automake
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Problems getting dependencies compiled before executable....


From: Santosh
Subject: Re: Problems getting dependencies compiled before executable....
Date: Thu, 12 Jun 2003 21:40:05 +0530 (IST)

For files in same directory, it does compile according to 
dependencies order. But for directories, it follows the order you give.
Why does it not do automatically according to dependency, 
I do not know. I think it is good if you have the dependencies between
modules clearly with you while designing and use it to give the order
to automake.

with regards,
Santosh.

On Wed, 11 Jun 2003 address@hidden wrote:

> Thanks for the reply.  I would do it as you said also.
> 
> My goal was to find out why _DEPENDENCIES is not doing
> 
> what I think it should.  Even though this example is
> 
> contrived, the same problem happens in examples that
> 
> are not.
> 
> 
> If a dependency of a target is not built, then Makefile
> 
> should build the dependency first.  That is not what
> 
> is happening here.  Why can't Makefile go to right
> 
> directory to build the dependency???
> 
> Chris
>  -------- Original Message --------
>    Subject: Re: Problems getting dependencies compiled before executable....
>    From: Santosh <address@hidden>
>    Date: Wed, June 11, 2003 10:12 pm
>    To: address@hidden
> 
>    Why not have the executable outside and the library
>    in a subdirectory. That is how I put my libraries.
> 
>    src/main.c
>    src/helperfunctions/helperfunctions.a
> 
>    with regards,
>    Santosh.
> 
>    On Tue, 10 Jun 2003
>    address@hidden wrote:
> 
>    > Assar
>    >
>    > Thanks for the email. I am using Red Hat 8 which means
>    > automake 1.6 and autoconf 2.53.  I spent some time
>    > creating a very *simple* example like you requested.
>    > I'd be very grateful if you looked at it....
>    >
>    > In order to show you my problem with _DEPENDENCIES I
>    > intentionally put the executable in src/exec and
>    > the library stuff in src.  Since the executable in
>    > src/exec cannot be built without the library in src
>    > being built *first*, I was hoping build process would
>    > realize this and adjust accordingly.  It didn't and
>    > I got error message I want to fix.
>    >
>    > Here are the contents of 2 Makefile.am's that need to be fixed.....
>    >
>    > src/Makefile.am:
>    > -----------------------------------------
>    >
>    > noinst_LIBRARIES             = libhelperfunctions.a
>    > libhelperfunctions_a_SOURCES = printmessage1.c
>    >                                printmessage1.h
>    >                                printmessage2.c
>    >                                printmessage2.h
>    >                                printmessage3.c
>    >                                printmessage3.h
>    > SUBDIRS                      = exec
>    >
>    >
>    > src/exec/Makefile.am
>    > -----------------------------------------
>    >
>    > bin_PROGRAMS      = main
>    > main_SOURCES      = main.c
>    > main_LDADD        = -lhelperfunctions -lpthread -lm
>    > main_DEPENDENCIES = ../libhelperfunctions.a
>    > main_LDFLAGS      = -L ../
>    > INCLUDES          = -I ../
>    >
>    > Here is what happens when I type make at top of source tree
>    > (BTW: $(top_srcdir) = /home/seberino/MAIN/Wb/efe2)....
>    >
>    > Making all in src
>    > make[1]: Entering directory `/home/seberino/MAIN/Wb/efe2/src'
>    > Making all in exec
>    > make[2]: Entering directory `/home/seberino/MAIN/Wb/efe2/src/exec'
>    > make[2]: *** No rule to make target `../libhelperfunctions.a',
>    > needed by `main'.  Stop.
>    > make[2]: Leaving directory `/home/seberino/MAIN/Wb/efe2/src/exec'
>    > make[1]: *** [all-recursive] Error 1
>    > make[1]: Leaving directory `/home/seberino/MAIN/Wb/efe2/src'
>    > make: *** [all-recursive] Error 1
>    >
>    >
>    > Here is a listing of entire source tree before doing anything...
>    >
>    >
>    > (laptop /home/seberino/MAIN/Wb/efe2) % ls -lR
>    > .:
>    > total 24
>    > drwxrwxr-x    3 seberino seberino     4096 Jun 10 11:23 ./
>    > drwxrwxr-x   15 seberino seberino     4096 Jun 10 10:51 ../
>    > -rwxrwxr-x    1 seberino seberino      149 Jun 10 10:51 bootstrap
>    > -rw-rw-r--    1 seberino seberino      177 Jun 10 10:58 configure.ac
>    > -rw-rw-r--    1 seberino seberino       14 Jun 10 10:51 Makefile.am
>    > drwxrwxr-x    4 seberino seberino     4096 Jun 10 11:24 src/
>    >
>    > ./src:
>    > total 44
>    > drwxrwxr-x    4 seberino seberino     4096 Jun 10 11:24 ./
>    > drwxrwxr-x    3 seberino seberino     4096 Jun 10 11:23 ../
>    > drwxrwxr-x    2 seberino seberino     4096 Jun 10 11:24 exec/
>    > -rw-rw-r--    1 seberino seberino      380 Jun 10 10:56 Makefile.am
>    > -rw-rw-r--    1 seberino seberino      189 Jun 10 10:51
>    > printmessage1.c -rw-rw-r--    1 seberino seberino      249 Jun 10
>    > 10:51 printmessage1.h -rw-rw-r--    1 seberino seberino      189 Jun
>    > 10 10:51 printmessage2.c -rw-rw-r--    1 seberino seberino      249
>    > Jun 10 10:51 printmessage2.h -rw-rw-r--    1 seberino seberino
>    > 189 Jun 10 10:51 printmessage3.c -rw-rw-r--    1 seberino seberino
>    >    249 Jun 10 10:51 printmessage3.h
>    >
>    > ./src/exec:
>    > total 16
>    > drwxrwxr-x    2 seberino seberino     4096 Jun 10 11:24 ./
>    > drwxrwxr-x    4 seberino seberino     4096 Jun 10 11:24 ../
>    > -rw-rw-r--    1 seberino seberino      625 Jun 10 10:51 main.c
>    > -rw-rw-r--    1 seberino seberino      202 Jun 10 11:07 Makefile.am
>    >
>    >
>    > Thanks!
>    >
>    > Chris
>    >
>    >
>    >
>    >
>    >  -------- Original Message --------
>    >    Subject: Re: Problems getting dependencies compiled before
>    >    executable.... From: Assar Westerlund <address@hidden>
>    >    Date: Fri, June 6, 2003 10:38 pm
>    >    To: <address@hidden>
>    >
>    >    <address@hidden> writes:
>    >    > I would have preferred that build system would see
>    >    >
>    >    >    myprogram_DEPENDENCIES = libmylibrary.a
>    >    >
>    >    > and automatically known to build library FIRST.
>    >
>    >    Why don't you use myprogram_LDADD = libmylibrary.a ?
>    >
>    >    I'm not able to reproduce your problem.  Can you tell us what
>    >    version of automake you're running and show us a minimal example
>    >    that shows the problem?
>    >
>    >
>    >
>    >
>    >
> 
>    --
>       Santosh Gangwani
>       Software Engineer,
>       Technology and Consultancy Centre (TCC),
>       IIIT (International Institute of Information Technology)
>            Opposite CMC, Gachibowli
>            Hyderabad - 500019
>            Ph: 91-40-3001967, 91-40-3001969
>            Fax: 91-40-3001413
> 
> 
> 






reply via email to

[Prev in Thread] Current Thread [Next in Thread]