsigned mask = 0xffffffff;
>    unsigned s = MIN(mask + 1, 100);
>    printf("s=0x%x\n",s);
> }
> [mst@tuck ~]$ gcc a.c
> [mst@tuck ~]$ ./a.out
> s=0x0
> [mst@tuck ~]$
>
>
>
>
>
>
> > >
> > > > In order to get a zero result,
> > > > used_phys must be zero then used_phys & iotlb.addr_mask can be zero,
> > > > or anything I missed here?
> > > >
> > > > The 1 is calculated via assuming used_phys are all ones.
> > > >
> > > > Thanks
> > >
> > > Not used_phys, I'm talking about addr_mask being all ones.
> > >
> > >
> > > >
> > > > >
> > > > > > The used_size has been validated before to be
> > > > > > non-zero.
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > > > Then MIN will give 0 too and we loop forever.  I think this
> > > > > > > > > can not trigger, but I'd rather we play it safe and add 
> > > > > > > > > outside of MIN
> > > > > > > > > after it's capped to a reasonable value. So we end up with:
> > > > > > > > >
> > > > > > > > >       /* Distance from start of used ring until last byte of 
> > > > > > > > > IOMMU page */
> > > > > > > > >       s = iotlb.addr_mask - (used_phys & iotlb.addr_mask);
> > > > > > > > >       /* size of used ring, or of the part of it until end of 
> > > > > > > > > IOMMU page */
> > > > > > > > >       s = MIN(s, used_size - 1) + 1;
> > > > > > > > >
> > > > > > > > >
> > > > > > >
> > > > > > > Right.
> > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >> +
> > > > > > > > >> +                vhost_dev_sync_region(dev, section, 
> > > > > > > > >> start_addr, end_addr, phys,
> > > > > > > > >> +                                      range_get_last(phys, 
> > > > > > > > >> used_size));
> > > > > > > > > why are you syncing used_size here? Shouldn't it be s?
> > > > > > >
> > > > > > > Let me fix this.
> > > > > > >
> > > > > > > Thanks
> > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >> +                used_size -= s;
> > > > > > > > >> +                used_phys += s;
> > > > > > > > >> +            }
> > > > > > > > >> +        } else {
> > > > > > > > >> +            vhost_dev_sync_region(dev, section, start_addr, 
> > > > > > > > >> end_addr, used_phys,
> > > > > > > > >> +                                  range_get_last(used_phys, 
> > > > > > > > >> used_size));
> > > > > > > > >> +        }
> > > > > > > > >>      }
> > > > > > > > >>      return 0;
> > > > > > > > >>  }
> > > > > > > > >> @@ -306,24 +349,6 @@ static inline void 
> > > > > > > > >> vhost_dev_log_resize(struct vhost_dev *dev, uint64_t size)
> > > > > > > > >>      dev->log_size = size;
> > > > > > > > >>  }
> > > > > > > > >>
> > > > > > > > >> -static bool vhost_dev_has_iommu(struct vhost_dev *dev)
> > > > > > > > >> -{
> > > > > > > > >> -    VirtIODevice *vdev = dev->vdev;
> > > > > > > > >> -
> > > > > > > > >> -    /*
> > > > > > > > >> -     * For vhost, VIRTIO_F_IOMMU_PLATFORM means the backend 
> > > > > > > > >> support
> > > > > > > > >> -     * incremental memory mapping API via IOTLB API. For 
> > > > > > > > >> platform that
> > > > > > > > >> -     * does not have IOMMU, there's no need to enable this 
> > > > > > > > >> feature
> > > > > > > > >> -     * which may cause unnecessary IOTLB miss/update 
> > > > > > > > >> transactions.
> > > > > > > > >> -     */
> > > > > > > > >> -    if (vdev) {
> > > > > > > > >> -        return virtio_bus_device_iommu_enabled(vdev) &&
> > > > > > > > >> -            virtio_host_has_feature(vdev, 
> > > > > > > > >> VIRTIO_F_IOMMU_PLATFORM);
> > > > > > > > >> -    } else {
> > > > > > > > >> -        return false;
> > > > > > > > >> -    }
> > > > > > > > >> -}
> > > > > > > > >> -
> > > > > > > > >>  static void *vhost_memory_map(struct vhost_dev *dev, hwaddr 
> > > > > > > > >> addr,
> > > > > > > > >>                                hwaddr *plen, bool is_write)
> > > > > > > > >>  {
> > > > > > > > >> --
> > > > > > > > >> 2.25.1
> > > > > > > >
> > > > > > > > Thanks
> > > > > > > >
> > > > > > > > Eric
> > > > > > > >
> > > > >
> > >
>




reply via email to

[Prev in Thread] Current Thread [Next in Thread]