[Texi2html-cvs] Changes to texi2html/Tests/xemacs_frame_res/xemacs_29.html

[Patrice Dumas]

Index: texi2html/Tests/xemacs_frame_res/xemacs_29.html
diff -u texi2html/Tests/xemacs_frame_res/xemacs_29.html:1.20 
texi2html/Tests/xemacs_frame_res/xemacs_29.html:1.21
--- texi2html/Tests/xemacs_frame_res/xemacs_29.html:1.20        Tue Aug  9 
17:19:26 2005
+++ texi2html/Tests/xemacs_frame_res/xemacs_29.html     Tue Aug 23 23:51:17 2005
@@ -170,7 +170,7 @@
 
 <p>  Calendar mode lets you move through the calendar in logical units of
 time such as days, weeks, months, and years.  If you move outside the
-three months originally displayed, the calendar display &quot;scrolls&quot;
+three months originally displayed, the calendar display &ldquo;scrolls&rdquo;
 automatically through time to make the selected date visible.  Moving to
 a date lets you view its holidays or diary entries, or convert it to other
 calendars; moving longer time periods is also useful simply to scroll the
@@ -466,7 +466,7 @@
 <a name="IDX1184"></a>
 <a name="IDX1185"></a>
 <p>  The commands <kbd>C-v</kbd> and <kbd>M-v</kbd> scroll the calendar by an 
entire
-&quot;screenful&quot;--three months--in analogy with the usual meaning of
+&ldquo;screenful&rdquo;&mdash;three months&mdash;in analogy with the usual 
meaning of
 these commands.  <kbd>C-v</kbd> makes later dates visible and <kbd>M-v</kbd> 
makes
 earlier dates visible.  These commands take a numeric argument as a
 repeat count; in particular, since <kbd>C-u</kbd> multiplies the next command
@@ -701,8 +701,8 @@
 </p></dd>
 </dl>
 
-<p>  Some of these commands print the calendar sideways (in &quot;landscape
-mode&quot;), so it can be wider than it is long.  Some of them use Filofax
+<p>  Some of these commands print the calendar sideways (in &ldquo;landscape
+mode&rdquo;), so it can be wider than it is long.  Some of them use Filofax
 paper size (3.75in x 6.75in).  All of these commands accept a prefix
 argument which specifies how many days, weeks, months or years to print
 (starting always with the selected one).
@@ -942,8 +942,8 @@
 
 <p>  These calendar commands display the dates and times of the phases of
 the moon (new moon, first quarter, full moon, last quarter).  This
-feature is useful for debugging problems that &quot;depend on the phase of
-the moon.&quot;
+feature is useful for debugging problems that &ldquo;depend on the phase of
+the moon.&rdquo;
 </p>
 <dl compact="compact">
 <dt> <kbd>M</kbd></dt>
@@ -996,7 +996,7 @@
 <h3 class="subsection"> 26.2.4 Conversion To and From Other Calendars </h3>
 
 <p>  The Emacs calendar displayed is <em>always</em> the Gregorian calendar,
-sometimes called the &quot;new style&quot; calendar, which is used in most of
+sometimes called the &ldquo;new style&rdquo; calendar, which is used in most of
 the world today.  However, this calendar did not exist before the
 sixteenth century and was not widely used before the eighteenth century;
 it did not fully displace the Julian calendar and gain universal
@@ -1022,8 +1022,8 @@
 
 <p>  If you are interested in these calendars, you can convert dates one at a
 time.  Put point on the desired date of the Gregorian calendar and press the
-appropriate keys.  The <kbd>p</kbd> is a mnemonic for &quot;print&quot; since 
Emacs
-&quot;prints' the equivalent date in the echo area.
+appropriate keys.  The <kbd>p</kbd> is a mnemonic for &ldquo;print&rdquo; 
since Emacs
+&ldquo;prints' the equivalent date in the echo area.
 </p><hr size="6">
 <a name="Calendar-Systems"></a>
 <a name="SEC314"></a>
@@ -1107,8 +1107,8 @@
 into solar years.  The years go in cycles of sixty, each year containing
 either twelve months in an ordinary year or thirteen months in a leap
 year; each month has either 29 or 30 days.  Years, ordinary months, and
-days are named by combining one of ten &quot;celestial stems&quot; with one of
-twelve &quot;terrestrial branches&quot; for a total of sixty names that are
+days are named by combining one of ten &ldquo;celestial stems&rdquo; with one 
of
+twelve &ldquo;terrestrial branches&rdquo; for a total of sixty names that are
 repeated in a cycle of sixty.
 </p>
 <hr size="6">
@@ -1198,11 +1198,11 @@
 Calendars</kbd> from the menu that appears.  This displays the equivalent
 forms of the date in all the calendars Emacs understands, in the form of
 a menu.  (Choosing an alternative from this menu doesn't actually do
-anything--the menu is used only for display.)
+anything&mdash;the menu is used only for display.)
 </p>
 <p>  Put point on the desired date of the Gregorian calendar, then type the
-appropriate keys.  The <kbd>p</kbd> is a mnemonic for &quot;print&quot; since 
Emacs
-&quot;prints&quot; the equivalent date in the echo area.
+appropriate keys.  The <kbd>p</kbd> is a mnemonic for &ldquo;print&rdquo; 
since Emacs
+&ldquo;prints&rdquo; the equivalent date in the echo area.
 </p>
 <hr size="6">
 <a name="From-Other-Calendar"></a>
@@ -1292,7 +1292,7 @@
 <a name="IDX1263"></a>
 <a name="IDX1264"></a>
 <p>  One common question concerning the Hebrew calendar is the computation
-of the anniversary of a date of death, called a &quot;yahrzeit.&quot;  The 
Emacs
+of the anniversary of a date of death, called a &ldquo;yahrzeit.&rdquo;  The 
Emacs
 calendar includes a facility for such calculations.  If you are in the
 calendar, the command <kbd>M-x list-yahrzeit-dates</kbd> asks you for a
 range of years and then displays a list of the yahrzeit dates for those
@@ -1725,8 +1725,8 @@
 <a name="IDX1288"></a>
 <a name="IDX1289"></a>
 <a name="IDX1290"></a>
-<p>  If you prefer the European style of writing dates--in which the day
-comes before the month--type <kbd>M-x european-calendar</kbd> while in the
+<p>  If you prefer the European style of writing dates&mdash;in which the day
+comes before the month&mdash;type <kbd>M-x european-calendar</kbd> while in the
 calendar, or set the variable <code>european-calendar-style</code> to 
<code>t</code>
 <em>before</em> using any calendar or diary command.  This mode interprets
 all dates in the diary in the European manner, and also uses European
@@ -1929,8 +1929,8 @@
 
 <p>The 11 specifies November (the eleventh month), the 4 specifies Thursday
 (the fourth day of the week, where Sunday is numbered zero), and the
--1 specifies &quot;last&quot; (1 would mean &quot;first&quot;, 2 would mean
-&quot;second&quot;, -2 would mean &quot;second-to-last&quot;, and so on).  The
+-1 specifies &ldquo;last&rdquo; (1 would mean &ldquo;first&rdquo;, 2 would mean
+&ldquo;second&rdquo;, -2 would mean &ldquo;second-to-last&rdquo;, and so on).  
The
 month can be a single month or a list of months.  Thus you could change
 the 11 above to <samp>`'(1 2 3)'</samp> and have the entry apply to the last
 Thursday of January, February, and March.  If the month is <code>t</code>, the
@@ -2182,7 +2182,7 @@
 sometimes a list of holidays).
 </p>
 <p>  Here is a table of the possible kinds of holiday form.  Day numbers
-and month numbers count starting from 1, but &quot;dayname&quot; numbers
+and month numbers count starting from 1, but &ldquo;dayname&rdquo; numbers
 count Sunday as 0.  The element <var>string</var> is always the
 name of the holiday, as a string.
 </p>
@@ -2419,7 +2419,7 @@
 <h4 class="subsubsection"> 26.5.8.5 Daylight Savings Time </h4>
 
 <p>  Emacs understands the difference between standard time and daylight
-savings time--the times given for sunrise, sunset, solstices,
+savings time&mdash;the times given for sunrise, sunset, solstices,
 equinoxes, and the phases of the moon take that into account.  The rules
 for daylight savings time vary from place to place and have also varied
 historically from year to year.  To do the job properly, Emacs needs to
@@ -2564,8 +2564,8 @@
 month name, and day name of the date being considered.  The symbols that
 match numbers allow leading zeros; those that match names allow
 three-letter abbreviations and capitalization.  All the symbols can
-match <samp>`*'</samp>; since <samp>`*'</samp> in a diary entry means 
&quot;any day&quot;, &quot;any
-month&quot;, and so on, it should match regardless of the date being
+match <samp>`*'</samp>; since <samp>`*'</samp> in a diary entry means 
&ldquo;any day&rdquo;, &ldquo;any
+month&rdquo;, and so on, it should match regardless of the date being
 considered.
 </p>
 <p>  The default value of <code>diary-date-forms</code> in the American style 
is
@@ -2586,8 +2586,8 @@
 <p>  The date patterns in the list must be <em>mutually exclusive</em> and
 must not match any portion of the diary entry itself, just the date and
 one character of whitespace.  If, to be mutually exclusive, the pattern
-must match a portion of the diary entry text--beyond the whitespace
-that ends the date--then the first element of the date pattern
+must match a portion of the diary entry text&mdash;beyond the whitespace
+that ends the date&mdash;then the first element of the date pattern
 <em>must</em> be <code>backup</code>.  This causes the date recognizer to back
 up to the beginning of the current word of the diary entry, after
 finishing the match.  Even if you use <code>backup</code>, the date pattern
@@ -2753,7 +2753,7 @@
 <p>this enables fancy diary display.  It displays diary entries and
 holidays by copying them into a special buffer that exists only for the
 sake of display.  Copying to a separate buffer provides an opportunity
-to change the displayed text to make it prettier--for example, to sort
+to change the displayed text to make it prettier&mdash;for example, to sort
 the entries by the dates they apply to.
 </p>
 <p>  As with simple diary display, you can print a hard copy of the buffer
@@ -3345,8 +3345,8 @@
 <p>  To run a subshell interactively with its typescript in an XEmacs
 buffer, use <kbd>M-x shell</kbd>.  This creates (or reuses) a buffer named
 <samp>`*shell*'</samp> and runs a subshell with input coming from and output 
going
-to that buffer.  That is to say, any &quot;terminal output&quot; from the 
subshell
-will go into the buffer, advancing point, and any &quot;terminal input&quot; 
for
+to that buffer.  That is to say, any &ldquo;terminal output&rdquo; from the 
subshell
+will go into the buffer, advancing point, and any &ldquo;terminal input&rdquo; 
for
 the subshell comes from text in the buffer.  To give input to the subshell,
 go to the end of the buffer and type the input, terminated by <kbd>RET</kbd>.
 </p>
@@ -3555,11 +3555,11 @@
 output going to that buffer.
 </p>
 <p>All the normal keys that you type are sent without any interpretation
-by XEmacs directly to the subshell, as &quot;terminal input.&quot;
-Any &quot;echo&quot; of your input is the responsibility of the subshell.
+by XEmacs directly to the subshell, as &ldquo;terminal input.&rdquo;
+Any &ldquo;echo&rdquo; of your input is the responsibility of the subshell.
 (The exception is the terminal escape character,
 which by default is <kbd>C-c</kbd>. see section <a href="#SEC342">Term 
Mode</a>.)
-Any &quot;terminal output&quot; from the subshell goes into the buffer,
+Any &ldquo;terminal output&rdquo; from the subshell goes into the buffer,
 advancing point.
 </p>
 <p>  Some programs (such as XEmacs itself) need to control the
@@ -3886,7 +3886,7 @@
 <p>  In general, XEmacs tries to avoid using recursive edits.  It is
 usually preferable to allow users to switch among the possible editing
 modes in any order they like.  With recursive edits, the only way to get
-to another state is to go &quot;back&quot; to the state that the recursive edit
+to another state is to go &ldquo;back&rdquo; to the state that the recursive 
edit
 was invoked from.
 </p>
 <hr size="6">
@@ -4082,7 +4082,7 @@
 familiar, vi-like fashion.  Viper provides various different
 levels of vi emulation, from a quite complete emulation that
 allows almost no access to native XEmacs commands, to an
-&quot;expert&quot; mode that combines the most useful vi commands with
+&ldquo;expert&rdquo; mode that combines the most useful vi commands with
 the most useful XEmacs commands.
 </p>
 <p>To start Viper, put the command